• Journal of Ocean Engineering and Technology
• /
• v.10 no.2
• /
• pp.28-34
• /
• 1996

해저면에 설치되 있는 기름 송유관에 손상이 생겨, 송유관 내부에 흐르는 기름이 유출 될경우 엄청난 환경오염 및 재난을 발생시킨다. 해저 송유관 손상에 의한 기름유출 원인은 여러가지 경우에 기인한다. 선박의 바닥이 해저면에 끌려 해저 송유관을 손상시키는 경우, 선박의 엥커에 의해 손상되는 경우, 지진에 의해 좌굴되는 경우, 자유 경간 (Free span)에 의해 좌굴 되는 경우, 송유관 수리 시 사고로 인한 유출, 송유관의 부식에 기인한 유출 등으로 나누어 질 수 있다. 어떠한 경우이든 해저 파이프 손상시, 유출된 기름의 양을 예측하고 그에 따른 적절한 대비가 필요하다. 본 논문에서는 1차 유출 및 2차 유출을 정의하여 각각의 경우에 유출량 해석 이론을 소개하였다. 또한 이 이론을 실제 경우에 응용하여 해저 송유관 손상에 의해 방출되는 기름량을 손상면적에 따라 계산하였고, 최대 유출량 산출 법을 적용하여 손상 위치에 따른 부분별 유출량 계산법을 소개하였다.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.586-593
• /
• 1989

국내 선박용 원동기연구는 1980년대에 들어서면서부터 엔진의 성능시험평가, 요소 기술개발연구, 소형엔진의 성능개량연구 등이 연구인력확보, 연구시설 확충 및 연구기반 구축과 병행하여 진행 되고 있다. 중. 대형엔진공장을 유치하여 생산공급하기도 급급했던 초기단계에서 수요확보를 위한 노력이 절실히 요망되었고, 또 부품 국산화, 수요자 요구에 부응키 위한 자체 능력향상은 가공생 산기술축적, 설계능력향상, 수리전문 기술자 및 AS등으로 도모되어 왔다. 외국 기술도입에 의한 생산의 장점-기술도입자체 외에도 세계적인 서비스 네트워크, 상표사용, 새로운 기술의 확보 등은 한국형 엔진 개발을 위한 연구를 도외시해 왔다. 한편 소형엔진에서는 어선 근대화 사업, 어민들 의 엔진성능인식이 상향됨으로써 새로운 고성능 엔진개발이 1980년대에 활발하게 진행되어 상당 한 진전을 보여 왔으며 고속엔진개발이나 대체에너지 이용 엔진개발에도 연구가 확대되고 있다. 본 글에서는 국내 박용 원동기 연구개발동향을 소개하기 위하여 국내 박용디젤엔진 산업과 연구 배경, 개발연구 등에 대한 내용을 실적 및 진행중인 과제를 위주로 요약 소개하고자 한다.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.15-20
• /
• 2006

In this study, we had investigated several input factors and output factors, to maintain safety management, of domestic shipping companies, and then had analyzed the efficiency of performance of performance about each shipping companies' safety management system from 1998 year to 2004 year using DEA method As the result of analysis, the annual mean efficiency of total companies tended downward every year. Analysis was that the cause was increase of the cost of repairing ship, the cost of ship's stores and idle day of ship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.339-344
• /
• 2006

The productivity for container hand1ing in container ship is a important role in container terminal, and it is mainly depended on the productivity of gantry crane. From the failure of gantry crane, the crane will be stopped until the repair of the failure. During the repair, the loading and/or discharging for container ship is suspended, and the productivities of the container ship and the yard is just hold. Thus, the prevention maintenance is importance to make a keep the steady state condition for all equipments in container terminal. In this paper, we deal with a optimal determination method of prevention maintenance interval for gantry crane systems. For verification, we will make a productivity of gantry crane and adapt to total container handling in each ship by simulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1036-1043
• /
• 2022

This paper discusses about the development of a visual sensor that can be installed in an automatic mooring device to detect the berthing condition of a vessel. Despite controlling the ship's speed and confirming its location to prevent accidents while berthing a vessel, ship collision occurs at the pier every year, causing great economic and environmental damage. Therefore, it is important to develop a visual system that can quickly obtain the information on the speed and location of the vessel to ensure safety of the berthing vessel. In this study, a visual sensor was developed to observe a ship through an image while berthing, and to properly check the ship's status according to the surrounding environment. To obtain the adequacy of the visual sensor to be developed, the sensor characteristics were analyzed in terms of information provided from the existing sensors, that is, detection range, real-timeness, accuracy, and precision. Based on these analysis data, we developed a 3D visual module that can acquire information on objects in real time by conducting conceptual designs of LiDAR (Light Detection And Ranging) type 3D visual system, driving mechanism, and position and force controller for motion tilting system. Finally, performance evaluation of the control system and scan speed test were executed, and the effectiveness of the developed system was confirmed through experiments.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.245-245
• /
• 2017

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.10-12
• /
• 2012

현재 표준등부표의 종류는 10가지이며, 가장 작은 등부표가 4.4m로 대형인 것이 현실이다. 본 연구에서는 제작, 설치비용이 적고, 교체와 수리가 용이한 소형 등부표를 검토하였다. 상대적으로 소형인만큼 외력으로 인한 유실, 위치 이동 등의 사고에 대비하기 위한 안정성 검토가 필요하다. 이 논문을 통해서 새로운 등부표의 운동성(Heave, pitch)을 Encounter Frequency별, Beaufort scale별로 구분하여 비교, 분석하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.927-935
• /
• 2019

Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.

• The Journal of Fisheries Business Administration
• /
• v.43 no.2
• /
• pp.51-66
• /
• 2012

The purpose of this study is to present a new business performance model suitable for marin repair business. For this propose we have used survey datas gathered on several input and output factors from Marine engin repair companies Yeong-Do Gu. Gathering these the survey results we estimated the efficiency of each company through DEA method. The results of the analysis can be summarized as follows ; First, the result of the analysis showed 7 out of 24 DMU are not efficient companies. On the other hand 17 of them are efficient as the efficient output analyzes showed. Second, by analysing the results we could see significant differences between group companies, Ltd with a private companies with share on average efficiency in utilization. Third, two of the private companies are more effective and 6others were selected revisit and interview on the analysis. As a result inefficient DMU compared to efficient DMU and showed that they invest more on manpower in the field of sales and professional managers and techicians. Also, lots of effort devoted in order to standardize production by building capacity and environment management to improve welfare of the workers.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.78-83
• /
• 2008

In recent years, small boats used for marine leisure have been steadily increasing because of the increase in national income and the desire for marine leisure. But the repair of such small boats in dry dock has pointed out many faults in small FRP-shipbuilding in terms if workspace and manpower. Lifting a boat from the water to land is done with a crane or by hand using a sling around the bottom of the boat. But dry dock work is limited by the scale of the boat, which corresponds to the crane capacity, with carelessness making it possible to capsize a boat and endanger life. The purpose of this study was the development of a marine docking system that would improve economical efficiency and safety, for which we carried out concept design, model tests, structural analysis, etc.