• Journal of the Korean Society for Library and Information Science
• /
• v.33 no.4
• /
• pp.133-156
• /
• 1999

The purpose of this paper is to show how conceptual data modeling can enhance current information retrieval (IR) systems. The conceptual database design provides for: 1) data mining capability to discover new knowledge based on the relationships between entities, and 2) integrating current separate databases into one IR system (e.g., integrating ISI Citation, a thesaurus, and bibliographic databases into one retrieval system) . Further, as new user requirements are unfolded, modifications of IR systems based on conceptual data modeling will be much easier to make than they were in the current IR systems because conceptual modeling facilitates flexible modifications. The enhanced Entity-Relationship (ER) model was employed in this study to develop conceptual schemas of IR data.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.109-112
• /
• 2017

WBAN (Wearable Body Area Network)는 옷이나 몸에 이식된 디바이스들이 몸을 중심으로 결합이나 통신하는 네트워크를 뜻한다. 여기서 사람이 몸에 착용하는 장치인 웨어러블 디바이스는 가벼운 형태의 배터리를 요구한다. 그로 인해, 다른 기기들과는 달리 짧은 배터리 수명을 가질 뿐만 아니라 통신에 관한 제약을 발생시킨다. 따라서 본 논문에서는 저전력 프로토콜을 지원하는 다중대역 웨어러블 디바이스 제어 시스템을 제안한다. 이를 위해 BLE (Bluetooth Low Energy) 기반의 프로토콜 스택으로 BLE, 6LoWPAN (IPv6 over Low power WPAN), CoAP (Constrained Application Protocol)을 적용해 데이터 패킷 크기를 감소 시키고 BLE/Wi-Fi 선택 기능을 통해 통신 제약을 완화하고 전체적인 WBAN 에서의 소비 전력을 감소하고자한다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.71-73
• /
• 2007

본 논문에서는 새로운 연료전지용 3상 전류형 능동 클램프 DC-DC 컨버터를 제안한다. 전류형 컨버터 구조에 능동 클램프 회로를 채용하여 과도기에 발생하는 서지전압을 저감하였고 모든 스위치에서 영전압 스위칭을 하며, 그 장점으로 : 연속적인 입력전류, 전압 오버슈트 제거, 영전압 턴 온 스위칭, 고주파 변압기 1차/2차 측에 부가적인 스너버 회로의 필요성 제거, 소프트 스위칭에 의한 저속 다이오드 적용 등이 있다. 더구나 대용량 발전 시스템에 적합하도록 전류형 컨버터 구조와 3상 전력변환 회로를 결합하였다. 3상 전력변환 적용의 장점은 : 입력전류 및 출력전압 주파수의 3배 증가, 스위치에 흐르는 RMS 전류 저감, 필터소자 용량 및 부피 감소, 고주파 변압기 이용률 증가, 전력회로의 단순화에 따른 전체 사이즈 축소 및 신뢰성 향상 등이 있다. 제안하는 3상 전류형 능동 클램프 DC-DC 컨버터는 이러한 장점들 때문에 발전용 연료전지 시스템의 승압형 DC-DC 컨버터에 적합하며 대용량 태양전지 발전 시스템 및 배터리 충전기 등에도 적용할 수 있다. 새로운 3상 DC-DC 컨버터와 함께 3상 PWM 알고리즘을 제안하며, 시뮬레이션과 프로토타입 제작, 실험을 통하여 그 성능을 평가, 확인한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.428-428
• /
• 2010

유기 발광 소자내의 전공과 전자의 균형과 효율적인 재결합을 통한 발광소자의 효율 향상을 위한 다양한 연구가 소자의 응용에 매우 큰 영향을 주고 있다. 그러나 대부분의 전도성 유기물내에서 정공의 이동도 가 전자의 이동도 보다 100 배 정도 빠르기 때문에 발광 효율을 향상시키기 위한 효율적인 전자 주입이 요구된다. 본 연구에서는 전자주입효율을 향상하기 위하여 강한 전자 받게 역할을 하는 플러렌($C_{60}$)의 장점을 이용한 이중 전자 주입층을 제작하고 녹색 유기 발광 소자에 사용하여 발광효율의 변화를 관찰하였다. 유기 발광 소자에서 전자의 이동도를 향상하여 발광 층내로 주입되는 전자의 주입량을 증가하여 엑시톤 형성 확률을 높이기 위하여 전자 주입 층 내에 $C_{60}$을 첨가하였다. $C_{60}$만으로 이루어진 단층 전자 주입 층으로 구성된 유기발광 소자는 Al과 $C_{60}$ 계면사이에 거칠기가 큰 계면으로 인해 발생된 누설전류로 인해 Cesium flouride (CsF) 단층 전자 주입 층에 비해 낮은 발광효율을 나타냈다. 플러렌의 높은 전자전도성을 유지하며 누설전류의 흐름을 방지하기 위하여 매우 얇은 CsF층을 알루미늄 금속과 플러렌사이에 형성함으로써 플러렌과 Al 사이의 공유결합을 없애 누설전류를 줄였으며 Cs의 무거운 원자량으로 인해 전자 수송층으로의 확산되는 량이 적어 발광층에서 엑시톤의 재결합효율이 개선되어 유기발광 소자의 발광효율 향상이 나타남을 관찰하였다.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.4
• /
• pp.273-283
• /
• 2015

