• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.84-89
• /
• 2008

It is hard to find experimental data for a model test of small high-speed planning boats. It is difficult to verify the performance seen in a model test for a high-speed boat because the ship-model scale-ratio is very small and the flow velocity of the circulating water channel and the X-carriage speed of the towing tank are restricted. Therefore most hull-form designs for high-speed small boats depend on the sea-trial test result for similar boats or evaluation through numerical calculations. This study investigated the anti-rolling effect of the stern sub-body in a 50-knot doss planning boat. To carry out this work, new model test procedures were set up in the actual sea. Using this method, the anti-rolling effect of the stern sub-body was investigated. A stern sub-body attached to a planning boat was proved to be effective in reducing the roll and pitch angle.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.667-671
• /
• 2005

This study was carried out to examine the prediction of ship's manoeuvrability in initial design stage. New parameter representing basic hull form and stem shape were proposed. Captive model test were carried out to investigate the correlation coefficient between hydrodynamic coefficient and hull parameter. The results showed which parameter are positive correlation with hydrodynamic coefficient. Moreover correlation was examined between stem hull shape and ship's manoeuvrability. New empirical formulas for hydrodynamic coefficients were proposed These results can be used to predict a ship's manoeuvrability in initial design stage.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.753-757
• /
• 2004

The free-surface flow is simulated to make clear the viscous interaction of stem waves and the sub-breaking phenomena around a high speed vehicle. The Navier-Stokes equation is solved by a finite difference method where the body-fitted coordinate system, the wall function and the triple-grid system are invoked They are applied to study precisely on the stem flow of S-103 as to which extensive experimental data are available. Computations are extended to the submerged revolutional body. The numerical result shows that the gradient of M/Us is greatly influenced by the submerged depth And the stem wave is influenced by the separation due to the bow wave.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.40-42
• /
• 2011

예선이 부선을 선미 예인하는 상황에서의 예부선 조종특성을 확인하기 위하여, 예부선 통합 자유항주 모형시험을 수행하였다. 기존의 실선시운전에서는 관측하지 못한 부선의 불안정한 거동을 확인하였으며, 브라이들을 이용한 2점 예인 상태로, 우현 10도, 20도, 30도 선회시험을 수행하여 예선과 부선의 선회반경을 측정하였다. 시험수행조건이 다르나, 실선시운전 결과와 비교하여 선회반경이 약 3배 이상 커진 것을 확인할 수 있었다. 또한 부선의 선회궤적이 예선의 선회궤적 안쪽에 존재하는 것도 재확인할 수 있었다.

• Journal of Technology Innovation
• /
• v.24 no.3
• /
• pp.139-159
• /
• 2016

The purpose of this study is to find out the factors which promoting career development of scientist and engineer laborforce. We made up three logit analysis models to figure out the factors affecting the career of scientist and engineer laborforce. Dependent variables were composed of job attributes in 2011, current job attribute, changing of working conditions, efforts of job seeking, university education, and personal characters. Three analysis model were composed of demand side model which including job attributes factors, supply side model which focus on employment or university education characters and total model including the demand and the supply factors. The results showed a stable career to the development of scientist and engineer laborforce's job attributes on the demand side than the supply side, such as a college education even more important. After all, the initial stable jobs and good matching policy were the most important policies to be seated in the science and engineering professions.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.1-11
• /
• 1991

A hull form for an Aframax tanker whore form parameters cover the values of $C_B{\simeq}0.8,\;L/B{\simeq}5.5\;and\;B/d{\simeq}3.5$ has been developed by applying a composite stern frameline concept and its excellent performance has been evaluated through a series of model tests at the Korea Research Institute of Ships and Ocean Engineering. The tests showed that this concept was very much promising in the cases of wide breadth and shallow draught vessels and suitably applicable to the stern frameline shape. For the comparison, a hull form developed by Japanese 'H' yard has been selected and the performances of two hull forms were evaluated by model tests and theoretical calculations. The comparison shows that Daewoo hull form requires less effective power by 10% and less delevered power by 5-6% at both full load and ballast conditions. In addition, it is suggested that Hushes method can give better correlationthan Froude method because the full scale resistance extrapolated by Froude method would be very much optimistic in case of the hull form with very low value of form factor.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.75-81
• /
• 1989

