• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.15-25
• /
• 2017

The findings were summarized as follows. The safety check by manufacturer showed that 6 of 13 companies are over the average occurrence of defects. It was expected that there would be a difference between manufacturing technology capability and production system of each manufacturer. Consequently, manufacturers should institutionally improve and strengthen certification items for the upward standardization of safety certification before factory. Second, the safety check by year showed that the results of this study accord with those of previous studies on defect time. Consequently, manufacturers should classify the 3-year-old equipment for vehicle-mounted MEWP into a special check subject to do a nondestructive test according to proven results, and also reflect the test in a safety test system to do regular preventive activities of equipment defects. Third, the safety check by part showed that the boom and outrigger parts of vehicle-mounted MEWP have the most defects. Stress concentration resulted in defects as the boom part was most frequently operated in the structural parts for a real work. To prevent this, it is suitable to improve the hardness of boom materials. The outrigger part needs improvement in safety devices with materials. As an outrigger supports the overturning moment of equipment, it is most affected by its load based on the operating radius, resulting in fatigue crack.

• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.321-328
• /
• 2001

This paper presents the tensile behavior of stud connections installed between reinforced concrete and steel members. Eight specimens are tested to verify the factors influencing the tensile behavior of the connection. Major variables considered in the test are the reinforcement ratios of concrete member and connection details. Test results indicate that the reinforcing bars near stud bolts contribute to the increase of the tensile strength of the member as well as to the reduction of brittle failure. It is shown that C-type or U-type connection has relatively high ductility. From the evaluation on the tensile strength of test results including those of peformed by previous researchers, it was shown CCD (Concrete Capacity Design) method overestimated the strength. In this paper, the reduction factor of 0.75 ø instead of ø is suggested for design purpose of the stud connection.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.741-749
• /
• 2014

Prestressed hollow-core (PHC) slabs are structurally-optimized lightweight precast floor members for long-span concrete structures, which are widely used in construction markets. In Korea, the PHC slabs have been often used with cast-in-place (CIP) topping concrete as a composite slab system. However, the PHC slab members produced by extrusion method use concrete having very low slump, and it is very difficult to make sufficient roughness on the surface as well as to provide shear connectors. In this study, a large number of push-off tests was conducted to evaluate interfacial shear strengths between PHC slabs and CIP topping concrete with the key variable of surface roughness. In addition, the horizontal shear strengths specified in the various design codes were evaluated by comparing to the test results that were collected from literature.

• Journal of Korea Game Society
• /
• v.18 no.5
• /
• pp.67-76
• /
• 2018

The interaction between users and games is an important factor in game development. In this paper, we consider Leaderboard UI in shooting game and study user's performance level according to presence or frequency of providing Leaderboard UI. For this research, we developed a third person shooting game and conducted experiments for 80 college students. The results of the experiments were analyzed using statistical significance using the T-test method. Finally, in order to improve user's performance level, we conclude that the user's gaming experience is a bigger factor than the presence or frequency of providing Leaderboard, causing a significant difference.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1113-1119
• /
• 2003

We used isopropanol which has low boiling point to prepare thin films at low temperature and changed mole concentration of zinc acetate from 0.3 to 1.3 mol/l. The structural, optical and electrical properties of ZnO thin films with Zn content were investigated. ZnO thin films highly oriented along the c-axis were obtained at Zn concentration of 0.7 mol/l. ZnO thin films with Zn concentration of 0.7 mol/l showed a homogeneous surface layer of nano structure. The transmittance of ZnO thin films by UV-vis. measurement was about 87% under the Zn concentration of 0.7 mol/l, but rapidly decreased over the 1.0 mol/l. The optical band gap energy was obtained from 3.07 to 3.22 eV which is very close to the band gap of bulk ZnO (3.2 eV). The electrical resistivity of ZnO thin films was about 150 $\Omega$-cm that shows little difference with Zn concentration. I-V curves of ZnO thin films exhibited typical ohmic contact properties.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.5
• /
• pp.971-986
• /
• 2014

When thousands of hypotheses are tested simultaneously, the probability of rejecting any true hypotheses increases, and large multiplicity problems are generated. To solve these problems, researchers have proposed different approaches to multiple testing methods, considering family-wise error rate (FWER), false discovery rate (FDR) or false nondiscovery rate (FNR) as a type I error and some test statistics. In this article, we discuss Bonferroni (1960), Holm (1979), Benjamini and Hochberg (1995) and Benjamini and Yekutieli (2001) procedures based on T statistics, modified T statistics or local-pooled-error (LPE) statistics. We also consider Sun and Cai (2007) procedure based on Z statistics. These procedures are compared in the simulation and applied to Arabidopsis microarray gene expression data to identify differentially expressed genes.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.69-74
• /
• 2005

