• Journal of the Korea Concrete Institute
• /
• v.25 no.1
• /
• pp.37-43
• /
• 2013

Recently, experimental and analytical researches have been performed in order to find interface failure between FRP plate and concrete in near surface-mounted (NSM) retrofit using FRP plate. As a result, it was found that the bond strength between concrete and NSM FRP plate had a close relationship with shape of FRP, concrete compressive strength and bond length. However, research need is increasing about another factors such as suitable space of FRP plate and group effect. In this study, therefore, a bond test was performed with aforementioned factors and compared with a previous equation to verify its suitability for predicting bond strength of NSM FRP plate. From the test, it was found that the bond strength increased according to the increase of space of NSM FRP plates even if its bond length was same. The splitting failure of concrete governed when space of FRPs was too narrow and it changed to FRP's tensile failure with increase of the space. From the evaluation of test specimens using previous equation, it was found that the bond strength could be predicted properly with consideration of group effect.

• Progress in Medical Physics
• /
• v.7 no.2
• /
• pp.67-77
• /
• 1996

Purpose: To get a 3-D coordinates of intracranial target position was investicated in axial, sagittal and coronal magnetic resonance imaging with a preliminary experimented target localizer. Material and methods : In preliminal experiments, the localizer is made of engineering plastic to avoid the distrubance of magnetic field during the MR image scan. The MR localizer displayed the 9 points in three different axial tomogram. The bright signal of localizer was obtjained from 0.1～0.3％ of paramagnetic gadolinium/DTPA solution in T1WI or T2WI. In this study, the 3-D position of virtual targets were examined from three different axial MR images and the streotactic position was compared to that of BRW stereotactic system in CT scan with same targets. Results: This study provided the actual target position could be obtained from single scan with MRI localizer which has inverse N-typed 9 bars. This experiment was accomplished with shimming test for detection of image distortion in MR image. However we have not found the image distortion in axial scan. The maximum error of target positions showed 1.0 mm in axial, 1.3 mm for sagittal and 1.7 mm for coronal image, respectivelly. The target localization in MR localizer was investicated with spherical virtual target in skull cadaver. Furthermore, the target position was confirmed with CRW stereotactic system showed a 1.3 mm in discrepancy. Summary : The intracranial target position was determined within 1.7 mm of discrepancy with designed MR localizer. We found the target position from axial image has more small discrepancy than that of sagittal and coronal image.

• The Journal of Internal Korean Medicine
• /
• v.25 no.3
• /
• pp.529-538
• /
• 2004

This clinical study on 93 cases of Dyslogia after stroke confirmed through brain CT, MRI scan and clinical observation. They were hospitalized in the oriental medical hospital of Dong-Eui University from january to September 2003. The following results were found: I. The ratio between males and females was 1.6:1. Of Dyslogia p who had suffered stroke, most were in their sixties. 2. Categorized by attack site, right hemiplegia patients comprised 15 cases(l6.1%), and left hemiplegia patients, 71 cases(54.8%), so the ratio between Rt. and Lt. was 1:4.7. 3. Categorized by preceeding disease, hypertension was seen 51 cases(54.8%), and diabetes mellitus was seen 21 cases(22.6%). 4. Categorized by repeat attack, it was the first attack for 71 cases(76.3%), and the second attack for 13 cases(l4.0%), and for 9 cases(9.7%) it was the third or nth attack. 5. According to the classification of Zhang Zhongjing, apoplexy involving Bu-organs comprised 42 cases(45.2%), apoplexy involving meridians 39 cases(41.9%), apoplexy involving Jang-organs 11 cases(11.8%), and for apoplexy involving collaaterals there was one case(1.1%). 6. According to the classification of Cheng Zhongling, 43 cases(46.7%) were classed heart meridian, 25 cases(27.2%) were classed Spleen meridian, and 24 cases(26. 1%) were classed Kidney meridian. 7. According to the classification of Sun Simiao, 49 cases(52.7%) were classed Pyungo, two cases(2.2%) were classed Pungeui, ,seven cases(7.5%) were classed Pungbi( I ), and two cases(2.2%) were classed Pungbi( II ).