In this paper, the authors describe on the field experiment of the newly designed actual stow net, standing on the result of the model experiment to examine the performance of the conventional net and the newly designed net, presented in two previous reports of this series. Concurrently the additional experiment to find out the possibility of changing of operating system from the side to the stern was carried out. 1. Fundamental shape of the experimented net was 20 times aslarge asthe newly designed model net. Performance of the net was detected by using two ultrasonic echo sounders: one was set downward at the top-most spreader of the shearing device to detect the opening height of the device from the sea bed, and the other sidewise at the starboard top-most spreader to detect the top-most opening width of the devices. Opening height of the newly designed net showed about 3m smaller than the conventional net at slow current of 0.6m/sec and less but it overcome 1m at speedy current of 0.8m/sec and more. Opening width of the newly designed net was 1.4 times as large as that of the conventional net, ant the front projection area of the newly designed net mouth was estimated as 1.3~1.6 times as large as that of the conventional net. 2. The experiment on the stern operating system was tightly limited by the structure of the ship employed in the experiment, which was a stern trawler of 2275 GT. The ship confronted by the wind with main anchor, while the net was put over the stern slipway and the hauling line of shearing device was operated through the top rollers of gallows. The experiment was very suggestive in the view point to mechanize the operating system, and so to decrease the man power except the following question. The of bow-stern line of ship, and that of net is much different.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.585-591
• /
• 2014

The primary objective of the current work is to predict speed performance of the medium patrol boat over $F_N=0.5$ employing experimental materials based on the CFD before model tests. In other words, the predicted brake powers according to ship speeds are assessed satisfying the main engine capacity. The subject ships are selected the two different stern hull forms. The flow computation are conducted considering free surface and dynamic trim using a commercial CFD code(STAR-CCM+). The resistances of the bare-hull are obtained from CFD. Wave patterns, pressures and limiting streamlines on the hull and velocity distribution in the propeller plane for the two hull forms are compared using CFD. The effective powers of the object ships are assessed based on CFD. Resistance increase according to the attached appendages and quasi-propulsive efficiency are employed the experimental datas. Speed performance prediction method concerning high speed vessels like a medium patrol boat is developed employing CFD and experimental data.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.6
• /
• pp.941-949
• /
• 2013

Objectives : The objective of this study is to investigate the influencing factors of turnover intention in dental hygienists and to find the management of manpower by path analysis. Methods : The influencing factors included working environment, external factors, and job satisfaction. Data were analyzed by SPSS 18.0 and AMOS 20.0. Results : Older and married persons were satisfied with their jobs. Turnover intention was higher in the single and more experienced persons. Job satisfaction and working environment factors were closely related with each other. Conclusions : Job satisfaction and working environment factors were closely related with each other. In order to reduce turnover intention, it is very important to enhance the work performance and self-esteem toward job in the dental hygienists.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.55-63
• /
• 2016

Nowadays, large container ships are continually developed and that's why the bow and stern structural stability problems by slamming become a significant more and more. However, due to the complexity of slamming, it is difficult to consider those problems at the design stage. For this reason, we attempt numerical analysis through SNUFOAM by generating the bow and stern two-dimensional cross-sectional grid in WILS JIP experiment at KRISO. Unlike the conventional method for the computation time saving, by setting the inlet flow conditions referred to the model test, we analyzed the slamming without applying the grid deformation method. As a result, when the stern model, as in the previous studies, it was possible to obtain quantitatively the fluid impulse is close to the experimental results. When the bow model, we can found the change by the position of force sensors which are derived for the bulbous bow and obtained fluid impulse and flow shape at slamming similar to the model test.