• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.231-239
• /
• 2000

This study was investigated to estimate optimal conditions and biological oxic denitrification to treat wastewater with low C/N ratio and high strength total inorganic nitrogen (TIN) concentration by using $A_2O$ fixed biofilm system. The lab-scale experimental system packed with media, which were composed of polyvinylidene chloride fiber (oxic basin) and ceramic ball (anaerobic and anoxic basin), was used. This system was operated with various influent alkalinities at the C/N(TOC/TIN) ratio of 0.5. The study results showed that TOC were removed over 96.0% at all operation conditions. The removal efficiencies over 93.5% for $NH_4{^+}-N$ and 81.8% for TIN were obtained at the alkalinity of about 1210mg/L(Run 5). Among the removal of TIN, 64.9% was occurred by biological denitrification at an oxic basin. It was confirmed through mass balance of alkalinity and nitrogen that the amount of alkalinity produced during biological denitrification at oxic basin was 2.49~3.46 mg Alkalinity/mg $NO_2{^-}-N$, ${\Delta}TOC/{\Delta}DEN$ of 0.34 (Run 5) was obtained at an oxic basin, which was less than the theoretical value of 1.22.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1400-1404
• /
• 2006

생물학적 질소, 인 제거 공정(이하 BNR)의 운전에 있어서 최적 유입수의 C/N(COD/TKN)비, SRT 및 온도의 범위 및 정량적 수치 등은 유기물 뿐 만아니라 질소, 인의 처리 효율에 있어서 매우 중요하다. 특히, 외국과 다른 저농도 유기물 특성을 보이는 국내 하수에 대해서는 BNR 공정의 선택과 설계 및 운전인자의 선별이 무엇보다도 중요한 역할을 한다. 본 연구에서는 IAWQ에서 제시한 ASM No.2d를 기초로 하여 만들어진 전산모형인 Envirosim사의 Biowin 프로그램을 시뮬레이션 도구로 활용하여, 국내 하수에 비교적 적용하기 용이한 A2/O 공정과 MUCT 공정에 대한 유기물, 질소 및 인처리 효율을 비교하고 유입수의 C/N와 SRT 및 온도에 따른 질소, 인 처리 특성과 유출수의 거동 등을 파악하였다. 시뮬레이션 결과, 국내 하수에서는 A2/O 보다는 MUCT 공정이 질소, 인 처리효율이 더 크게 나타났다. 온도와 SRT가 일정한 상태에서 C/N비는 7이상에서 TKN과 TP제거효율이 양호하게 나타났고, 온도와 C/N비를 일정한 조건에서는 SRT가 7일을 넘어서면 효율이 급격히 낮아지는 현상을 관찰할 수 있었다. 온도조건 실험에서는 $20^{\circ}C$이하, 특히 국내 하수처리장에 BNR 적용시 설게조건인 $13^{\circ}C$에 근접해서는 TKN의 제거효율은 급격히 떨어지는 반면에 인 제거효율이 상승하는 것으로 나타났다.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.355-361
• /
• 2006

In this study, effects of influent C/N(COD/Nitrate) ratio and dissolved oxygen(DO) concentration on biological nitrate removal from groundwater were investigated in the fixed-type biofilter. Influent nitrate of 30 mg/L was removed completely by biological denitrification at the C/N ratio of 10 and 4.0, while residual nitrate of 5 mg/L occurred at the C/N ratio of 2.0, which resulted from deficiency of organic electron donor. Furthermore, nitrite was accumulated up to about 5 mg/L as the C/N ratio decreased to 2.0. Increase in DO concentration also inhibited denitrification activity at the relatively high C/N ratio of 5.0, which decreased the nitrate removal efficiency. Although the influent DO concentration was reduced as low as 0.3 mg/L using sodium sulfite($Na_2SO_3$), effluent nitrite was up to 3.6 mg/L. On the other hand, nitrate was completely removed without detection of nitrite at the DO concentration of 0.3 mg/L using nitrogen gas($N_2$) sparging. The organic matter for denitrification in biofilter were in the range from 3.0 to $3.5gSCOD/g{NO_3}^--N$, while utilized these values increased at the high DO concentration of 5.5 mg/L. In addition to the high DO concentration and the low influent C/N ratio, DO control by chemical such as sodium sulfite affected on biological denitrification, which resulted in the reduction of nitrate removal efficiency and nitrite build-up in a biofilter.