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.242-250
• /
• 1996

The effects of annealing in magnetic field after deposition on electromagnetic properties of $Ni_{81}Fe_{19}$ thin($400\;{\AA}$) films prepared by RF-magnetron sputtering were investigated in terms of microstructure and surface morphology. The coercivity of the films was decreased below $300^{\circ}C$ due to stress relief and recrystallization, while increased at $400^{\circ}C$ due to grain growth and increasing the surface roughness. And then, $4{\pi}M_{s}$, was almost independent of annealing temperatures. Increasing the annealing temperature. the electrical resistivity of films was decreased from $37\;{\mu}{\Omega}cm$ to $24\;{\mu}{\Omega}cm$, the magnetoresistance was nearly a constant of about $0.6\;{\mu}{\Omega}cm$, and the MR ratio was increased from 1.5 % to 3.1 %. Therefore, It was shown that increasing the magnetoresistive ratio was mainly affected by decreasing the electrical resistivity. Considering the practical application of the films for magnetoresistive heads, optimal annealing conditions was obtained after one hour annealing at $300^{\circ}C$ in 400 Oe unidirectional magnetic field.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.49-54
• /
• 2017

Purpose The high-dose administration of I-131 has been standing for the basic therapy method of thyroid cancer. In korea, it is not necessary for patients to be hospitalized if the administration dose are under 1.2 GBq. However, if the dose are over 1.2 GBq, the patients should be stay in special ward with radiation shield. In such cases, the radioactivity level upon release should be under a dose of $70{\mu}Sv/hr$ at a distance of approx. 1m. This regulation bring the patients to stay for about 2 to 3 days in ward before the release. Materials and Methods Using the inpatients' release data of severance hospital, an inpatient-days were retrospectively calculated and compared with practical data and estimate the inpatient-days with the conditions of korea ($70{\mu}Sv/hr$), Japan ($30{\mu}Sv/hr$), germany ($3.5{\mu}Sv/hr$ at a distance of approx. 2 m), and other european countries. Results When a effective half-life of 15.4 was used, the expected inpatient-days were calculated as 2.15 days in the condition of Japanese regulation and 1.37 days in the condition of korean regulation. The practical inpatient-days of patients in Severance hospital were 1.32 days. Conclusion As ICRP 94 has been mentioned that the release of patients administrated with I-131 for the therapy should be carefully considered because each patients has different thyroid uptake rate and their conditions with family members after the release from the ward. Nonetheless, efforts to bring more aquate data which is for getting closer to the practical data should be continuously studied.

• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.111-118
• /
• 2007

Global warming crisis due primarily to continued green house gas emission requires impending change to renewable alternative energy than continuously depending on exhausting fossil fuels. Bioenergy including biodiesel and bioethanol are considered good alternatives because of their renewable and sustainable nature. Bioethanol is currently being produced by using sucrose from sugar beet, grain starches or lignocellulosic biomass as sources of ethanol fermentation. However, grain production requires significant amount of fossil fuel inputs during agricultural practices, which means less competitive in reducing the level of green house gas emission. By contrast, cellulosic bioethanol can use naturally-growing, not-for-food biomass as a source of ethanol fermentation. In this respect, cellulosic ethanol than grain starch ethanol is considered a more appropriate as a alternative renewable energy. However, commercialization of cellulosic ethanol depends heavily on technology development. Processes such as securing enough biomass optimized for economic processing, pretreatment technology for better access of polymer-hydrolyzing enzymes, saccharification of recalcitrant lignocellulosic materials, and simultaneous fermentation of different sugars including 6-carbon glucose as well as 5-carbon xylose or arabinose waits for greater improvement in technologies. Although it seems to be a long way to go until commercialization, it should broadly benefit farmers with novel source of income, environment with greener and reduced level of global warming, and national economy with increased energy security. Mission-oriented strategies for cellulosic ethanol development participated by government funding agency and different disciplines of sciences and technologies should certainly open up a new era of renewable energy.

• Weed & Turfgrass Science
• /
• v.2 no.4
• /
• pp.341-347
• /
• 2013

The survey of weed occurrence was conducted to identify problematic weed species on the paddy field. Total 524 sites of the 17 regions in Chungnam Province in Korea were investigated from June to August, 2013. In the whole region, 23 weed species were identified including 19 annuals and 4 perennials. The most dominant weed species in Chungnam paddy fields were Echinochloa crus-galli (25.3%), followed by Monochoria vaginalis (11.9%), Eleocharis kuroguwai (10.3%), Bidens tripartite (9.3%) and Aneilema japonicum (8.5%). The 95.2% of the investigation sites was determined under dominance value 1 (range of cover <10: numerous individuals) by Braun-Branquet indicating proper weed control in the paddy fields. This information could be useful for estimation of future weed occurrence, weed population dynamics and establishment of weed control methods in Chungnam Province in Korea.

