• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.695-701
• /
• 2020

This study aimed to monitor a pilot-scale vertical flow reactor (VFR) system being operated in long-term for water quality control of pH-neutral mine drainage containing Fe, Mn and As, discharged in D mine site. The treatment systems of VFR and zero manganese reactor (ZMR) consisted of sand/limestone, and steel slag/limestone, respectively. The systems were operated during about six months in order to evaluate their long-term treatment efficiency It was observed that both pH and alkalinity of mine drainage were remarkably increased and more than 98% of Fe, As and Mn ions was continuously removed during the tested period of time. In conclusion, the field results of this work demonstrated that the vertical flow reactor system can effectively treat mine drainage contaminated by Fe, As and Mn.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.1-11
• /
• 2016

This study deals with the case that was the field application of the microseismic monitoring techniques for the stability monitoring in a domestic mine. The usefulness and limitations of the microseismic techniques were examined through analyzing the microseismic monitored data. The target limestone mine adopted a hybrid room-and-pillar mining method to improve the extraction ratio. The accelerometers were installed in each vertical pillar within the test bed which has the horizontal cross-section $50m{\times}50m$. The measured signals were divided into 4 types; blasting induced signal, drilling induced signal, damage induced signal, and electric noise. The stability analysis was performed based on the measured damage induced signals. After the blasting in the mining section close to the test bed, the damage of the pillar was increased and rockfall near the test bed could be estimated from monitored microseismic data. It was possible to assess the pillar stability from the changes of daily monitored data and the proposed safety criteria from the accumulated monitored data. However, there was a difficulty to determine the 3D microseismic source positions due to the 2D local sensor arrays. Also, it was needed to use real-time monitoring methods in domestic mines. By complementing the problems encountered in the mine application and comparing microseismic monitored data with mining operations, the microseismic monitoring technique can be used as a better safety method.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.11a
• /
• pp.213-234
• /
• 2002

우리 나라는 70년대까지 광업은 부흥하였으나, 그 이후 급속히 위축되면서 80년대 이후 거의 대부분 광산들이 폐광 또는 휴광된 실정이다. 그 결과 현재 전국 각지에 다수의 폐갱도가 존재하게 되었으며, 이제는 지반침하 및 각종 침출수의 원인자로 간주될 정도이다. 최근 지자체에서는 이런 폐갱도를 지역 자원으로서 가치를 인정하고 지역 활성화를 위해 재 이용하려는 움직임이 보이고 있는데, 구체적으로는 관광시설, 연구시설, 농업생산시설, 저장시설, 폐기물처리시설 등이다. 일본은 폐광된 금속광산 재활용을 위해 입지여건과 주변지역, 입갱 가능성 등 기초조사를 하였다. 조사결과 폐갱도의 문제점으로 입갱이 가능한 광산이 적다는 점을 들 수 있다. 대부분의 광산은 갱구가 함몰되었거나, 갱내에 지하수가 차 있어 접근이 불가능한 경우가 대부분이다. 비교적 양호한 암반 경우는 서브 레벨 스토핑, 잔주, 주방식 등의 채굴법에 의해 대규모 공동이 잔존하고 있는 경우도 있지만 그리 많지 않았다. 폐광된 광산 재활용 여건은 우리 나라와 일본이 대동소이 경우로 현실적으로 활용이 가능한 폐광은 많지 않으며 활용코자 할 때에는 기존갱도를 활용하면서 암반이 견고한 곳에 새로운 갱도를 설치하여야 한다. 그러나 몇몇 곳에서는 매우 유용하게 잘 활용되고 있는 곳도 있고, 연구 검토하면 충분한 활용성이 있다고 생각되는 곳도 있다. 그러므로 현재의 상황을 보고 판단할 것이 아니라, 활용기술과 접목해서 활용성을 검토함으로써 불용 자산의 유용화 방안이 검토되어야 할 것이다. 현재 가행중인 광산은 입지여건 및 암반이 양호하고, 대형갱도를 굴착하는 석회석광산 등을 선택하여 폐광 후 활용이 가능토록 채광기술 발전시켜 나가야 하며, 인간 중심적인 시설 또는 산물 중심적인 시설로 구분하여 폐광 후 복구비용을 우선 지원하는 방식 등을 통하여 시추, 탐광굴진, 현대화, 수갱굴착, 자금융자 등을 지원하는 우리 공사와 산업자원부가 지자체, 산림청, 건교부, 농림부 등과 연계하여 종합적인 지원육성책을 마련하여야 할 것이다. 결과적으로, 지방자치단체 등에서 관심을 갖고 있는 저장시설, 폐기물처리시설, 관광시설, 농업생산시설, 연구시설 등을 중심으로 ＆apos;광산 채굴적을 미래에 어떻게 활용한 것인가＆apos;를 선진외국 사례를 벤치마킹하고, 연구ㆍ검토하여 친환경적인 광산개발이 되도록 기본적인 방향과 개념을 갖도록 하여 관련 정책을 계획적이고, 체계적으로 수립 일관성 있게 추진해 나가야 할 것이다.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.335-347
• /
• 2016

