• Journal of the Korean GEO-environmental Society
• /
• v.11 no.2
• /
• pp.43-52
• /
• 2010

Shield method is the tunnel boring method that propels a steel cylinder in the ground and excavates tunnels at once. After Marc Isambard Brunel started using the method for the Thames Riverbed Tunnel excavation in London, many kinds of TBM (Tunnel Boring Machine) developed and applied for the construction of road, railway, electricity channel, pipeline, etc. In comparison with NATM concept that allows to observe ground condition and copes with difficulty. The machine selected before starting construction is not able to be changed during construction in shield TBM. Therefore the machine should be designed based on the ground survey result and experiment, so that the tunnel might be excavated effectively by controlling penetration speed, excavation depth and cutter head speed according to the ground condition change. This research was conducted to estimate penetration depth, excavate speed, wear of disc cutter on Boondang Railway of the Han Riverbed Tunnel ground condition by TBM performance prediction models such as NTNU, $Q_{TBM}$, Total Hardness, KICT-SNU and compare the estimated value with the field data. The estimation method is also used to analyze the reason of poor excavation efficiency at south bound tunnel.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.164.2-164.2
• /
• 2010

KEPCO에서는 발전소로부터 생산되는 전력을 각 가정에 공급하기 위하여 전력선을 설치하고 있다. 이 전력선은 지상과 지중에 동시에 설치되고 있으며, 지상에 위치한 전력선을 가공선이라 한다. 지중에 설치된 전력선을 지중선이라 하며, 지중선을 설치하기 위한 공사를 지중화공사라 한다. 전력선은 전력이 통전될 때 일정한 온도 이상의 열이 발생하게 되며 이 열이 신속하게 외부로 빠져나가야지만 전력수송효율이 떨어지지 않게 된다. 지중화공사는 대부분 도로를 재굴착하여 설치하게 되며, 전력선을 설치한 후 주변 되메움재로는 모래를 이용하고 있다.하지만 최근 들어 모래의 수급이 딸리고, 가격이 높아지고 있는 관계로 이의 대체재료가 필요한 실정이다. 이에 본 연구에서는 전력선 되메움재인 모래의 대체재료로 건설폐기물의 일종이었던 순환골재를 이용하기 위하여 열저항특성을 분석하였다. 이미 순환골재는 2005년부터 공공 공사에 의무적으로 사용하도록 규정이 되어 있어 도로 또는 콘크리트 골재로 사용하고 있다. 순환골재를 전력선 되메움재로 사용하기 위해서는 열저항온도(thermal resistivity)가 $120^{\circ}C$-cm/W 이하가 되어야만 전력선 효율이 떨어지지 않기 때문에 이를 만족하는 것이 매우 중요하다. 이를 위해 QTM-500 장비를 이용하여 순환골재의 열저항 특성실험을 시행하였다. 실험의 원활한 수행을 위하여 순환골재의 입도는 5.0mm 이하로 제한하였으며, 인자로는 다짐도와 함수비를 중요한 인자로 선택하였다. 분석결과, 다짐도 및 함수비는 순환골재의 열저항온도에 영향을 미치는 주인자로 나타났으며, 일부 교호작용도 존재하는 것으로 나타났다. 향후 실험결과를 바탕으로 현장 실증실험을 수행할 예정이며, 본 연구결과는 KEPCO의 순환골재 이용기준수립에 활용할 예정이다.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.219-224
• /
• 2020

The purpose of this study is to develop a device to replace the pre-boring method, which is generally constructed, to prevent pile damage caused by tension cracks that reason from tension waves generated during PHC pile construction on soft ground. Tension cracks are caused by tension waves from the hammer striking during the PHC pile hitting on the soft ground, which in turn leads to faulty construction. In order to prevent the occurrence of tension waves generated during driving, apply separate driving force increasing device to prevent the generation of tension waves, and pile damage as well. Also, it is an eco-friendly construction method that reduces smoke and noise by improving construction speed, reducing construction costs, and able to small equipment when developing equipment. This development equipment is a piece of effective equipment that can pioneer the Saemangeum reclamation area, the South-east Asian construction market, where the Deep soft ground is distributed.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.189-199
• /
• 2002

영동선 이설사업 일환으로 영동선 동백산역(강원도 태백시 연화동)과 도계역(삼척시 도계읍)간의 본 터널은 총 연장 16.4km인 장대터널로서 전북 완주 전라선 슬치터널(6.12km)보다 10km 이상 길고, 정선 고한과 태백 추전을 잇는 4.5km의 정암터널의 3배가 넘는다. 특히 이 터널은 구간의 높이 차(약 3백80m)를 극복하기 위해 Loop형태로 설계되었고, 열차의 안정성, 구난대피, 환기측면에서 단선병렬 터널로 설계되었다. 또한 불량한 선형과 노후된 터널구조물로 인한 열차 안전운행 저해요인을 해소하기 위해 천공발파공법을 굴착공법으로 채택하였다. (중략)

