• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.33-42
• /
• 2010

Recently, the reduction of greenhouse gases(GHG) for climate change is the most important international issue. In order to control efficiency GHG emission rate reduction, it is essential to establish GHG emission inventory preferentially. The emission of ships that are emitting its $CO_2$ in international waters is becoming chief among the issues which country is put under an obligation. In the IMO reports, shipping is estimate to emit 1,046million tonnes of $CO_2$, which corresponds to 3.3% of global emission during 2007. International shipping is estimated to have emitted 870 million tonnes, about 2.7% of global emission of $CO_2$ in 2007. In this study, the general information of GHG emission, based on fuel consumption statistic, Tier 1, and the emission inventory is calculated to break down in to domestic and international emission. The GHG emission from ships in Korea was total 31,646 Gg $CO_2$-eq in 2009, which is included fishing, Korea flag coastal ship, Korea flag ocean going ship and foreign flag ships. And domestic emission and international emission was 5,398Gg $CO_2$-eq, 7,630Gg $CO_2$-eq and foreign flag ship was 18,618Gg $CO_2$-eq respectively.

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.65-80
• /
• 2018

This paper attempts to estimate GHG emissions, primarily $CO_2$ ship emissions, at the port of Incheon in October 2014. This study employed a bottom-up approach based on Automatic Identification System (AIS) data to estimate the total amount of fuel consumption and the total amount of $CO_2$ emission produced as a result of fuel combustion. Using a sample of 330 ships operating at the port of Incheon in Korea, the total amount of $CO_2$ gases emitted from ships in October 2014 were estimated to be 164693.06 tons, with estimated total fuel consumption of 51953.64 tons. General cargo ships were most common type of ships, but they were less polluting compared to passenger ships. The detailed emission estimates by ship type revealed that passenger ships were the most polluting ships (81409.6 tons of emissions), followed by tugboats (37248.4 tons), cargo ships (32154.6 tons), ships used for other activities (9039.1 tons), chemical tankers (4027.06 tons), and fishing ships (814.048 tons), respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.905-917
• /
• 2021

Atmospheric pollutant emissions, mainly exhaust gas emissions from vessels, and the resultant social costs of pollution in the Korean harbor cities of Incheon, Mokpo, Gwangyang, Busan and Ulsan, are examined in this study, and the need for an emissions reduction plan is highlighted. Busan had several vessels entering its port, while Mokpo had few vessels, yet the vessels emission contribution was high in both the cities. Ulsan had world-class heavy-chemical industries, Gwangyang had steel mills and Incheon had a manufacturing industry and more vessels entering its port than Mokpo, yet the emission contribution was low in these cities. By calculating exhaust gas emissions from the vessels, it was found that CO₂ was the highest, followed by NOx and SOx. By vessel type, Busan, Ulsan, and Incheon had more oil tank vessels, Gwangyang had more cargo vessels, and Mokpo had more ferries. As a result of social cost, Busan paid the highest, while the highest emission was PM. The use of low-sulfur oil can directly reduce PM and, SOx emissions and indirectly reduce NOx emissions. However, in order to reduce high CO₂ emissions, only low-sulfur oil will not help. Therefore, the study suggested the need for reduction plan that use of fossil fuels, by using alternative maritime power (AMP).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.65-71
• /
• 2011

Since 2003, policies and practices related to the reduction of CO₂ gas emission from ships has been discussing by the International Maritime Organization. The representative emission index and indicator are the EEDI (Energy Efficiency Design Index) for the new ships and EEOI (Energy Efficiency Operational Indicator) during the voyage. For the CO₂ emission monitoring system, the SEEMP (Ship Energy Efficiency Management Plan) is also on the table. This global preparations to reduce theCO₂ emission is not except for the surface transportation. This research report elucidates the recent stream on the IMO CO₂ emission from ship and detail explanation on the EEDI and EEOI.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.27
• /
• pp.15-24
• /
• 2009

최근 IMO에서는 온실가스 배출을 규제화 하고자 하는 동향이 있으며 조만간 선박에서 온실가스 배출의 규제가 실현될 것으로 예상된다. 선박에서 배출되는 온실가스는 CO$_2$가 대부분을 차지하고 있으며 세계경제상황에 따른 영향이 고려되지만 지속적으로 증가추세에 있는 CO$_2$를 감소시키기 위한 아국의 대처방안이 필요한 시점이다. 또한 향후 발효될 EEDI를 소개하고 결과적으로 GHG를 저감시키기 위한 방안인 선형개선, 폐열회수시스템, 친환경연료사용기관, SEMP 등에 관한 내용을 다루어 보았다. 이 보고서에서는 GHG를 비롯한 NOx, SOx 및 PM과 같은 유해배출물질을 Top Down방식으로 평가함으로써 선박에서 기인하는 대기오염물질 관련 국내정책 및 해운산업의 장기적인 발전전략에 유용하게 사용될 것으로 기대한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1063-1069
• /
• 2022