The mineralogical and geochemical characteristics of diverse carbonate rocks can be investigated by using VNIRSWIR(visible near infrared-short wavelength infrared) spectroscopic analysis as a rapid, nondestructive, and inexpensive tool. Comparing whole rock analysis to VNIR-SWIR spectroscopic analysis, the analytical method was investigated to estimate CaO contents, mud impurity, and whiteness of carbonate rocks involved in high-grade limestones in the field. We classify typical carbonate rocks in the upper Pungchon Formation in high-grade limestone mine area such as the Gangweon, Chungmu and Baegun mine in the Jeongseon area. The results show that powdered specimen has much higher reflectance than cutted specimen between the same sample. Whiteness is highly correlated with reflectance(0.99) for powdered specimen. The absorption of mineral mixtures shifts in position as a result of the mass ratio of calcite and dolomite in the Chungmu mine by changing to 75:25, 50:50, and 25:75. The absorption peak position in carbonate mixtures is highly correlated with CaO contents(0.98~0.99). Based on color system, the carbonate rocks are grouped into (milky) white, light grey, light brown, grey, and dark grey. The absorption peak position shifts from 2340 nm to 2320 nm as CaO contents decrease from 55.86 wt.% to 29.71 wt.%. We confirmed that absorption peak position shifts depending on the amount of Ca, which is bonded to $CO{_3}^{-2}$, Mg, and Fe contents replacing Ca. This result suggests that CaO contents in carbonate rocks can be considered to quantitative analysis in the field by spectroscopic analysis.

• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.163-172
• /
• 2012

As more diesel engines have been employed in underground limestone mines with large cross section, underground space environment is worsened by diesel exhausts and heat flow. This paper aims for the ultimate goal to optimize the work place environment through assuring the optimal required ventilation rate based on the analysis of the airflow, diesel exhaust gas concentrations and the effects of mechanization and deepening working face on temperature and humidity. Due to the insufficient capacity of the main exhaust fan and poor airway management, stagnant airflows were observed at various locations, while the flow direction was reversed instantly with passing diesel equipment and the flow reversal was also made by the seasonal variation of the outside surface weather. During the loading operation, CO concentration measurements were found to be frequently higher than the threshold limit of 50 ppm, and most of the $NO_2$ measurements during drilling and loading operations shows even more serious levels surpassing the permissible limit of 3 ppm. The actual ventilation quantity was considerably less than the required quantity estimated by the mine health and safety law, and this shortage problem was less serious in colder winter showing more effectiveness of the natural ventilation.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.463-473
• /
• 2000

This research was carried out to investigate chemical pretreatment using limestone in treating abandoned metallic mine drainage with anaerobic biological treatment, and to estimate application of papermill and livestock sludge as carbon sources for SRB (Sulfate Reducing Bacterial. Capacity of anaerobic limestone bed was steeply decreased. But if limestone was utilized as pretreatment process in treating them with anaerobic biological treatment. it could look forward to stabilize system because it did initally neutralize them. Effluent SCOD in R-4 was lower than R-l~R-3 in inital HRT 5day but its concentration was high in HRT 1day after passed time. Therefore in point of durability and supply of organic matter. it seemed that R-4 was useful became organic matter in R-4 was not consumed by excessive degradation within short period. In all reactors, pH was suitable for SRB growth in whole HRT, but on the evidence of ORP, SRB was active after HRT 2day. Fixation trend of heavy meta s showed high as $SO_4{^{2-}}$ reduction efficiency increased, and $SO_4{^{2-}}$ reduction and fixation of heavy metals were relatively high in HET 2day.

• Tunnel and Underground Space
• /
• v.23 no.2
• /
• pp.99-109
• /
• 2013

The slopes of open-pit mine are typically designed without considering the reinforcement and support method due to the economical efficiency. However, the long-term stability of final pit slope is needed in some case, therefore the appropriate measures that can improve the stability are required. In this study, the field survey and laboratory test were carried out in S limestone mine. The stability assessment of final pit slope was performed through the stereographic projection method, SMR, and numerical analysis. And countermeasures for stabilization were proposed. The results of analysis show that full scale of slope failure is not expected but the failures of bench slope scale are likely to occur. In oder to increase the stability of bench slope, we suggested the remedial methods as follows: excavating the final pit slope by pre-splitting blasting, placing the wide berm in the intermediate bench slope and installing the horizontal drainage hole in the place of local ground water runoff.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.10a
• /
• pp.61-64
• /
• 1999

산성침출수에 의한 광산폐기물 매립지 근처의 지하 환경의 오염 및 대처 방안의 효과를 수치적으로 예측하였다. 이를 위하여 지하토양에서 Darcy 법칙을 사용한 침출수의 흐름과 이산-분산에 의한 오염물질의 이동현상을 예측하기 위하여 Galerkin 유한요소법을 활용하였다. 토양오염의 지연을 위하여 석회석 차수막을 연직형과 수평형을 도입하여 그 효과를 조사하였다. 수평차수막에서의 수착이 오염물질의 이동을 지연시키는데 상당한 효과가 있는 것으로 나타났다. 반면에 연직차수막은 지하수의 우회유동으로 인한 오염물질의 확산이 가중되고 있는 것으로 예측되었다. 전반적으로 침출수의 흐름은 광산매립지 제방 근처에서 강하게 일어나는 것으로 나타났다. 이를 근거로 차수막의 효과적인 설치방안이 고안되어야 할 것으로 보인다.

• Mineral and Industry
• /
• v.19 no.1
• /
• pp.87-94
• /
• 2006

• Proceedings of the KSEE Conference
• /
• 2007.10a
• /
• pp.1-13
• /
• 2007