• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.225-227
• /
• 2023

선박의 안전운행을 지원하기 위해 다양한 정보를 신속하고 정확하게 파악할 필요가 있다. 이를 지원하기 위해 6종 개별 서비스를 표출하고, 별도의 데이터를 통합해서 표시하는 통합대시보드를 배치하여 종합적인 정보를 한눈에 확인할 수 있도록 하였다. 통합대시보드는 선박의 안전상태(충돌위험지수, 횡경사, 침수상태 등)를 시각적으로 확인이 용이하게 디자인 되었으며, 사고 발생 시 상태모니터링을 통해 신속한 의사결정이 가능하도록 구성하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.235-239
• /
• 2016

The capsizing speed of an unstable vessel with a lost restoring moment can be understood as a unique response to an accident situation, and is naturally affected by such parameters as moment of inertia, metacentric height, and transverse damping coefficient of the hull in the case of free roll motion. Additionally, it is supposed that the analysis of capsize accidents can be further simplified when a vessel's leaning velocity is shown to be quite low. Therefore, capsize accidents with low leaning speeds are desirably categorized in view of rescuing strategies, as opposed to fast capsize accidents, since the attitude of the declining hull can be properly estimated, which allows rescuers to have more time for helping accident cases. This study focuses on deriving some analytical equations based on the roll decay ratio parameter, which describes how a hull under a low-speed capsize is related to the situational hull characteristics. The suggested equations are applied to a particular ship to disclose the analytical responses from the model ship. It was confirmed that the results show the general characteristics of slow capsizing ships.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.138-143
• /
• 2004

This experimental paper deals with the performance of tanks that are turned the active A.R.T(Anti-Rolling Tank) when the fluid transfers from wing tank to the opposite tank by the power developed by the automatic control system (INTERING Stabilizer), which was installed in the fishery training ship T/S. A - RA (G/T:990 tons) of Cheju National University. In this paper, the author has tested the performance of INTERING Stabilizer for the signals obtained by the inclinometer in irregular waves and compared with the results obtained in passive mode operation at stop and at various ship speeds. The performances of the system were confirmed the results as follows through the tests: 1. The average amplitude and significant roll (${\pi}$1/3) of the passive and active mode operations in the condition of stoped engine and underway were obtained 8.30$^{\circ}$, 4.37$^{\circ}$, 8.30$^{\circ}$, 4.37$^{\circ}$, and 5.01$^{\circ}$, 4.36$^{\circ}$, 5.50$^{\circ}$, 5.10$^{\circ}$, respectively. 2. The rates of performance of active mode operations were carried out during a sea trial in the condition of stop engine and underway resulted in 47.5%, 12.7%, respectively, therefore the active mode operation estimated to be improved more than passive mode operation. 3. Active - A.R.T by INTERING Stabilizer didn't affect the amplitude of pitching.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.538-542
• /
• 2015

The transverse moment of inertia is an indispensable factor in analyzing the roll motion characteristics of ships and the calculating method needs to be based on the more reasonable theories when deciding the value as the results and reliability of analysis could be much affected by the correctness. However, the mass distribution and shape of hulls are quite complicated and give much difficulties in case of calculating the value directly from the ship design data, furthermore even acquiring the detailed design data for calculation is almost impossible. Therefore some simpler ways are practically adopted in the assumption that the gyradius of roll moment can be decided by a given ratio and hull width. It is well known that the responses of the free roll decay are varied according to the value of roll moment in view of roll period and amplitude decay ratio, so that the general formula to get the moment value can be derived also from the observation of roll decay responses. This study presents how the roll period and decay ratio are interrelated each other from the roll motion characteristics with suggesting a general formula to be able to calculate roll moment from it. Finally, the obtained general formula has been applied to a ship data to check the resultant characteristics through analyzing graphs and showed that the roll moment becomes more accurate when rolling period and decay ratio are considered together in calculation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.75-77
• /
• 2016

IMO는 해상에서의 선박 안전 향상을 위해 선박의 복원성능과 조종성능에 관한 국제적 기준을 제시하고 있다. 이러한 기준은 선박 연구자가 수행하는 연구의 방향에도 영향을 미치고 있다. 기존의 수행된 연구는 복원성능과 조종성능의 각각의 분야에서 독립적으로 수행되어 왔으며, 아직 두 분야의 상호 관계에 관한 연구는 미비한 실정이다. 이에 본 논문에서는 선박의 복원성능과 조종성능의 상호 관계를 정량적으로 규명하고자 기초적인 실험 연구를 수행하였다. 이를 위해 복원성능을 나타내는 지표인 GM과 선박의 조종성능을 나타내는 지표인 선회성능을 통해 두 항복 간 상호 관계의 정량적 분석을 시도하였다. 자유항주 모형선을 이용한 선회 시험을 실시하였고, 그 결과 GM 감소에 따른 선회반경 감소 및 초기 횡경사 각도 증가를 확인했으며, 그 변화의 경향은 서로 다르게 나타나는 것을 확인하였다.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.465-471
• /
• 2003

