• Korean Journal of Veterinary Research
• /
• v.30 no.4
• /
• pp.473-478
• /
• 1990

This survey was conducted to observe the prevalence of blood parasites in slaughtered cattle included Korean native cattle, Charolias, Hereford, Aberdeenangus and Holstein breeds in the Western area of Kyeongnam. The results obtained are summarized as follows: 1. The prevalence of T sergenti was shown 71.8% as 395 heads of a total of 550 heads examined and from Jaunary to November the monthly prevalence of T sergenti was shown the range of 61.1% to 84% except 38.5% in December. The other blood parasites included Babesia and Anaplasma were not detected from the blood samples except Setaria spp microfilariae. 2. The distribution of parasitaemia levels of T sergenti in positive cattle was shown 93.9% in the range of 1~10/1000 rbc, 4.1% in 11~20, 1.3% in 21~30 and 0.8% above the range of 31. 3. The pervalence of T sergenti by breeds of slaughtered cattle was shown 71.2% in Korean native cattle, 72.7% in Charolias, 78.3% in Hereford and 81. 8% in others (Aberdeen-angus and Holstein) respectively. Also the parasitaemia levels in these cattle were shown higher levels in imported cattle included Charolias, Hereford, Aberdeen-angus and Holstein breeds comparing with Korean native cattle. 4. The prevalence of Setaria spp microfilariae in slaughtered cattle was shown 6.9% and by monthly prevalence of the parasite was shown higher in March, April and May compared with June, July, August and October. But in the winter season included January, February, November and December the parasite was not detected from the blood samples. 5. The distribution of parasitaemia levels of Setaria spp microfilariae per ml of blood was shown 65.8% in the range of 1~50, 13.2% in 51~100 and 10.5% in 101~200 and above the range of 201, respectively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.351-355
• /
• 2000

Penetrating injuries in the head and neck region are not common but can pose difficult situations to manage properly. In small cross-sectional area, the neck housed many vital structures, such as carotid artery, internal jugular vein, cervical spines, esophagus, laryngotracheal complex and nerves. Because each vital structure is located within the fascial compartments, bleeding into these closed spaces can give rise to compression of surrounding structures, which may result in compromised airway. Therefore, management of the penetrating injuries should be based on the fully understanding of anatomical relationships, accurate clinical examinations, a careful history taking and the proper treatment planning. We present two cases of penetrating injuries in the head and neck region and discuss on the clinical considerations for the proper management with the literature review.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1363-1369
• /
• 2008

As game and character animation industries are growing, techniques for reproducing realistic character behaviors have been required in various fields. Therefore, intensive researches have been performed in order to find various methods for realistic character animation. The most common approaches to character animation involves tedious user input method, simulation with physical laws based on dynamics, and measurement of actors' behaviors with input devices such as motion capture system. These approaches have their own advantages, but they all have common disadvantage in character control. In order to provide users with convenient control, the realistic animation must be generated with high-level parameters, and the modification should also be made with high-level parameters. In this paper we propose techniques for developing an automated character animation tool which operates with high-level parameters, and introduce techniques for developing actual games by utilizing this tool.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.75-81
• /
• 2018

The aim of this study was to evaluate the biomechanical behavior and long-term safety of high performance polymer PEKK as an intraradicular dental post-core material through comparative finite element analysis (FEA) with other conventional post-core materials. A 3D FEA model of a maxillary central incisor was constructed. A cyclic loading force of 50 N was applied at an angle of $45^{\circ}$ to the longitudinal axis of the tooth at the palatal surface of the crown. For comparison with traditionally used post-core materials, three materials (gold, fiberglass, and PEKK) were simulated to determine their post-core properties. PEKK, with a lower elastic modulus than root dentin, showed comparably high failure resistance and a more favorable stress distribution than conventional post-core material. However, the PEKK post-core system showed a higher probability of debonding and crown failure under long-term cyclic loading than the metal or fiberglass post-core systems.