Despite the advancement of knowledge and techniques, architectural design has been developed by similar method and science as the logical tool since the development of Le Corbusier's 'module'. However, in the new millenium emotional design has become a key issue and today is the turning point regarding new method for designing human space. While architecture discipline of the West focused on logic, Japan based its origin in eastern discipline has developed a unique design concept called 'metabolism' and advanced it very effectively. Since its development of the unique concept, Toyo Ito has become one of the most Influential architect in and out of Japan who devoted his design career in developing new space concept. This study is specifically focused on Ito's project by finding characteristics of his projects and analyze emotional design factors by using 5 analytical tool - experiencing the space, five senses, landmark, sequence, and scale. Ito's work between 2000-2004, such as Sendai Mediatheque, showed more visible sign of emotional design characteristics compared to the works done in 1990's. Because of the analytical studies researching those emotional design characteristics and methods, the future advancement in new space design will be possible with great success. The result proves that continuing proper analysis and research in design method will assist in approaching new space design method into more advanced realm in very efficient time period with more definite design elements to accomodate and fulfill human needs in given space.

• Korean Institute of Interior Design Journal
• /
• v.16 no.6
• /
• pp.189-196
• /
• 2007

The purpose of this study is to make a comparative analyzation toward abstracted emotional properties appeared in the museum exhibition spaces designed by the three masters of the modern architecture;Frank Lloyd Wright, Le Corbusier and Mies van der Rohe. In addition, this study will also aim to inquire into how the emotional properties have affected the third generation architects. It is especially expected that the 'emotional tendency' emerging in various fields of the present time can serve as useful information through the analysis of emotional design properties appeared in the exhibition space which is directly linked with the human lives. In order to achieve the purpose of the study, in New York by Wright, in Tokyo by Le Corbusier and in Berlin by Mies Van der Rohe were selected. As for the analyzation methodology to be adopted for deriving the aiming points at the emotional design, five criteria of analyzation have been established in order to understand the properties of the emotional area: they are (1) spatial affordance, (2) human congeniality, (3) emotional factors of the area, (4) constitution of the area and (5) expressive division of the area. Using these criteria, this study will reveal what are some of the emotional characteristics shown in each museums and its analytical result will be useful to apply to future museum design. It is especially expected that the 'emotional tendency' emerging in various fields of the present time can serve as useful information through the analysis of emotional design properties appeared in the exhibition space of design which is directly linked with the human behavior.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.1-8
• /
• 2018

The object of this paper is to find the characteristics of fire proof materials through an analytical method and to suggest a proper approach for fire-proof design of reinforced concrete beam strengthened with fiber reinforced polymer (FRP). Heating tests for fire-proof materials were conducted and the thermal conductivities and specific heats of them were simulated through finite element analyses. In addition, a finite element analysis on the beam specimen strengthened with FRP under high temperature, which was conducted by previous researchers, was performed and the analytical result was compared with test result. And then the compatibility of the analytical approach was evaluated. Finally, the heat resistance characteristic of RC beam strengthened with FRP was analyzed by the proposed analytical method and the strength decrease of the beam due to the high temperature was evaluated. From the comparison with analytical and test result, it was found that the heat transfer from outside to inside through the fire-proof materials can be suitably simulated by using the proposed analytical approach.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.309-318
• /
• 2000

우리나라에서는 1989년 1월 1일 이후 허가된 신약과 동일한 의약품을 제조하거나, 제제개선을 통하여 흡수율을 향상시키는 경우 등에 있어서 생물학적 동등성 시험을 실시하여 두 제제간의 생체이용률을 비교하도록 규정되어 있다. 다른 나라에서도 신약과 동일한 의약품을 허가 받고자 할 경우나 대체조제를 위한 복제의약품의 생산 시 생물학적 동등성 시험자료를 제출하도록 하고 있으며, 이에 따른 생물학적 동등성 시험 기준을 운영하고 있다. 최근 각국에서는 국제적 조화를 이룬 기준을 마련하고자 하는 추세이다. 현재 우리나라에서는 의약분업 실시에 따라 생물학적 동등성 시험의 중요성이 부각되고 있으며 국제적인 수준에 맞추어 관련 기준을 개정해야할 필요성이 대두되고 있다. 캐나다에서는 1992년에 처음 생물학적 동등성 시험 기준을 공표하여 평가하고 있다. 본 논문에서는 캐나다의 생물학적 동등성 시험 기준을 소개하여 현행 규정과 비교 검토함으로써 생물학적 동등성 시험 기준을 보다 과학적이고 윤리적이며 합리적인 규정으로 개정하기 위한 자료로 활용하고자 한다.