A coastwise chemical tanker sailing at full speed has capsized during turning in calm water. In the previous paper, we investigated the reasons of the accident by demonstrating the proper correction for the free surface effect of the liquid cargo and the bow-sinkage effect. In this paper, we also carry out model experiments of a transverse pressure under the seawater and an outward heel moment according to the heel angle and rudder angle, on the basis of radius of turning circle, ship's speed and drift angle of model ship occurring in turning. It is also shown that the flooding of seawater onto the deck occurring in turning generated a significant outward heel moment and increased the vertical distance between the center of gravity of the ship and the center of lateral water drag.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.195-200
• /
• 2018

When a ship accident occurs, it is imperative that the captain makes a prompt decision because the accident directly leads to the loss of human lives. The purpose of this study is to quantitatively analyze the main factors and to provide basic data for making decisions in case of ship related contingencies. Experts were surveyed using questionnaires containing eight main factors. The priorities based on relative importance of those factors were determined using the analytic hierarchy process (AHP). As a result, the main priority factors were capsizing (heeling occurs), and fire/explosion, which could have the greatest impact on decision making. We plan to do a larger, more detailed scale survey to improve the reliability of the results. The results above will be used as a basis for the main factors of ships and passenger evacuation decision-making procedures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.380-388
• /
• 2023

This study estimates the metacentric height (GM) of a model ship by varying the transverse weight distribution, considering the effects of the roll period and moment of inertia, and compares it with the GM values measured by the inclining test. In the process, the relationship between the values is analyzed. Three types of ships-a 7-ton fishing vessel, 20-ton fishing vessel, and KRISO Very Large Crude-oil Carrier (KVLCC)-were used for the experiment and comparison. The roll period and moment of inertia were measured using the free roll decay and swing frame tests, and the GM was measured using inclining test. The estimated GM from the roll period and moment of inertia showed the same trend as the GM measured using the inclining test in the change of the weight distribution. However, the GM values measured using the inclining test were lower. Therefore, additional correction factors or parameters other than the roll period and moment of inertia are necessary for estimating GM. In the future, the relationship between the weight center and the estimated GM will be analyzed to derive the correction factors.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.155-155
• /
• 2022

유조선 우이산호 부두시설 접촉사고는 광양항 원유 2부두에 접근 중 과도한 속력 등 도선사의 부적절한 도선으로 좌회두를 적절하게 통제하지 못해 발생한 사고이다. 광양항 원유 2부두에 접안하고자 하는 VLCC는 부두 법선을 감안하여 약 10도 이내의 경사각으로 서서히 속력을 감속하면서 부두 전면 해상으로 접근하여 부두로부터 선폭의 약 2~3배 거리에 정선시킨 다음 예선의 도움을 받아 접안 예정 선박을 횡방향으로 5~10 cm/s 속도로 평행 이동시켜 부두에 계류시키는 것이 통상적인 접안 방법이다. 하지만, 우이산호의 부두 접근 시 속력을 살펴보면, 부두 1마일 전에서 8.4노트, 부두 0.5마일 전에서 7.1노트, 그리고 부두 0.2마일 전에서 5.2노트로 정상적인 타 선박의 속력보다 2~3배 빠른 속력으로 부두에 접근하면서 예선을 사용하였음에도 속력제어에 실패하여 부두와 접촉한 사고이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.172-178
• /
• 1995

보강평판은 평판에 각종 보강재를 용접등의 방법에 의해서 종방향, 횡방향, 경사 또는 임의의 방향으로 부착시켜 굽힘 및 비틀림 강성을 향상시킨 구조요소이다. 이러한 구조요소는 구조적 필요성이나 경량화 설계에 따라 선박의 deck, 철도 차량, 항공기 및 자동차 등의 각종 구조물에서 부하능력 및 경제성을 증대시키기 위하여 널리 사용되고 있고, 또한 자동차용 오일팬, 가전기기의 케이싱과 모터의 케이싱등에도 사용되고 있다. 최근 현장에서는 이러한 구조물의 진동 감소 및 방진 문제가 큰 관심사가 되고 있다. 본 논문은 정사각형 알루미늄 평판에 +자 형태의 Box Beam 보강재를 편면 보강하고 4변 자유단의 경계 조건을 설정하였다. 보강재는 유한요소 정식화 과정을 통하여 평판 요소에 등가시키고, 2차원의 평판 구조로 보강 평판을 모델링하고 구조해석 프로그램인 ANSYS를 이용하여 해석하였다. 실험은 Impact Test에 의해서 주파수 응답 함수(FRF)를 각 시편에 대해서 구하고 이를 해석의 고유진동수와 비교하였다. 그리고 보강재가 임의의 각도로 평판에 부착되었을 때 고유진동수의 변화와 진동 모드(mode shape)를 분석하였다.