• Tunnel and Underground Space
• /
• v.14 no.6 s.53
• /
• pp.440-449
• /
• 2004

Rock mass includes natural discontinuities such as joints and faults during its formation. Discontinuities are also referred as planes of weakness because of their weak mechanical characteristics. In the design of underground structures, it is necessary to consider the properties of discontinuities to insure the stability. During the excavation of a tunnel, these discontinuities have to be identified as early as possible so that proper change in excavation method or support design can be made accordingly. The excavation of the tunnel in a stable rock mass causes a 3-dimensional arching effect around the excavation face. It was revealed by previous studies that the existence of a weak zone or a fault zone ahead of tunnel foe induces a typical displacement tendency of convergence. For better understanding of the meaning of influence/trend lines of various displacement components, three-dimensional numerical analyses were conducted while varying deformation moduli, thicknesses and orientations of discontinuities. Numerical results showed that the changes in influence/trend lines of various displacement components were very similar to those by measurements. The discrepancies from the expected values were dependent on the physical properties, thicknesses and orientations of discontinuities.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.13 no.2
• /
• pp.41-49
• /
• 2011

양북터널은 굴착과 동시에 라이닝콘크리트를 타설하였다. 터널굴착과 라이닝콘크리트의 동시시공을 위한 적정시공 Cycle을 결정하고, 이에 따른 양생기간과 양생온도를 설정하는 순으로 시험하였다. 라이닝콘크리트는 품질관리를 위해 보온장치를 탑재한 Sliding form과 양생대차를 운영하고, 균열을 최소화하기 위해 양생온도와 양생시간 및 탈형강도 등을 시험에 의해 결정하였다. 시험과정은 터널내부와 라이닝콘크리트 내부온도를 계절별로 측정하고, 양생온도별로 콘크리트의 강도를 측정하였다. 거푸집 탈형시 콘크리트 온도가 터널내부의 온도로 수렴하기까지는 $15{\sim}20^{\circ}C$의 차이로 측정되었고, 거푸집 탈형을 위한 콘크리트 초기강도 4MPa을 발현하는데는 양생온도에 따라 차이가 발생하지만 시공 Cycle에 적합한 양생시간은 약 20시간이고, 이 때의 양생온도는 $23^{\circ}C$ 이상이었다. 위의 시험결과대로 현장에서 라이닝콘크리트를 양생한 결과 시공 Cycle과 압축강도 및 콘크리트면의 외관 등이 만족한 결과를 나타내었다.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.5
• /
• pp.17-26
• /
• 2017

Tunnel excavation in jointed rock mass induces a displacement along tunnel excavation line and its assessment is very important to ensure the stability of tunnel and a demanded space. Tunnel displacement is directly related to the deformation modulus of ground and therefore it is essential to know the value of the parameter. However, most rock masses where tunnels are constructed are generally jointed and it is difficult to find out the deformation modulus of jointed rock mass simply based on an homogeneous isotropic elastic medium because the deformation modulus is highly affected by joint condition as well as rock type. Accordingly, this study carried out extensive numerical parametric studies to examine the variation of deformation modulus in different joint conditions and rock types under the condition of tunnel excavation. The study results were compared with existing empirical relationships and also shown in the chart of deformation modulus variation in different jointed rock mass conditions.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.545-553
• /
• 2008

Face mapping and displacement monitoring during tunnel construction are the most influential information for the stability assessment of ground and around structures. Especially, the result of face mapping and displacement analysis is essential to the excavation and support design in NATM which is based on the drilling and blasting. However, there have not been so many studies to put those useful information into practice for decision-making process during construction. The study reviewed the tunnel behaviour based on the RMR rating and displacement monitoring when the geological condition of rock mass varies inevitably. The study analysed the crown settlement using convergence equation in order to compensate the disparity induced by the location and time of measurement and found a distinct relation between the geological condition and the line of influence. As a result of analysing the various parameters related to the tunnel convergence according to the geological condition, the study suggested the basic knowledge about the relation between face mapping and displacement behaviour of tunnel.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.67-74
• /
• 2022

The setting of the target area for ground stability evaluation during ground excavation is categorized into theoretical and empirical estimation methods and numerical analysis methods. Generally, the applied theoretical and empirical estimation methods include those by Peck (1969), Caspe (1966), and Clough et al. (1990). The numerical analysis method comprehensively considered the current status of the task section (maximum excavation depth section, ground condition vulnerable section, etc.). It reflected the results of performing two and three-dimensional numerical analyses on the weakest section. Therefore, this study shows an example of setting the scope of influence when excavating the vertical and tunnel sections of a 000-line double-track private investment project through the above theoretical, empirical, and numerical analysis methods.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.15-24
• /
• 2010

In the case of underground power utilities pipe such as circular pipe, the most difficult problem is low compaction efficiency of the bottom of pipe inducing the failure of utilities. To overcome this problem, various studies have been performed and one of these is CLSM(Controlled Low Strength Materials) accelerated flow ability. But underground power utilities pipe backfill materials is also needed to have good thermal property that can dissipate the heat as rapidly as it is generated. So, in this study, we performed thermal resistancy test for various materials such as sand, weathered soil, clay and mixed soil to analyze the thermal characteristics of CLSM(Controlled Low Strength Materials) with accelerated flow ability for various conditions(water content, unit weight, void ratio, curing time) and to evaluate the applicability for backfill material of underground power utilities pipe. The test results of 16 specimens for thermal resistancy test showed good thermal property that maintained below $85^{\circ}C\;cm/W$.