• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.203-205
• /
• 2019

위성항법시스템의 안정적인 정보 제공의 요구사항은 점차 증가하고 있지만, 의도적인 전파교란 및 자연환경에 의하여 성능이 저하된다. eLoran 시스템은 위성항법시스템의 단점을 보완하기위한 대표적인 지상파항법시스템으로 고출력 신호로 의도적인 전파교란에 강인한 장점이 있다. eLoran 시스템에서 사용자는 E-field 또는 H-field 2가지 종류의 수신 안테나를 사용 환경에 따라 적합한 것을 사용한다. 접지가 필요없고 상대적으로 주변 전자장비의 잡음에 강인한 H-field안테나는 두 개의 루프로 구성되어 루프간의 위상과 이득차이로 일정한 원형의 지향성을 가지지 못한다. 그러므로 수신한 신호의 방향에 따라 측정치의 변화가 발생하므로 H-field 안테나를 사용시에는 수신하는 신호의 방향에 따른 오차를 제거해야한다. 본 논문에서는 H-field 안테나와 송신국간의 기하학적 방향오차에 따른 오차를 제거하기 위한 후처리 필터를 제안하였다. eLoran 모의 신호생성기를 활용하여 오차를 분석하고 모델링하여 제거하는 기법을 개발하였다. 제안한 기법을 검증하기 위하여 시뮬레이션과 차량실험을 통하여 오차를 확인하고 제거하여 성능향상을 확인하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.344-346
• /
• 2014

우리나라 항만 입출항 통항 선박의 대형화, 고속화에 따른 해양안전사고가 증가하고 있어 항만 연안 해역에서의 해상교통안전 확보가 절실히 요구되고 있는 실정으로, 최근 국제항로표지협회(IALA)에서 항로표지 설계와 배치계획에 대한 의사결정을 지원할 수 있는 항로표지 전문 기능 시뮬레이터의 개발과 주요 항로의 항로표지 설계 및 계획 등을 검증할 수 있는 시스템 필요성을 제기하였다. 우리나라 주요 항로의 항로표지 설계와 적정 배치 여부 등을 검증하고 보완할 수 있는 시뮬레이션 시스템에 대한 개발이 진행되고 있다. 항로표지 시뮬레이션 수행을 위하여 AtoN Manager 운영에 필요한 항로표지 속성 및 항로표지 3D 모델에 대한 항로표지 종류별, 속성별 세부사항을 검토하여 다양한 조합이 가능하도록 DB를 구축하였다. 또한, 항로표지 3D 모델링 작업데이터에 대하여 각 항로표지 시설물별 조합 경우의 수를 고려하여 시뮬레이션 구현 시 조합 가능한 항로표지 종류별 실시간 제어속성 항목을 검토하여 DB 분류작업을 수행하였으며 시뮬레이션을 위한 항로표지 3D 구현 방식을 검토하였다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.46-52
• /
• 2005

A marine environmental information system (MEIS) useful for optimal route planning of ships running in the ocean was developed. Utilizing the simulated marine environmental data produced by the European Center for Medium-Range Weather Forecasts based on global environmental data observed by satellites, the real-time forecast and long-term statistics of marine environments around planned and probable ship routes are provided. The MEIS consists of a land-based data acquisition and analysis system(MEIS-Center) and a onboard information display system(MEIS-Ship) for graphic description of marine information and optimal route planning of ships. Also, it uses of satellite communication system for data transfer. The marine environmental components of winds, waves, air pressures and storms are provided, in which winds are described by speed and direction and waves are expressed in terms of height, direction and period for both of wind waves and swells. The real-time information is characterized by 0.5° resolution, 10 day forecast in 6 hour interval and daily update. The statistic information of monthly average and maximum value expected for a return period is featured by 1.5° resolution and based on 15 year database. The MEIS-Ship include an editing tool for route simulation and the forecasting and statistic information on planned routes can be displayed in graph or table. The MEIS enables for navigators to design an optimal navigational route that minimizes probable risk and operational cost.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.647-655
• /
• 2021

The IMO (International Maritime Organization) is discussing the improvement of energy ef iciency of ships in order to reduce greenhouse gas emissions from ships. Currently, by applying an ORC power generation system using waste heat generated from ships, high energy conversion efficiency can be expected from ships. This technology uses an organic medium based on Freon or hydrocarbons as the working fluid, which evaporates at a lower temperature range than water. Through this, it is possible to generate steam (gas) and generate power at a low and low temperature relatively. In this study, the analysis of heat flow between the refrigerant and waste heat in the ORC power generation system, which is an organic Rankine cycle, is analyzed using 3D simulation techniques to determine the temperature change, velocity change, pressure change, and mass change of the fluid flowing of the WHRU (Waste Heat Recovery Unit) inside and the outside the structure. The purpose of this study is to analyze how the mass change affects the structure, and this study analyzed the heat transfer of the heat exchanger from the refrigerant and the exhaust gas of the ship's main engine in the ORC power generation system using this technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.760-768
• /
• 2009

