• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.683-688
• /
• 2004

NAT is a very useful IP address translation technique that allows two connected networks using different and incompatible IP address schemes. But it is impractical to use NAT for an application which uses the encrypted IP packet, embedding IP addresses inside of data payloads, to guarantee End-to-End Security such as IPSec. In addition to rewriting the source/destination IP addresses in the packet, NAT must modify IP checksum every time, which could lead to considerable performance decrease of the overall system in the process of the address translation. RSIP is an alternative to solve these disadvantages of NAT and the address shortage problems. Both NAT and RSIP divide networks into inside and outside addressing realms. NAT translates addresses between internal network and external network, but RSIP uses a borrowed external address for outside communications. RSIP server assigns a routable public address to a RSIP client temporarily to communicate with public net-work outside of the private network. In this paper, RSIP gateway for intranet environment is designed and its performance is evaluated. From the results of performance evaluation, we knew that RSIP is operated less sensitive to the data traffic. Also, the experiment shows that RSIP performs better than NAT when the transmission data grows larger.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.226-235
• /
• 1999

To investigate SPICE noise model and the behavior of its parameters, 1/f noise of NMOS devices fabricated by BiCMOS process is measured and compared to the various noise models and measured results. For the long channel devices, bias dependence of the drain current noise power spectral density $S_{Id}$ of NMOS is similar to the previous results. Equivalent gate noise power spectral density $S_{Vg}$ shows weak dependence on the gate and drain voltages in long channel NMOS as the previous results. However, it is shown that most of published noise models are difficult to apply to short channel devices. Therefore, in this study, with comparison of our experimental results, we have tried to find the model of 1/f noise, appropriate for our NMOS device fabricated by BiCMOS process.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.79-88
• /
• 2012

In this paper, we design a mutual authentication protocol which divided sessions from an authenticated session are updated periodically. And in order to minimize the traffic overhead for session authentication, we also introduce dynamic session management according to sampling rate of medical sensor type. And randomize the divided session time. This model has the effect of blocking the integrity and confidentiality intrusion of rogue gateway. Moreover, efficiency is provided through medical data to be transmitted have different sampling rate. In order to evaluate this model, it was embodied and experimented in TinyOS 2.1 environment. The result, we got an overall validity from three types of experiment.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.109-121
• /
• 1996

It is very difficult to exchange geographical data among geographical information systems which store their spatial data with independent storage structures. Since, moreover, large amount of storage space is necessary to store spatial data and ex pen sive cost is required to input them, waste will grow as they are stored redundantly. Therefore, it is essential to share them with other geographical information systems by exchanging spatial data among them. In order to exchange spatial data efficiently, there exist several international standards for data exchange format. In this paper, we design and implement a data conversion system that converts geographical data between SDTS (Spatial Data Transfer Standard) which is adopted as the national standard for common data exchange format and Informap which is the existing mapping system. We first analyze the storage structures of SDTS and Informap, respectively and develop gateway functions according to these analyses for efficient conversion. Finally, we design and implement the overall data conversion system between SDTS and Informap using the gateway functions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.193-193
• /
• 2010

서로 다른 유전 물질을 이용하여 다층구조의 터널장벽을 이용하여 비휘발성 메모리 소자의 동작 특성 및 전하보존 특성을 향상시킬 수 있음이 보고되었다.[1-3] 본 연구에서는 $SiO_2/Si_3N_4/SiO_2$구조의 다층 구조의 터널 장벽을 이용하여 $WSi_2$ 나노 입자 비휘발성 메모리 소자를 제작하였다. P-형 Si 기판에 100 nm 두께의 Poly-Si 박막을 증착시켜 소스, 드레인 및 게이트 영역을 포토 리소그래피를 이용하여 형성하였다. $SiO_2/Si_3N_4/SiO_2$(ONO) 터널장벽은 CVD (chemical vapor deposition) 장치로 각각 2 nm, 2 nm 와 3 nm 두께로 형성하였으며, 그 위에 $WSi_2$ 박막을 3~4 nm 마그내트론 스퍼터링 방법으로 증착하였다. ONO 터널 장벽구조 위에 $WSi_2$나노입자를 형성시키기 위해, $N_2$분위기에서 급속열처리 방법을 이용하여 $900^{\circ}C$에서 1분간 열처리를 하였다. 마지막으로 20 nm 두께의 컨트롤 절연막을 초고진공 스퍼터를 이용하여 증착하고, Al 박막을 200 nm 두께로 증착하였다. 여기서. 제작된 메모리 소자의 게이트 길이와 선폭은 모두 $10\;{\mu}m$ 이다. 비휘발성 메모리 소자의 전기적 특성은 HP 4156A 반도체 파라미터 장비, Agilent 81104 A 80MHz 펄스/패턴 발생기를 이용하였다. 또한 전하 저장 터널링 메커니즘과, 전하누설의 원인을 분석하고 소자의 열적 안정성을 확인하기 위하여 $25^{\circ}C$ 에서 $125^{\circ}C$ 로 온도를 변화시켜 외부로 방출되는 전하의 활성화 에너지를 확인하여 누설근원을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.13-22
• /
• 2010