In this study, we suggested the methodology and the results of planning of promising technologies in mechanical engineering by focusing on the case of the Korea Institute of Machinery and Materials (KIMM). For dedicated commitment to planning of promising technologies, KIMM newly introduced task-force called as 'specialist unit'. In addition, KIMM combined the investigation of external environments with the analysis of internal capabilities of KIMM and utilized the bibliographic coupling analysis in the process of the exploring sub themes. Finally, we provided 8 promising fields and their sub themes in the mechanical engineering. Our study contributed to the strategic development of the main research programs of KIMM. Our findings can be also utilized as the best practice of planning of promising technologies in the field of mechanical engineering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1169-1174
• /
• 2004

This study was carried out to assess the effects of electron beam (EB) radiation on the conformational changes of ovalbumin (OVA), based on the early works using gamma irradiation. The applied doses of OVA used were 3,5,7, and 10 kGy, respectively. The conformational alterations were measured with SDS-PAGE, GPC-HPLC, and competitive indirect enzyme-linked immunosorbent assay (Ci-ELISA) using monoclonal anti-OVA IgG antibody. Irradiation caused a degradation and/or an aggregation of OVA molecule. Immunochemical structures of irradiated OVA were altered by irradiation. Effects of gamma and electron beam radiation were similar at the same absorbed doses. These results may be used for inhibition of food allergy and development of immunogen with EB radiation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.49-58
• /
• 2004

Drift design of a high-rise building is a governing factor in the determination of structural weights and lateral resisting systems. However, high-rise buildings are composed of tens of thousands of structural member, designer can not know which members are active to lateral drift control and how much they contribute to lateral drifts. Resizing technique was proved to be a practical method for drift design of high-rise buildings. However, no resizing algorithm has been considered the effect of vertical loads in drift designs. Thus, in this paper, a resizing algorithm has been developed for drift designs of high-rise buildings subjected to both lateral and vertical loads. The drift design model has been applied to drift designs of two high-rise building examples.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.180-185
• /
• 1997

This work was carried out to investigate change of polygalacturonase activities and polygalacturonase patterns by gel filtration chromatography during softening of persimmon and jujube fruits. During softening of two kinds of fruit, polygalacturonase activities of water-soluble and salt-soluble proteins were increased, but that of cell wall-bound proteins was decreased. In water-soluble and salt-soluble proteins of persimmon fruits, two peaks of polygalacturonase activity were separated in mature stages, but one peak in soft stages. During softening of those fruits, the peaks of polygalacturonase activity in water-soluble and salt-soluble proteins appeared on the same fraction with the peaks of polygalacturonase activity in cell wall-bound proteins.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.169-175
• /
• 2009

In this experiment molybdeum oxide($MoO_3$) films were prepared by a magnetic null discharge(MND) sputtering system and fundamental properties by XRD, XPS and SEM analysis were investigated. The initial and mean insulation resistance of the same with $MoO_3$ film were about 1.4[$M{\Omega}$] and 800[$k{\Omega}$] under the condition of applied voltage of 400[V]. The preferred orientation in the films changed from(100) to (210) with substrate temperature. Two XPS peaks of the $MoO_3$ photoelectron were detected at the binding energies of 228.9[eV] and 232.4[eV], while the binding energy of the O1s peak was 532.6[eV]. The substrate temperature and reactivity gives large effects to the structure and growth of the film and system is also very useful for performing the uniform reactive deposition. It can be found from the result of a $MoO_3$ film deposition that the system is very useful for performing the uniform reactive sputtering.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.410-420
• /
• 2006

The dynamic effects, such as the steering and the screening effects during deposition on an epitaxial growth is studied by kinetic Monte Carlo simulation. In the simulation, we incorporates molecular dynamic simulation to rigorously take the interaction of the deposited atom with the substrate atoms into account, We find three characteristic features of the surface morphology developed by grazing angle deposition: (1) enhanced surface roughness, (2) asymmetric mound, and (3) asymmetric slopes of mound sides, Regarding their dependence on both deposition angle and substrate temperature, a reasonable agreement of the simulated results with the previous experimental ones is found. The characteristic growth features by grazing angle deposition are mainly caused by the inhomogeneous deposition flux due to the steering and screening effects, where the steering effects play the major role rather than the screening effects. Newly observed in the present simulation is that the side of mound in each direction is composed of various facets instead of all being in one selected mound angle even if the slope selection is attained, and that the slope selection does not necessarily mean the facet selection.