In this paper, we propose the energy efficient transmission parameter selection method for Wireless Personal Area Network (WPAN) system which is applied to e-Navigation system considering various ship models environment. An appropriate selection of transmission parameters of HR-WPAN system is very essential to be considered for saving WPAN devices' energy consumption, when HR-WPAN system is applied to ship area network (SAN). Therefore, we propose an energy consumption model for a ship area network employing IEEE 802.15.3 based CSMA/CA HR-WPAN model and analyze the effect of transmission parameter selection on the performance of energy consumption. In particular, the path loss is the major performance decision parameter for the SAN employing HR-WPAN system, since it varies according to the material of shipbuilding such as steel(for large ship), FRP(for medium size ship) and compound wood(for small ship). Thus, we analyze and demonstrate that the proper transmission parameter selection of transmit power, PHY data rate and fragment size for each ship model could guarantee energy efficiency.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1023-1030
• /
• 2021

Korea Maritime Safety Tribunal (KMST) statistics released in of 2019 indicated that most collision accidents involving small-size vessels with less than 20 gross-tonnage occur mainly due to operational carelessness, such as forward-looking negligence and unskilled vessel control. As an effective remedy, training and education for vessel operators are being strengthened to prevent accidents. However, collision accidents are increasing, and technical measures are continuously developed to reduce accidents caused by human factors. In this study, an avoidance algorithm and prototype of terminal-controller against collision between two nearby vessels was developed for implementation on relative navigation control by adopting WAVE telecommunication technology. Moreover, several sea trial tests were performed to verify the collision avoidance algorithm and control system using two fishing vessels for dif erent scenarios.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.73-80
• /
• 2004

Recently, many maritime accidents have been increased and the collisions due to human error are given a great deal of proportions out if them We develop the Real-time Collision Risk Monitoring System (CRMS) for the navigational officers to cope with the emergency situation promptly and thus to reduce the probability if casualty. In this study, the risk of collision is evaluated by two kinds if method. The first method is based on Fuzzy algorithm, which evaluates the risk of collision between traffic ships. The second method is based on Environmental Stress (ES) Model, where the total risk if collision is evaluated by the environmental stress felt by human. The developed real-time CRMS has been installed to the ship handling simulator system and its capabilities have been tested through simulator experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.675-681
• /
• 2011

In this paper, we dealt with the design and fabrication of a medium pressure ultra-violet (UV) lamp and a magnetic ballast which are main components for ballast water treatment systems (BWTS). To acquire an optimal discharge condition of UV lamp, electrical and optical characteristics depending on the argon gas volume and the amount of mercury were experimentally analyzed. Rated voltage, current and power consumption of a prototype lamp were 490 [V], 8.6 [A] and 4.0 [kW], respectively. UV intensity of the lamp was 15 [%] higher than that of an equivalent lamp which is used in a BWTS. The magnetic ballast was designed in a UI core type through theoretical analysis and simulation. The open voltage and the rated power consumption of the ballast were 920 [V] and 8.5 [kVA] respectively. The disinfection efficacy which is carried out in a BWTS equipped with the UV lamp and magnetic ballast was over 99.99 [%], and this satisfy the IMO regulations.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.119-127
• /
• 2011

Overhaul and repair service means the sequential processes of disassembly, repair and reassembly for a product which has been used for a long time. Overhaul is required for the companies producing airplanes, ships, trains, military weapons and heavy industrial equipments which are very expensive and have a long life cycle. The most important performance measure of the overhaul repair shop is usually the lead time. Thus, how to design the manufacturing system to meet the delivery date is a major concern in overhaul repair shop. This paper introduces the case study of an overhaul repair shop producing military weapon systems with the 3D simulation tool, $QUEST^{TM}$. At first, the characteristics of overhaul shop and what should be considered for simulation modeling are explained. Then, various simulation scenarios including two types of disassembly systems, one is flow line system and the other is cell system, are discussed with the results of simulation experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.740-749
• /
• 2011

The strengthened regulations for atmospheric emissions from ships have caused a necessity of new, alternative power system in ships for the low pollutant emissions and the high energy efficiency. Recently, new kinds of propulsion power system such as fuel cell system, which use hydrogen as an energy source, have been sincerely considered. The purpose of this work is to predict the performance of gasoline fueled SOFC system and to analyze the influence of operating temperature, current density, S/C, and H2 utilization ratio. The results are compared with the methane fueled system. The results show that the cell voltage and $O_2$ utilization ratio are major factors on the performance of system and the gasoline fueled SOFC system have lower efficiency than the methane fueled system.