• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.103-105
• /
• 2016

Shin(2015) etc. published use of smart phones on the effect the use of smart phones released in the ship duty performed by survey of using smart phones Status and Usage in previous studies, soon as the survey provided this environment(36% on sailing) where you can use your smart phone from the ship, at the risk of officers using survey questionnaires were analyzed smart phones that use about twice the risk than before. In this study, maritime those who have experienced a period of sailors aboard a diagnostic test subjects Ship Handling Simulation analysis evaluation item of Maritime Traffic Admit, Proximity evaluation of a ship evaluation, by measuring the degree of danger that the subjective evaluation and control of the ship evaluation to evaluate the risk on navigation safety. Also indicated the risk of a smart phone quantitatively by measuring the time that the awareness of dangerous situation depending on using smart phone or not.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.71-76
• /
• 2005

Many sea accidents such as collisions and groundings of vessels were occurred due to the lack of sufficient manoeuvring capability of vessels. Therefore IMO adopted 'The interim standards of ship manoeuvrability by Resolution A.751(18) and the standards have been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standards are divided into three kinds as bellows; (1) Turning capability standards : Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standards : Estimated values in design stage are to be certified by $10^\sqsubset\;and\;20^\sqsubset$ Zig-Zag tests of the actual vessel. (3) Shortest stopping distance standards : Estimated values in design stage are to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors computed the values of the manoeuvring standards of several vessels from their original design and compared them with those results from experiments of the model ships and also examined the values and concluded about the validity of IMO Manoeuvrability standards.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.365-370
• /
• 2005

Many sea accidents such as collisions and groundings of vessels were occurred due to the lack of sufficient manoeuvring capability of vessels. Therefore IMO adopted 'The interim standards of ship manoeuvrability by Resolution A.751(18)' and the standards have been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless qf the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standards are divided into three kinds as bellows; (1) Turning capability standards : Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standards : Estimated values in design stage are to be certified by $10^{\circ}\;and\;20^{\circ}$ Zig-Zag tests of the actual vessel. (3) Shortest stopping distance standards : Estimated values in design stage are to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors computed the values of the manoeuvring standards of several vessels from their original design and compared them with those results from experiments of the model ships and also examined the values and concluded about the validity of IMO manoeuvrability standards.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.393-399
• /
• 2010

Recently, a vessel's maneuvering performance is considered to be an important subject as marine pollution from the ships that stranded on a rock becomes more severe. So, IMO(International maritime organization) has adopted Resolution MSC.l37 to enhance international standards of ship's maneuverability. There's more than one way to improve ship's maneuverability. This research focused on improving ship's maneuverability by high-lift rudder. To predict the maneuverability, the numerical simulation model was used. The evaluation of maneuverability was carried out by turning test and zig-zag test. The results obtained with these simulation showed that the high-lift rudder would be effective in improving the turning ability of the ship. But it was clarified that there Has a possibility that course changing ability night become bad through an increase of rudder lift.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.157-162
• /
• 2008

The ship's maneuverability is the important factor to avoid ship's collisions. The ship's maneuverability is usually measured in a deep water, and the turning ability is decreased and the course stability is improved in a shallow water. The variation of the turning ability could cause the risk of collision. In this paper, we proposes application technique of Variable Safe-Guard Ring to consider the shallow water effect and to be simple to estimate the grade of collision risk simultaneously. Through the mathematical simulation, the availability of new method was varified. Therefore this method is expected enough to support a maneuver for collision avoidance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.55-57
• /
• 2011

경인 아라뱃길이 2011년 10월 개장을 앞두고 있다. 경인 아라뱃길이 시작되는 경인항 서해갑문 입출거시 예선사용기준에 대한 연구는 선박운항의 경제성 측면에서 매우 중요한 의미를 지닌다고 할 수 있다. 통상 선박의 크기(톤수)에 따른 예선의 소요마력 및 사용 척수는 대상선박의 크기, 모양, 접근수로, 부두시설의 위치 및 종류, 기타 환경조건 등의 영향을 받으며, 선체에 작용하는 수면상부의 풍압력과 수면하부의 유압력을 고려하여 규정하고 있다. 따라서 본 연구에서는 국내외 예선 규정 및 대상선박에 대한 예선 조종시뮬레이션을 통하여 경인항 서해갑문 입출거시 사용되는 예선의 기준을 설정하였다.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.451-458
• /
• 2003

A ship with small metacentric height or high speed vessel performs relatively large roll angles in her manoeuvring motion. Roll coupling effect should be taken into consideration for accurate prediction of manoeuvring motion of such a ship. This paper proposes a new mathematical model of ship manoeuvring motion taking coupling effect of roll into consideration. Some kinds of manoeuvring motion are simulated by computer, based upon the proposed model. The simualted results by proposed model here are compared with those by existing model. The proposed model is found to be practical and useful for prediction of manoeuvring motion with roll effect.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.134-136
• /
• 2010

예선은 일반적인 선박에 비해 협소한 선교를 가지고 있으며, 부선의 상태/상황 및 감시를 하기 위해 후방을 주시해야 한다. 이러한 예선의 특성을 시뮬레이션 시스템에 반영하기 위해서는 여러 고려사항이 있다. 협소한 선교를 가진다는 점은 현재 한국해양 연구원 해양시스템안전연구소가 보유하고 있는 CDS(Collimated Dome Simulator)의 조종실을 사용함으로써 반영할 수 있다. 하지만, 이 시스템은 전방에 대한 가시화만을 지원하며, 후방 가시화를 위해서는 360도 디스플레이 방식을 사용하는 것이 최적이다. 본 논문에서는 현재 보유 중인 CDS에 예부선 시뮬레이션 가시화의 특성을 반영할 수 있는 후방 가시화에 대한 개발 방안에 대해 다루고자 한다. 추가적인 장비를 조종실(선교)의 뒤쪽에 설치함으로써 CDS가 가지는 단점을 해결할 수 있을 것으로 예상된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.515-517
• /
• 2013

We carried out the maritime safety audit for Sandal Water Bridge constructed between Geje-Do and Sandal-Do in 2015. To study as to whether can be secured the marine traffic safety for this area, this research investigated and performed the marine accident, marine traffic volume, the marine traffic flow simulation and shiphandling simulation. It is considered to be required the quantitative guidelines for maritime safety audit including audit target area and formal audit object etc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.1
• /
• pp.67-75
• /
• 2023

In this study, the dynamic characteristics of an offshore platform being installed and physical phenomena are analyzed from the perspective of interaction between operation and maneuvering simulation using a real-time Maneuvering & Operation simulator of Shipbuilding & Marine Simulation Center at Tongmyong University. It was simulated to install the semi-submersible drilling rig moored by 8 mooring lines according to a scenario that is similar to it on the real sea, and 4 tug boats for position keeping of the rig and an offshore support vessel for hook-up of the mooring lines were operated. During the simulation, the motion, trajectory, tension of the objects were output in real time, and they were analyzed at each work procedure. This study about the simultaneous simulation of operation and maneuvering showed the detailed motion of the offshore platform and ships on the operation procedure and the interaction between operation and maneuvering in specific environment condition. Also, it confirmed that the simulation can be utilized to determine the possibility of offshore platform installation in specific situations.