• Pediatric Infection and Vaccine
• /
• v.7 no.1
• /
• pp.129-135
• /
• 2000

Purpose : We previously reported the short-term immunogenecity and safety of 47 passaged Oka strain live attenuated varicella vaccine in healthy children in 1997. Now, we conducted this two-year follow-up study to confirm the maintenance of immunity, the occurrence of natural varicella infection and the activation of vaccine induced latent infection on the same vaccine. Methods : 99 children who had been immunized by 47 passaged Oka strain live attenuated varicella vaccine in 1997 were followed up by questionnaire, and 46 children out of study group were followed up serologically. They were asked to report any instance of varicella or herpes zoster since they had been immunized. If there was any evidence of varicella or herpes zoster, they should be clinically or serologically confirmed by doctor. Also, those patients' parents were asked to report any instance of varicella or herpes zoster in their family, playmate, kindergarten, school, or other settings. The immunity to VZV was confirmed by EIA and FAMA test. Results : 6 recipients developed breakthrough varicella after exposure to VZV in family, kindergarten and school during follow-up period. However, clinical features of those patients were very mild and self limited without therapy. And none of the recipients developed herpes zoster during this observation period. The results of EIA test showed that study subjects were all seropositive except one, and the antibody titers and GMT of FAMA test were seropositively maintained in all subjects. Statistically, the antibody titers of EIA and FAMA test confirmed two years after vaccination were higher than those results confirmed one month after vaccination. Conclusion : Our study results suggest that the immunity of 47 passaged Oka strain live attenuated varicella is well maintained until 2 years later after vaccination, and mild natural infection after exposure to VZV can be occurred with low rate. There were not developing zoster in study vaccine after vaccination for two-years.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.217-227
• /
• 1993

Preadjusted appliance, following the original concept of the Andrews Straight-Wire appliance, became increasingly common in the 1980s. In six phases of treatment, anchorage control, leveling and aligning, overbite control, overjet reduction, space closure, and finishing are very effective with using the preadjusted appliances. Space closure is the phase of treatment in which the difference between standard edgewise and preadjusted mechanics is most noticeable. Orthodontists have been able to reduce the use of closing loops and, because of the level slot lineup, enjoy the advantages of sliding mechanics. In 1990, Dr. John C. Bennett and Richard P. McLaughlin introduced the new space closure system, namely, elastic 'tiebacks'. They found an $.019'\times.025'$ working archwire most effective in an .022'-slot system. Hooks of .024' stainless steel or .028' brass wire are soldered to the upper and lower archwires. The force required for space closure is delivered by elastic 'tiebacks'. An elastic modulo stretched by 2-3mm(to twice its normal length) usually delivers 0.5-1.5mm of space closure per month. Group movement and sliding mechanics are combined for gentle, controlled space closure, so that about 0.5mm of incisor retraction and 0.5mm of mesial molar movement can be seen each month. The tiebacks are replaced every four to six weeks. By using the elastic 'tiebacks', the next two cases were treated during space closure. Even though we found some clinical problems of this mechanics, long treatment time, hard to control of vertical dimension and anchorage, the application method of this system is so simple that orthodontists can manage many patients during short chair time. But we must apply this mechanics after perfect understanding of the biomechanics in tooth movement.

• Korean Journal of Microbiology
• /
• v.53 no.1
• /
• pp.1-8
• /
• 2017

Measles virus is a highly contagious, exanthematic virus, preventable by the use of an effective live-attenuated vaccine. However, measles virus remains endemic in many area of the world causing nearly 200,000 deaths per year and still a major cause of child mortality, mostly in developing countries. In March 2014, Republic of Korea was certified as a 'national measles elimination' by the WHO as a result of a high-quality case-based surveillance system and population immunity, which was achieved by a high vaccination rate (>95.0% since 1996). But, since the beginning of 2014, the Gyeonggi province has experienced a resurgence of measles cases. In this study, we investigated the characteristics of measles viruses isolated from confirmed measles in Gyeonggi province during January 1, 2014 ~ July 31, 2014, 60 isolates were obtained from 72 confirmed measles specimens. Genotypic distributions and genetic diversities of isolated measles virus were analyzed by sequencing of nucleoprotein (N) gene. 58 (96.7%) imported cases were identified. The predominant genotype was B3, which reflects the circulating measles virus in adjacent countries. The sequences of nucleoprotein (N) gene of isolated MeV were showed that the strains characterized showed the highest degree of identity (99%) with the Philippine related strains in 2013-2014. Therefore, infected traveler returning from the Philippines transmitted secondary infection in Korea.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.55-60
• /
• 2002

