• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2140-2146
• /
• 2014

Ocean buoys are operated for safe navigation and collecting ocean data. Recently, to reducing marine buoy's damage by ocean weather's bad condition and collision with vessels has been conducted in several field research. This paper's experiment is buoy condition monitoring about predefined data form by users. As a result using Wireless remote control board applying a radio signal processing algorithms, it can observe buoy's state at an interval of three minutes on the land. Acquired data type is changeable according to ocean weather condition or buoy's purpose of using in advance. Also, this paper conducted an experiment such as data-transmission's stability and wireless communication's availability. As results of the analysis of the transmitted data, the solar, wind and wave power indicates the maximum amount of power, 50 W, 20 W and 40 W respectively. The communication system proven through this research can apply to buoy or other ocean facility.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.890-897
• /
• 2021

Since the enforcement of strict regulations on marine fuel oil sulfur content, demand for Low Sulfur Fuel Oil (LSFO) has been increasing. However, as LSFO properties vary greatly depending on the supply timing, region, and supplier, LSFOs can experience problems with sludge formation, blending compatibility, and stability once mixed into storage tanks. This study investigates using ultrasound cavitation effects to improve the quality of LSFOs in storage tanks. For marine gas oil (MGO), the results showed that the relative ratio of high molecular weight compounds to those of low molecular weight decreased after ultrasonic irradiation, due to cavitation-induced cracking of chemical bonds. For marine diesel oil (MDO) and blended oil, a small increase in the relative abundance of low weight molecular compounds was observed after treatment. However, no correlation between time and relative abundance was observed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1095-1101
• /
• 2020

Vessels or aircraft should be loaded with containers or cargo to maintain weight balance in order to be stable when navigating the route. The container loading algorithm is known as the NP problem and several heuristic methods have been studied. Containers can be characterized by the uniform volume and weight, which makes it easier to find an optimal loading method. In this paper, we propose an algorithm for weight balance when the volume and weight of an object are uniform. It is assumed that the loading space has a special structure of m * n mesh (where m and n are both odd). In this case, we designed a greedy algorithm and proved that the algorithm is optimal in that it can always find a loading position that maintains a weight balance regardless of the number of objects. Our algorithm can be used in many engineering problems, such as loading algorithms and load balancing problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1124-1129
• /
• 2021

The application area based on UAV (Unmanned Aerial Vehicle) is continuously increasing as time passing by. In particular the UAVs which consist of more than four horizontal propellers and the functionality of VTOL (Vertical Take-Off and Landing) are utilized in diverse platforms and the application products due to their safety and aerodynamically simpler design and architectures. The most UAV missions are controlled by GCSs (Ground Control System). The GCSs are generally connected to the internet and get electrical map and environmental information such as temperature, humidity, wind speed, wind direction and so on. In this paper, we design a system for UAV system to have capability of approaching to a certain ship and monitoring her efficiently by using AIS (Auto Identification System) information. Furthermore we verify that adapting AIS on GCS side is more efficient through experiments.

• Journal of Navigation and Port Research
• /
• v.43 no.3
• /
• pp.172-178
• /
• 2019

Although the needs for providing resilient PNT information are increasing, threats due to the intentional RFI or space weather change are challenging to resolve. eLoran, which is a terrestrial navigation system that use a high-power signal is considered as a best back-up navigation system. Depending on the user's environment in the eLoran system, the user may use one of E-field or H-field antennas. H-field antenna, which has no restriction on setting stable ground and is relatively resistant to noise of general electronic equipment, is composed of two loops, and shows anisotropic gain pattern due to the different measurement at the two loops. Therefore, the H-field antenna's phase estimation value of signal varies depending on its direction even at the static environment. The error due to the direction of the signal should be eliminated if the user want to estimate the own position more precisely. In this paper, a method to compensate the error according to the geometric distribution between the H-field antenna and the transmitting station is proposed. A model was developed to compensate the directional error of H-field antenna based on the signal generated from the eLoran signal simulator. The model is then used to the survey measurement performed in the land area and verify its performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.83-90
• /
• 2015

The car ferry operating between the mainland and the island plays an important role on transportation of goods and passengers. Therefore, the improvement of efficiency and safety as well as economic factor are importantly considered in the development process of car ferry. Double-ended car ferry is already popularized because of its economic feasibility and convenience for passenger in Europe and developed countries, and the demand is booming in domestic. In this paper, dynamic characteristics of propeller shaft and strength in double-ended car ferry are analyzed using campbell diagram and modal analysis. Based on the analysis of dynamic characteristics, resonant phenomenon and critical speed are stable when occurring the propeller shaft vibration due to forward and reverse propeller shaft working.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2223-2231
• /
• 2010

Recently, an important physical device of transportation, such as car, railroad, ship and aircraft has changed into electronic control unit. According to accident reports, the most of car accidents are caused by faults of embedded software loaded to computer control unit. The facts implies that the test to find defects in embedded software haven't performed sufficiently. As a result, it is necessary to establish the test procedures of embedded software based on safety assessment criteria. The objective of this proposal is to provide a unit test procedure complied with the safety assessment criteria for the embedded software. In addition, an effective unit testing procedure and defect analysis methods are proposed and a testing procedure using a safety criteria built-in tool is presented.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.451-459
• /
• 2006

When a ship is damaged and flooded, the motion of the damaged ship is significantly influenced by the flooding water dynamics. The flooding water in the damaged ship has been treated as a lumped mass under the quasi-static assumption in most of previous researches. To calculate the motion of damaged ship rigorously, it is necessary to analyze the coupled dynamics of flooding water. In this study, a series of numerical and experimental studies is conducted for the damaged part of ITTC RORO passenger. FLOW3D is used for investigating the feasibility of the state of the art CFD technique. An applicability of the coupled motion analysis of damaged ships can be confirmed by agreement between the numerical results and the model experiments. A CFD technique is considered for the numerical modeling of the dynamics of flooding water.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.22-31
• /
• 2006

When ironwork, especially steel roll coil, is transported to customers, land transportation and sea transportation are usually used. To transport steel roll coil fast and safe without damaging it, it is necessary that the steel roll coil has to be in stable condition. These days, apitong, which is all imported from overseas, is being used to support the steel roll coil, but because of apitong's rigidity, it damages the coil and when the coil is damaged, it is hard to fix. Due to the fact that recovering damage of the coil is almost impossible, we have to find the new type of dunnage that can substitute the apitong. In this paper, the arrays and the kinds of reinforcements, and rectangular type and trapezoid of dunnage will be talked about. The phenomenon of rolling and the impact when the carrier start moving and stop will be talked about as well. Therefore, we are going to develop a dunnage that does not damage ironwork and has better recovery and softness than existing apitong dunnage.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.3
• /
• pp.38-45
• /
• 1998

In this parer, the effects of a skeg, rudder and stern hull form on the manoeuvrability of a container carrier with small length to draft ratio have been investigated through a series of model test. Rudder open water tests and PMM tests were carried out with varying rudder area, afterbody appendages and stern hull form to investigate their effects on the manoeuvrability. The MMG model developed in Japan was used for the manoeuvring simulation with experimentally obtained hydrodynamic coefficients. The result showed that the effects by the variation of stern profile and the skeg below stern bulb are much larger than those by any other types of appendages in improving directional stability of the vessel.