• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.215-218
• /
• 2004

제품 발생 소음의 음질 (sound qualify)에 대한 관심이 높아지면서, 음질 제어가 제품 경쟁력 향상에 중요한 고려 요소가 되었다. 이러한 음질에 대한 객관적인 분석을 위하여 다수의 상용 프로그램이 개발되고 있지만 라우드니스 (loudness)를 제외한 음질인자 (sound quality metrics)들은 아직 표준화 작업이 이루어지지 않았기 때문에 프로그램에 따라 차이가 발생하고 있다. 본 연구에서는 음질 분석을 위한 4 개의 상용 프로그램을 이용하여 일정 신호의 라우드니스, 샤프니스 (sharpness), 러프니스(roughness), 변동강도 (fluctuation strength)를 계산하고, 그 결과를 비교, 분석하였고, 이미 표준화 된 라우드니스를 포함한 음질인자들의 계산 결과는 프로그램에 따라 무시할 수 없는 차이가 나타남을 확인하였다. 이는 제품의 음질 평가 시 사용된 분석 프로그램 따라 그 결과가 다를 수 있음을 의미한다. 본 연구를 통해서 얻은 결과는 향후 음질 인자의 표준화 및 음질 지수 개발에 중요한 자료로 사용 될 수 있다.

• 소음진동
• /
• 제6권4호
• /
• pp.499-502
• /
• 1996

Interior noise, engine speed and vehicle speed are measured under transient road-load condition and interior noise signal is transformed by using the transient signal analysis methods, such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise metrics such as the loudness, sharpness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running modes can be discussed in the viewpoint of noise quality.

• 한국소음진동공학회논문집
• /
• 제20권8호
• /
• pp.774-781
• /
• 2010

In Korea, the high-speed train is one of the most important mass transportation. Due to its fast speed, the interior noise level is high and it is one of major reason for passenger complaints. In this study, the response of passengers to interior noise was evaluated using sound quality parameters. The effects of various parameters, such as train types, travel speed, rail road, on the calculated sound quality were investigated. The characteristics of interior noise were identified. The obtained results were compared to auditory experimental data. For precise comparison of noises of similar loudness but with different characteristics, paired comparison method was used. From the comparison, important parameters that have influence on the annoyance and loudness of the noise were determined.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.485-494
• /
• 2006

The state-of-the-art of low-noise fan design usually includes the consideration of optimal sound level and sound quality. The influential design parameters of the noise level by the centrifugal fan were selected based on the preliminary test. The centrifugal fans were designed according to the experiment plan method by specifying the selected design parameters. The experiment with these machined mock-up's of centrifugal impellers suggested the major design parameters among many, having impacts upon the indices of sound quality (e.g. loudness, sharpness, roughness and fluctuation strength) at the same operation point. With the response surface method, the major design parameters selected thereafter were analyzed to estimate each contribution upon the sound quality of the centrifugal fan, and the optimal values were drawn by the consideration of the sound quality levels and their regression equations. In addition, the validity of the regression equations was numerically verified by means of the coefficient of determination. Furthermore, the mechanism by which the centrifugal fan impeller influences the determinants of its sound quality was suggested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.826-829
• /
• 2005

The State of the art of low noise fan design requires the consideration of optimal sound quality. The influential design parameters of the noise level by the centrifugal fan were selected that based on a preliminary test. The centrifugal fans were designed according from the experiment plan method by specify the selected design parameters. The experiments with the machined mock-up's of centrifugal impellers revealed the major design parameters having impacts upon the indices of sound quality (e.g. loudness, sharpness, roughness and fluctuation strength) at the same performance condition. With a response surface method. the major design parameters selected were analyzed to estimate their contributions upon the sound quality of the centrifugal fan and the optimal values were drawn for the consideration of the sound quality by using each level and its regression equation. In addition, the validity of the regression equations were numerically verified by means of the coefficient of determination. Furthermore, the mechanism of how the centrifugal fans influence the determinants of sound quality was suggested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.303-310
• /
• 2007

The vehicle noise is classified into interior and radiated exterior noise. And it influences on consumer‘s vehicle decision and traffic noise environment very much. In case of the vehicle exterior noise, it is related with traffic noise and in case of the interior noise, it is related with driver’s and passenger‘s sensitivity quality. Because these influenced on drivers and traffic environment, so standards are restricted by the laws and regulated for the measurement. But, the existence standards measuring the only sound pressure level are limit to reflect consumer’s sensitive aspects. Therefore in this study, the recent standards and laws were searched about domestic and abroad papers and the testing mode for the sound quality (SQ) evaluation was constructed about the vehicle interior noise. Finally, we aimed at the standard establishment to evaluate the vehicle interior SQ using statistics method.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1230-1237
• /
• 2007