Purpose : To assess the change in the number of mechanoreceptors of posterior cruciate ligament(PCL) after transecting posterior cruciate ligament of the rabbit. Materials and Methods : We selected 10 skeletally-matured New Zealand white rabbits and one of the two posterior cruciate ligaments was transected and the other underwent sham-operation on each rabbit. Afterward, PCLs with synovium were obtained at femoral attach area in both knees in 20 weeks postoperatively, but in one of the cases, the transected PCL did not heal and had to be excluded from this study. Consequently, histologic examination of the ligament for the remaining 9 cases was done after being prepared with modified gold chloride stain. Results : The study showed a little bit more decrease in the number of mechanoreceptors in the transected group compared with that in the sham-operated group, but the number was statistically negligible. Conclusions : It is considered that the knee joint with injured PCL may still maintain proprioception since the decrease in the number of mechanoreceptors is not considerable, but further study on biomechanical role and function of mechanoreceptor of healed PCL is required.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.47-61
• /
• 2004

Although the purpose of orthodontic treatment is to increase the function and esthetics of the jaws along with increasing stability, there are many side effects during the treatment itself, such as root resorption and alveolar bone resorption. Such resorption of the apical root Is unpredictable, and may even proceed into the dentin layer. Once the process has begun, it is irreversible. By evaluating the effect of many oral habits, especially that of nail biting, in correlation with the root and the periodontal tissues, the appropriate biomechanics for orthodontic treatment can be taken into consideration, along with the possibility of root resorption and alveolar bone loss during orthodontic treatment, and any legal problems that might occur. Among the male and female patients of the ages $10\~15$ without skeletal deformity, 63 were chosen as the experiment group with known nail biting habits at time of examination, and within the same age group without nail biting habits as the control. After the orthodontic treatment, number of the experiment group was 31 and the control group was 22. The periapical radiographies of anterior teeth were taken and the assesment of the root length and alveolar bone level were taken before(T1) and after(T2) the orthodontic treatment. The results from this study were as follows : 1. Before the orthodontic treatment, average crown-to-root ratio of the experimental group showed noticeably high values in 4 maxillary incisors and mandibular right central incisor. 2. Before the orthodontic treatment, comparing the root length, maxillary and mandibular right central incisors and both mandibular incisors had a smaller value in the experimental group. 3. Before the orthodontic treatment, comparing and evaluating the alveolar bone loss measured from the cemento-enamel junction to the alveolar bone crest, some crestal bone of the experiment group showed greater loss than the control. 4. After the orthodontic treatment, there was shortening of the root length and loss of the crestal bone in both groups. 5. After the orthodontic treatment, the changes of C/R ratio and the shortening of root length were significantly high in the experimental group. 6. After the orthodontic treatment, the level of alveolar crestal bone showed greater loss in the experimental group.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.171-181
• /
• 2007

Objective: The present study was aimed at an analytical formulation of the micro-implant related torque as a function of implant size, i.e. the diameter and length, screw size, and the bony resistance at the implant to bone interface. Methods: The resistance at the implant to cancellous bone interface $(S_{can})$ was assumed to be in the range of 1.0-2.5 MPa. Micro-implant model of Absoanchor (Dentos Inc. Daegu, Korea) was used in the course of the analysis. Results: The results showed that the torque was a strong function of diameter, length, and the screw height. As the diameter increased and as the screw size decreased, the torque index decreased. However the strength index was a different function of the implant and bone factors. The whole Absoanchor implant models were within the safe region when the resistance at the implant/cancellous bone $(=S_{can})$ was 1.0 or less. Conclusion: For bone with $S_{can}$ of 1.5 MPa, the cervical diameter should be greater than 1.5 mm if micro-implant models of 12 mm long are to be placed. For $S_{can}$ of 2.0 MPa, micro-implant models of larger cervical diameter than 1.5 mm were found to be safe only if the endosseous length was less than 8 mm.