• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.274-280
• /
• 2005

The system parameters of gas turbine engine tend to change remarkably in real operating condition. It means that operators have to consider environment and suitably control fuel flow. The conventional PID controller, however, can not guarantee good control performance in the aspect of system parameter change. This paper, therefore, proposes a scheme for integrating PID control and fuzzy technique to obtain the good performance of gas turbine engine speed control on the whole operating range. The effectiveness of the proposed fuzzy PID controller is verified through computer simulation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1108-1112
• /
• 2005

Recently, the fuel charge is accounted for very high in the navigation cost. Therefore Shipowner is tried to find method for reducing oil consumption. ERCS(Energy Reduced Cooling System) is one of the method. The ERCS algorithm operates to decrease a power consumption of main sea water cooling pump through inverter control. We have developed ERCS controller with algorithm. The ERCS controller consists of CPU board, Digital I/O board, A/D board, D/A board and LCD/SW board. We tested with dummy signal to confirm the algorithm working correctly and achieved the good results. Before soon we will test under real condition in the ship and expect to get the result as forecasted.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.163-163
• /
• 2000

The tracking system on the moving vehicle is made up of two parts. One is a stabilizer which is flatting the system against the moving vehicle, the other is a tracker which is tracking the target. This makes use of the geometric information of the tracking target and that utilizes the dynamic information of the moving vehicle equipping the tracking system. Especially the stabilizer is very important for an ocean vehicle affected by wave, wind, and current. In this paper, the stabilizer of sun tracking system for a ship is developed.

• Journal of Institute of Control, Robotics and Systems
• /
• 제11권4호
• /
• pp.363-368
• /
• 2005

This paper proposes an LOS(line-of-sight) guidance system of a ship for path following. From the viewpoint of a control configuration, guidance is a special type of compensation algorithm that is placed in front of the controller to accomplish navigational objects. A guidance system generates a reference trajectory for trajectory tracking or path control and decides the desired velocity, position and heading angle. A control system executes commands based on a reliable guidance law during navigation. An LOS vector from the vessel to a point on the path between two way-points in straight-line navigation or a point among turning circle in turning navigation is selected, and then a heading angle is calculated to converge the desired path based on the LOS vector. The LOS guidance law is defined for the straight-line and the turning circle, respectively. The effectiveness of the suggested LOS guidance system is assured through computer simulation.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
• /
• pp.217-220
• /
• 2000

현재, 선박용 로프제조에서 로프의 제조 공정은 수작업에 의해 행해지고 있어 작업의 효율화와 품질의 균질화를 위해서 최적의 장력제어가 필요하다. 본 연구의 목적은 와이어 로프 제조공정의 자동화이고 로프의 제조 공정에서 장치는 로프를 릴에 감아 올릴 필요성은 거의 없기 때문에 케이블을 풀어주는 속도와 로드셀에 의해 장력을 검출하고 장력을 발생하는 하드웨어 구성방법을 연구하는 것이다. 본 연구는 현수형 와이어 로프(Catenary Rope)의 동적 모델링을 작성한다. 이 시스템에 대하여 교류서보 전동기를 이용한 장력 발생장치를 모델링한다. 현수형 시스템의 장력 계측 장치는 하중 변환기(load cell)를 사용하고 수학적 모델링을 행한다. 장력 계측 장치에 관해서 스프링 저울을 이용해 출력을 비교 검토한 결과, 인장력을 계측하는 장치로서의 유효성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권1호
• /
• pp.39-44
• /
• 2016

Automated voltage regulators (AVRs) are used on ships and offshore to automatically adjust the voltage based on real-time output voltage readings of the generator engine. Analog-type AVR was previously more commonly used, but is slowly being replaced with digital-type AVR because of increased demands of response time. This study presents a new digital AVR system that contains appropriate features of the AVR with respect to offshore unstable load conditions and poor operating conditions. Furthermore, experiments of load and voltage change prove the excellence of stability and response of the proposed system compared to previous AVR systems. Additionally, an integrated control system for a monitoring the output voltage and field current was developed to easily set the gain value.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.265-269
• /
• 2006

Anti-Roll Tanks, also called Sloshing Tanks, is a rather common and sometimes an efficient method of limiting the roll angles. The important parameters, when considering using anti-roll tanks, are positioning, size, duct area, flow control device etc. Measurement by the PIV(Particle Image Velocimetry) was conducted to investigate the flow characteristics around control damper and inlet area of duct for three kind of inclined angle $(\alpha=0^*,\;10^*\;and\;20^*)$. Flow behaviors such as instantaneous and time-mean velocity vectors are investigated. Furthermore, to reveal boundaries between flowing and stagnant zones and to extract velocity profiles at any selected sections of the lower duct for passive anti-rolling tanks system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제21권1호
• /
• pp.53-60
• /
• 2017

This paper is to design and implement the drone that supports a wideband multimedia communication and a long-range to save people in maritime. The drone is an Unnamed Aerial Vehicle (UAV) that is controlled by a radio wave not by people boarding the machine. We use the drone to respond quickly to the boating accident. To develop a smart drone for the high speed seamless video streaming in a long-range maritime, a necessary techniques are hardware design techniques that design structure of a drone, controlling techniques that operate a drone and communication techniques that control a drone in a long distance. In this paper, the limitations and techniques to design and implement the structure of drone supporting wideband multimedia communication for long-range maritime are explained. By expanding this communication drone network, it is aimed at improving utility of a drone.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.330-336
• /
• 2017

This study performs a root cause analysis of the sticking that occurs in the hydraulically actuated wet type multi-disc friction clutch in a ship's diesel engine propulsion system that uses rubber elastic coupling. The fishbone method was used to study the sticking through dismantling investigation of the reduction gear and clutch, investigation of the components, and onboard system tests including nondestructive testing. The friction plate sticking is caused by the slip due to friction heat resulting from the leakage of control oil through cracks in the assembled hollow shaft. The friction plate cooling oil also leaks simultaneously through the crack, and partial sticking occurs due to the hot spots in the friction plates. These are caused by insufficient amount of cooling oil due to oil leakage.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제26권5호
• /
• pp.383-389
• /
• 2016

In this paper, we present the hull blasting machine with vision-based weld bead recognition device for cleaning shipment exterior wall. The purpose of this study is to introduce the mechanism design of the high efficiency hull blasting machine using the vision system to recognize the weld bead. Therefore, we have developed a robot mechanism and drive controller system of the hull blasting robot. And hull blasting characteristics such as the climbing mechanism, vision system, remote controller and CAN have been discussed and compared with the experimental data. The hull blasting robots are able to remove rust or paint at anchor, so the re-docking is unnecessary. Therefore, this can save time and cost of undergoing re-docking process and build more vessels instead. The robot uses sensors to navigate safely around the hull and has a filter system to collect the fouling removed. We have completed a pilot test of the robot and demonstrated the drive control and CAN communication performance.