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.42-50
• /
• 2011

In the 21st century, people began to pay more attention on the culture, and the chances for them to participate in the cultural lives also increased. The spaces for entertainments can also be deemed as the center of the cultural contents. The entertainment is, in consideration of its definition by the literal meaning and the origin of the word itself, 'an act that entertains, or any artificial creation that is designed to give entertainment with a view to relieve the subjects from the burdens they have as they live.'Of the modem entertainment spaces, the one with the most profound visual manifestation of the entertainment element is the club. The purpose of this study is to examine the influence from the entertaining element manifested in the club spaces. Only until a few years back, the club spaces were deemed with negative impressions that comes with the more negative side of the entertaining world. But, recently such negative impressions are lift off considerably, and the club spaces are regarded with positive impressions as to be the kind of place where the young people can enjoy performances and other kind of culture in healthy atmosphere. In Chapter 2, we will examine the entertainment and the nature of the pleasure it gives, as well as the correlation between the entertaining environments and the pleasure they give. In chapter 3, the entertaining elements within such contexts are classified into the experience, form, color, objects, and the lightings and examine the characteristics of each of them. Also, the influences of these elements to the entertaining environment will be reviewed. In the case study in chapter 4, 9 overseas and domestic club spaces that were introduced in 'Interior World' magazines, that is, in the issues that are focused on 'Entertainment,'such as Issue 59, 68, and 79. As a result of the analysis, the influences of the entertaining, or pleasing, elements were discovered. The particular expression characteristics of the pleasing designs in the club spaces are, namely, the form elements, material elements, color elements, objects elements, and the lighting elements. As the society changes and the cultural level goes up, the club spaces are required to adopt more changes. Therefore, the pleasing elements of the space should receive further emphasis. These elements will act as a trend in the space and make the people appreciate the space more refreshing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.309-309
• /
• 2011

지구온난화와 도시기후 변화에 대응하기 위해 자연의 생태적 기능을 복원하고 환경에 대한 오염부하를 저감하여 도시 환경의 건강성과 지속성을 높이기 위해 도심 내 물순환시스템(urban water circulating system)의 구축이 요구된다. 즉, 물순환시스템을 활용하여 도심 내 다양한 수원(생태하천/호수 유지용수, 하수처리수, 우수, 지하수 등)을 네트워크 및 통합 관리하여 도시 내 물순환의 건전성과 수자원의 재이용률을 향상시킬 수 있다. 이를 위해서 연중 발생량이 일정하고 막대한(66.4억톤/년, 2009년 기준) 하수처리수 방류수는 고도처리를 통해 수질이 양호하며 안정적인 대체 수자원으로 고려된다. 또한, 하수처리수의 재이용은 공공수역으로 배출되는 오염부하량의 총량 삭감 및 상수사용량의 절감과 수자원을 효율적으로 이용한다는 면에서 최근 재이용 사례가 증가하고 있는 추세이다. 그러나, 도심 내 친수공간(생태하천/호수)은 저류수량에 비해 유입수량이 적어 체류시간이 비교적 장시간이고, 이로 인해 부영양화가 쉽게 발생해 수질이 악화된다. 따라서, 본 연구에서는 하수처리수 재이용수를 도심 내 친수공간의 유지용수로 활용 시, 수질정화공정(응집 후 여과, 응집 후 여과+한외여과, 응집 후 여과+한외여과+역삼투 공정)이 친수공간 내 조류성장에 미치는 영향을 파악하기 위해, 하수처리수 재이용수 pilot plant의 수질정화공정별 유출수를 활용해 M. aeruginosa를 시험조류로 조류성장(growth kinetics)을 조사하였다. 조류는 $5\times104$ cells/mL의 초기 농도로 접종하여 배양하였으며, 조류성장에 직접적인 제한인자인 용존반응성인의 농도에 따른 성장속도를 Monod와 변형 Monod Kinetics를 이용해 반포화상수(Ks)와 최대 성장속도(${\mu}$max)를 산정하였다. 실험결과, 역삼투 공정을 제외한 다른 수질정화공정은 비록 영양염류가 80~90% 이상 제거되어 수계의 화학적 성상이 변하였으나 조류성장역학의 변화는 통계학적 (p=0.05)으로 유의할만한 수준은 아닌 것으로 판명되었다. 또한, 수리학적 체류시간이 2주 이상이 될 경우, 역삼투 공정을 제외한 수질정화공정 별 유출수에서는 조류의 과다성장으로 인해 부영양화가 발생하는 것으로 판명되었다. 결론적으로 하수처리수 재이용수를 친수용수로 활용시, 조류성장을 방지하기 위하여 용존반응성인의 농도를 중점적으로 관리하는 수질정화공정 및 유지용수 공급방안을 고려해야하는 것으로 판단된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.732-738
• /
• 2015

Quality characteristics of Korean cabbage treated with red clay-processed materials (RCPM) were evaluated. Two different types of RCPM treatments including a control were applied for the cultivation of cabbage. General components, nutrients, antioxidant activities, textures, and sensory evaluation were assessed. For the nutrition components analysis, RCPM-treated cabbage showed higher contents of potassium and riboflavin along with lower content of sodium compared to the control. RCPM-treated cabbage exhibited higher total polyphenol contents than those of the control, indicating higher antioxidant activities. For the textural analysis under refrigeration over 4 weeks, RCPM-treated samples showed more stable textures based on higher hardness values than the control and RC. Results of this study indicate that RCPM would be of benefit to produce high-value added cabbage of premium quality.