• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.377-379
• /
• 2013

우리나라 항만 입출항 통항 선박의 대형화, 고속화에 따른 해양안전사고가 증가하고 있어 항만 연안 해역에서의 해상교통안전 확보가 절실히 요구되고 있는 실정으로, 최근 국제항로표지협회(IALA)에서 항로표지 설계와 배치계획에 대한 의사결정을 지원할 수 있는 항로표지 전문 기능 시뮬레이터의 개발과 주요 항로의 항로표지 설계 및 계획 등을 검증할 수 있는 시스템 필요성을 제기하였다. 우리나라 주요 항로의 항로표지 설계와 적정 배치 여부 등을 검증하고 보완할 수 있는 시뮬레이션 시스템이 필요하며 3차원 가상현실 기법을 이용하여 항로표지의 신설 및 이설에 따른 여러 가지 효과를 직관적으로 파악하고 대상 해역의 특성이 고려된 다양한 해상교통 환경 변화에 따른 항로표지의 신설 및 이설 효과를 선박 운항자 관점에서 검증하거나, 새로운 항만 항로 건설시 최적 항로표지 배치에 대한 의사결정을 지원하기 위한 항로표지용 시뮬레이터 시스템 개발이 진행되고 있다. 이러한 항로표지 시뮬레이터 개발에 필요한 항로표지 관련 3D 모델링의 구현 방법과 종류에 대하여 기술하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.122-133
• /
• 1999

Overlap, excessive wide gaps, and errors between blocks during erection process increases cost and man-hour. In this paper, a system to simulate the assembly process is suggested and a plane block assembly of welding deformation with gravity is simulated in consideration of assembly order, deformations and errors occurring in the cutting and forming processes are not considered and welding deformations are acquired by equivalent stiffness and load method from experiments and hull double bottom plane block is assembled on a assembly order by panel method. It is certified that according to the order of assembly, intermediate product shape affects rigidity which affects welding deformations. Assembly order must be considered in the assembly process. It is certified that the gravity has important role in the assembly process.

• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2012

In recent days, global shipbuilding companies have been showing great interest in eco-friendly ship products and trying to reduce environmental pollution - harmful gas and dust in shipbuilding process. Following this trend, Life Cycle Assessment (LCA) was carried out to an application of shipyards layout. LCA is a technique used to assess environmental impacts during the life cycle of products and systems. Until now, LCA has been used through ISO 14040 in somewhat limited industries, such as Building Life Cycle Assessment. Thus, this study analyzes the shipyard layout planning framework and builds life cycle inventory along with the simulation model structure to evaluate environmental impacts.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2010

In this paper, advanced evacuation analysis simulation on a passenger ship is performed. Velocity based model has been implemented and used to calculate the movement of the individual passengers under the evacuation situation. The age and gender of each passenger are considered as the factors of walking speed. Flocking algorithm is applied for the passenger's group behavior. Penalty walking velocity is introduced to avoid collision between the passengers and obstacles, and to prevent the position overlap among passengers. Application of flocking algorithm and penalty walking velocity to evacuation simulation is verified through implementation of the 11 test problems in IMO (International Maritime Organization) MSC (Maritime Safety Committee) Circulation 1238.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.5
• /
• pp.433-440
• /
• 2001

In this paper, we propose an automatic navigation system of ship using multivariable fuzzy control system in dynamic sea environment. The proposed multivariable fuzzy control system consists of two subsystems with three inputs and two outputs. The effectiveness of the proposed multivariable fuzzy control system is shown by simulation results.

• Journal of Navigation and Port Research
• /
• v.40 no.4
• /
• pp.173-181
• /
• 2016

From 2016, controls on reduction of NOx and SOx emissions from the vessels that are operated in the emission control area were tightened. The selectivity catalytic reduction system of the denitrification equipment which NOx among the above controlled materials is very effective and used commercially very much. But it has the disadvantage that CSR is activated at high temperatures. Therefore, the SCR and SCR activation instrument that can react even at low temperatures by using micro-nano bubbles so that the above problems can be minimized were developed. And the computational fluid dynamics technique was used by ANSYS-CFX package to prepare the plan that improves the SCR system's efficiency. Simulation for the viscous flow analysis of the SCR system was executed by applying the Navier-Stokes equation to it as a governing equation. For the SCR system's shape, 3D modeling was done by using CATIA V5. SCR jet nozzle's position was checked by changing it to the intervals of 1/3, 1/2, and 2/3 from the inlet of the vent pipe to compare the SCR system's efficiency. And the number of nozzles was compared and analyzed by simulating 4, 6, and 8 holes to check an effect of the number on the SCR system's efficiency. The simulation result has found that the closer nozzles are to the inlet of the vent pipe and the more nozzles are, the more efficiency is improved.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.468-472
• /
• 2015

Recently, there has been increasing interest in the efficient use of energy due to policies related to the reduction of greenhouse gas. This paper suggests a highly efficient sea water cooling system for the load-dependent control of a seawater pump depending on the load, to improve energy efficiency of the warship. This study models the propulsion diesel engine and simulation reflecting the characteristics of the warship operation state that checked the performance of high efficiency sea water cooling system. The simulation results revealed the cooling system of high efficiency with energy savings of approximately 53% compared to the existing cooling systems. These results can be used to improve the performance of the cooling system of the warship propulsion diesel engine in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.546-551
• /
• 2014

This paper proposes an opportunistic subchannel allocation (OSA) scheme for relay-based marine communication networks to improve a sum-rate capacity. In most previous works for relay-based networks, each RS delivers the data received from the BS immediately to the corresponding ships in each frame. The achievable data-rate of the two-hop transmission (BS-RS and RS-ship links) is thus limited by the channel quality between BS-RS and RS-ship links. Hence, the radio resources can be wasted according to the difference in the channel quality between the BS-RS link and the RS-ship link. The proposed OSA scheme reduces the waste of radio resources by efficiently and independently allocating the radio resources at the BS-RS link and at the RS-ship link according to the channel quality of each link. The proposed OSA scheme, however, increases the computational complexity, because the BS finds the optimal OFDMA resource by checking the channel quality of all BS-RS links and RS-ship links. The simulation results show that the sum-rate capacity of the proposed OSA scheme improves maximum 14.0% compared with the conventional scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1040-1049
• /
• 2010

The strengthened regulations for atmospheric emissions from ships have caused a necessity of new, alternative power system in ships for the low pollutant emissions and the high energy efficiency. Recently, new kinds of propulsion power system such as fuel cell system, which use hydrogen as an energy source, have been sincerely considered. The purpose of this work is to predict the performance of methanol fueled SOFC/GT hybrid power system and to analyze the influence of operating temperature of stack, current density of stack, pressure ratio of turbine, temperature effectiveness of recuperator, turbine inlet temperature.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.66-70
• /
• 2013

The input current of three phase rectifier which is mainly used in the propulsion system of the electric propulsion ship includes a variety of low order harmonics. To reduce these harmonics, the power conversion system, used in the large vessels which high power is required, is currently used the rectifiers of 12-pulse output, but it still has a problem that occurs $12{\pm}1$ harmonics. Also, in the case of the direct torque control technique which is widely used for the speed and torque control, the torque ripple is severe and the input current of motor has greatly included harmonics by the switching of the inverter. In order to reduce harmonics and improve the performance of torque control, this paper presents that the auxiliary supply assisted into the 12-pulse rectifier of the electric propulsion system using direct torque control technique. We confirm the validity of the proposed method through the simulation under the environment of a real vessel system.