According to domestic air pollutant emission statistics, a considerable amount of air pollutants is generated by ships. Therefore, various policies are being implemented to limit air pollutant emissions from ships and improve the air quality in ports. In addition, international conventions are carried out for the prevention of marine pollution by ships. However, because few studies and experiments have been conducted on the measurement of air pollutants emitted from actually operating ships, this study presented a method and possibility for evaluating air pollutant emissions from a 9,196GT ship actually operating using a portable emission measurement system (PEMS). A difference in emission occurred depending on the RPM and load, and the emission of NO_X was 497-2,060ppm, CO₂ was 1.55-6.9%, and CO was 0.002-0.14%. The emission specified in the shop test provided by the engine manufacturer differed from the actual emission measured. This study proved that the maximum emission of each air pollutant generated in the entire sailing section of the ship was included in the PEMS measurement range, and the possibility of using PEMS for ships within 10,000GT was verified.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.229-234
• /
• 2010

Recently, nations around the world are putting various efforts in many aspects to decrease greenhouse gases and international cooperation is urgently required. As part of these efforts, the shipping industry is working towords establishing "green parts" that reduce the carbon content of the greenhouse gases emitted in ports and can also decrease the operating costs. This study has tried to look for how to supply shore power instead of suppling ship's own generated power as a basic researches for reduction of carbon emissions and construction of "green parts" system. And in this paper, the training ship 'SAENURI' of Mokpo Maritime University under actual operation was selected to investigate for environmental and expense effects. The results of this study showed that $CO_2$ emissions Mere reduced 34% and operating costs Mere reduced approximately 31% in case of using the shore paper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.595-602
• /
• 2012

In this study, for the purpose of reduction of $CO_2$ gas emission and to increase recovery of waste heat from ships, the ORC (Organic Rankine Cycle) is investigated and offered for the conversion of temperature heat to electricity from waste heat energy from ships. Simulation was performed with waste heat from the exhaust gasse which is relatively high temperature and cooling sea water which is relatively low temperature from ships. Various fluid is used for simulation of the ORC system with variable temperature and flow condition and efficiency of system and output power is compared. Finally, 2,400kW output power is obtained by system optimization of the preheater and reheater utilizing waste heat form sea water cooling system.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.701-708
• /
• 2011

In this study, the emissions of GHG from general ships were calculated by Tier1 method based on the fuel consumption, and by Tier3 method based on the activities data such as power and SFOC of each engine, sailing characteristics (e.g. time and load factor, etc.) considering the ship type. In 2009, the emissions of GHG by Tier1 and Tier3 method were appeared 28.27 mega-ton $CO_{2eq}$ and 30.81 mega-ton $CO_{2eq}$. The emissions by Tier3 were slightly more than those by Tier1. We found that the values of the sailing characteristics for surveyed data are overestimated slightly. In the near future, more detailed researches for sailing characteristics considering ship types would be needed for sailing, anchoring, and berthing condition, etc.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.164-166
• /
• 2018

최근 전 세계적으로 수송수단과 산업시설에서의 배출로 인한 대기오염의 심각성을 강조하고 있다. 특히 항만과 공항에서도 대기오염의 중요성을 인지하고 있고 지역별 대기오염물질 배출 및 대기오염도 현황을 분석하여 각 시설에서의 종합관리방안을 도출하고 있다. 2020년부터 시행되는 국제해사기구(IMO)의 선박에서 배출되는 온실가스 즉, 황성분을 포함한 연소배기가스 중 CO2, SOX,NOX, PM2.5의 배출규제에의 대응과 배출규제해역(ECA)제도 도입에 따른 업계와 정부, 학회의 대비도 빠르게 진행되고 있다. 부산항에서도 항내계류선박과 하역장비에서의 오염물질 배출을 억제하기 위한 대체전력공급(AMP, Cold Ironing)에 대해 대응하고 있다. 본 연구는 도시주민의 건강을 위협하는 미세먼지(PM2.5)의 심각성과 배출가스의 저감을 위한 방안을 소개하고 오히려 이를 해운항만에서의 4차산업 발전의 계기로 대응하도록 하는 방향을 제시하고자 하였다. 산업화 과정에서 필연적인 대기오염을 저감시키는 방안이 새로운 해양산업으로 전환하기를 기대한다.