Independent-Gate-Mode Double-Gate(IGM-DG) MOSFET overcomes the limitation of bulk-MOSFET's channel controllability and enables to control the front and back-gate voltages independently. Therefore, circuit designs utilizing the IGM-DG MOSFETs provide the advantage of setting 4-terminal freely, hence achieving not only the performance improvement but also the larger scale integration. This paper presents a 15Gb/s optical receiver with a 1.0V power supply voltage, which consists of a transimpedance amplifier (TIA), a feedforward limiting amplifier (LA), and an output buffer. HSPICE simulations were conducted to confirm the circuit performance, and also to verify the circuit stability issues which may occur from the variations of process and supply voltage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2301-2306
• /
• 2008

SIP(Session Initiation Protocol) has become an universal standard for multimedia communications for both wired and wireless networks since it has been adopted as a standard protocol for IMS platform in 3GPP standardization organization at November 2000. In this paper, we design and implement a SIP-based softphone client program which provides telephony service between internet users and a call center equipped with VoIP gateway. A softphone client based on PC-to-phone connection should guarantee to provide interoperability with various VoIP gateways and higher portability to be able to operate on different PC environments. The softphone client program in this paper has been developed with SIP 2.0 standard protocol to support interoperability and with JAIN SIP and JMF package to achieve higher portability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.194-198
• /
• 2021

LoRa is a physical layer technology that is designed to provide a reliable long-range communication with introducing CSS and with introducing a loco parentis tree network. Since a leaf can utilize multiple parents at the same time with a single transmission, PDR increases logarithmically as the number of gateways increases. Because of the ALOHA-like MAC of LoRa, however, the PDR degrades even under the loco parentis tree topology similarly to the single-gateway environment. Our proposed method is aimed to achieve SDMA approach to reuse the same frequency in different areas. For that purpose, it elaborately controls each TxPower of the senders for each message in concurrent transmission to survive the collision at each different gateway. The gain from this so-called capture effect increases the capacity of resource-hungry LPWAN. Compared to a typical collision-free controlled-access scheme, our method outperforms by 10-35% from the perspective of the total count of the consumed time slots. Also, due to the power control mechanism in our method, the energy consumption reduced by 20-40%.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.47-55
• /
• 2011

The optimum mold design and the optimum process condition were constructed upon executing process simulation of rubber injection molding with the commercial CAE program of MOLDFLOW (Ver. 5.2) in order to solve the process-problems of K company relating to cracks, which occurs at the inner cavity wall of C. V. joint boots. As a result it was confirmed that the real cracks occurs at the exactly same position of the cavity as exhibits the defects of weld and meld line and unsatisfactory curing according to the result of simulation. In order to prevent the occurrence of weld and meld line at the defect-position, the location of gate was altered to the optimum position of the cavity. Consequently the filling pattern was established to minimize the degree of the melt-fronts confronting or the melt-flows melding to prevent the occurrence of weld and meld line at the defect-position. It was observed that both gate-positions to maximize the degree of the formation of weld and meld line and air traps are located, respectively, in opposite direction each other with reference to the optimum gate position. In addition, the temperature of mold was raised by $10^{\circ}C$ and maintained at $170^{\circ}C$ for satisfactory curing.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.4
• /
• pp.625-634
• /
• 2014

Tactical networks is being operated in configuration that consisting of a variety of characteristics communication equipments and heterogeneous networks. In this configurations, end-to-end communication can be achieved using interworking gateway for converting the data format of the network and using encryption algorithm of the networks. The use of mechanism results in a problem that secure data cannot be transferred directly, reprocessing and processing delay of communication in heterogeneous tactical networks. That is, for encoding and decoding of data, the decryption of encrypted data and re-encryption processing must be required at the gateway between different networks. In this paper proposes to mechanism for end-to-end secure communication in heterogeneous tactical networks. Using the proposed method, end-to-end secure communication between heterogeneous tactical networks(PSTN-UHF networks) which removes the necessity of a gateway for converting data into data formats suitable for network to remove a transmission delay factor and enable real-time voice and data communication and achieve end-to-end security for heterogeneous tactical networks. we propose a novel mechanism for end-to-end secure communication over PSTN and UHF networks and evaluate against the performance of conventional mechanism. Our proposal is confirmed removal of security vulnerabilities, end-to-end secure communication in heterogeneous tactical networks.