The vehicle noise is classified into interior and radiated exterior noise. And it influences on consumer's vehicle decision and traffic noise environment very much. In case of the vehicle exterior noise, it is related with traffic noise and in case of the interior noise, it is related with driver's and passenger's sensitivity quality. Because these influenced on drivers and traffic environment, so standards are restricted by the laws and regulated for the measurement. But, the existence standards measuring the only sound pressure level are limit to reflect consumer's sensitive aspects. Therefore in this study, the recent standards and laws were searched about domestic and abroad papers and the testing mode for the sound quality(SQ) evaluation was constructed about the vehicle interior noise. Finally, we aimed at the standard establishment to evaluate the vehicle interior SQ using statistics method.

• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.923-929
• /
• 2017

모터로 구동되는 전기자동차에서 발생하는 소리의 특징은 일반적으로 내연기관 자동차보다 음압이 낮아, 보행자에게 접근하는 차량을 인지 못하는 경우가 종종 발생한다. 따라서 전기자동차에 추가적인 경고음이 필요하다. 잘 들리는 경고음을 개발하기 위해, 이번 연구에서는 화성학 이론과 신호처리를 기초로 제작하였다. 도로에서 측정된 배경소음은 합성된 신호에 추가되었다. 주관적 평가로 이 경고음의 인지성을 측정하였다. 심리음향 이론과 주관적 평가를 통해 인지성과 관련된 요소를 조사하였다. 라우드니스, 샤프니스, 러프니스 등 알려져 있는 심리음향 지표는 인지성과 낮은 상관성을 가졌지만, 반대로 음의 지속구간에 높은 상관성이 있음을 발견하였다.

• 한국음향학회지
• /
• 제37권3호
• /
• pp.147-155
• /
• 2018

본 연구의 목적은 선형 다중회귀분석을 통해 과부하 굴삭기 소음의 불쾌감을 표현할 수 있는 음질인자를 찾고 이를 이용하여 객관적인 평가를 위한 음질인덱스를 개발하고자 하였다. 이를 위해 소음특성이 다른 굴삭기 6모델을 선별하여 과부하 조건의 운전실 소음을 녹음하고 쌍대비교법과 크기평가법에 의한 청음평가를 수행하였다. 그리고 일관성이 낮은 청음평가 결과는 군집분석을 통해 선호도 성향이 다른 2 그룹으로 분류하고 회귀분석을 실시하여 어떤 음질인자가 불쾌감(낮은 선호도)에 유의한 영향을 주는 인자인지를 고찰하였다. 그 결과 불쾌감을 표현하는 음질인자는 10 Bark까지 부분 라우드니스 인자($PN_{10Bark}$)에 따라 불쾌감을 느끼는 성향을 가진 청음 평가자 그룹과 엔진 소음($dB_{EG}$)과 유압시스템 소음의 차이($dB_1$)로 표현된 인자에 따라 불쾌감을 느끼는 성향을 가진 청음 평가자 그룹으로 구성되어 있음을 확인하였다. 그리고 쌍대비교법의 선호도 순위와 성향 분석결과를 이용하고 크기평가법과의 상관분석을 통해 신뢰도가 낮은 평가자의 결과는 제외하여 보다 신뢰성 높은 크기평가법의 청음평가 결과를 얻었다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권2호
• /
• pp.19-25
• /
• 2016

Recently, drivers have begun to regard comfort in the cabin as one of the most important factors in construction equipment like forklifts. Accordingly, it has become more important to design a forklift cabin with a better sound quality as well as lower sound level, which can make a driver more comfortable. In this paper, the correlation between subjective evaluation and Zwicker's sound quality index was analyzed through a blind test by a few workers in forklifts and other construction equipment in several countries. Correlation analysis showed that Loudness and Sharpness were ranked in sequence, and tendencies were different from country to country. Also, contribution analysis for Loudness and Sharpness using operational transfer path analysis (OTPA), which is widely used in the field of noise, vibration, and harshness (NVH), was performed. However, Loudness and Sharpness cannot be used with OTPA directly because there are no linear relationships between the sources and receivers. In this paper, both are calculated by applying the DIN 45631 method with a contribution rate (%) of 1/3 Octave Sound Pressure Level by OTPA method in addition to considering spectral masking.