• Journal of Wetlands Research
• /
• v.23 no.1
• /
• pp.60-66
• /
• 2021

As the concentration of nitrogen in the sewage flowing into the sewage treatment plant increases due to urbanization and industrialization, the degree of adverse effects such as eutrophication and toxicity to the aquatic ecosystem is also increasing. In order to treat sewage containing high concentration of nitrogen, various studies on the biological nitrogen removal process are being conducted. Existing biological nitrogen removal processes require significant costs for supplying oxygen and supplementing external carbon sources. In this respect, as a high-level nitrogen removal process with economic improvement is required, an anaerobic ammonium oxidation process (ANAMMOX), which is more efficient and economical than the existing nitrification and denitrification processes, has been proposed. The purpose of this study is to confirm the stability of the ANAMMOX process in the water treatment process and to derive the ratio of ammonia nitrogen (NH4+) to nitrite nitrogen (NO2-) for the implementation of the mainstream ANAMMOX process. A laboratory-scale Mainstream ANAMMOX reactor was operated by applying the ratio calculated based on the substrate ratio suggested in the previous study. In the initial range, the removal efficiency of NH4+ was 58~86%, and the average removal efficiency was 70%. In the advanced range, the removal efficiency of NH4+ was 94~99%, and the average removal efficiency was 95%. As a result of the study, as the NH4+/NO2- ratio increased, the stability of the mainstream ANAMMOX process was secured, and it was confirmed that the NH4+ removal efficiency and the total nitrogen (TN) removal efficiency increased. As a result, the results of this study are expected to be used as basic data in the application of the ANAMMOX process in the mainstream.

• Environmental engineer
• /
• v.18 s.193
• /
• pp.28-32
• /
• 2002

하$\cdot$폐수처리시설의 설계에서 컴퓨터 모델링을 사용하는 목적은 처리공정을 최적화 하기 위함이다. 기존의 하$\cdot$폐수처리장을 생물학적 질소$\cdot$인 제거 (이하 BNR) 시설로 개조하거나 신설 BNR 공정을 설계하려면 계획 시설에 대한 타당성 조사를 수행해야 하는데, 여러가지 처리공법을 분석하여 처리공정을 선정하고 선정된 공정의 성능과 운영방법, 그리고 시설비용 및 운영비용을

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.35-44
• /
• 1986

This paper is a basic study of the experimental results for the treatment of ammonia-nitrogen in the septic tank effluent. The substrates in this experiment are actual septic tank effluent and synthetic waste-water which is similar to septic tank effluent containing a considerable amount of nitrogenous component. Experiments were conducted for organic removal and nitrification using various recycle ratio and hydraulic retention time at each stage. The results obtained show that organic removal rate was above 80% in the 1st and 2nd stage, but as nitrification process was proceeded, above 90% of ammonia-nitrogen was removed in the 3rd and 4th stage. In these cases, the recycle ratio and HRT were found 30 and 7 hrs respectively. In the relation of $NH_4{^+}-N$ removal to $NO_3{^-}-N$ formation in the synthetic waste-water and septic tank effluent, when $1mg/{\ell}$ of $NH_4{^+}-N$ was removed, $NO_3{^-}-N$ formations were $0.95mg/{\ell}$ and $0.82mg/{\ell}$ respectively. And kinetics of nitrification using Biological Fluidized Bed was discussed also.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.324-325
• /
• 2001

총 암모니아성 질소(TAN)은고밀도 양식에서 한계요소로 작용하는 수질인자 중의 하나이다. 생물학적 암모니아 처리공정의 효율적인 설계를 위해서는 생물반응기의 암모니아 제거속도식을 구하여 처리시스템의 최적 용량을 구하여야 한다. 그러나 현재까지 진행된 고정화 미생물을 이용한 암모니아 제거공정에 대한 연구는 고정화 재질의 특성이나 장치의 운전효율에 대한 것으로 속도식에 대한 연구는 부족하다. (중략)

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.237-243
• /
• 2013

This study aims to examine the modified $A^2/O$ process is useful to reduce the environmental pollution caused by nutrient in wastewater. Specific results are as follows: The removal rate was evaluated at each time period, ie., 18h, 8h, 6h, and 3h after the reaction started. The anoxic rate was more than 94-97% from 18h to 6h but was less than 50% before 6h. Thus, the test of nitrification was done using 6h as the optimal anoxic retention time and the aerobic retention time set at 24h. When the flow change was 1:1, the average ammonia concentration inputted was $30mg/{\ell}$. Returned top nitric acid solution and the concentration of ammonia solution falling into the anoxic reactor was about 50％ of the initial concentration, and the flow change was 1:2, the concentration of ammonia falling into the anoxic reactor was about 62% of that of influxed ammonia. And the results of this study showed that the nitrogen removal rate can be improved by inputting untreated nitric acid and changing the flow of top nitrate solution using the modified $A^2/O$ method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.421-421
• /
• 2021

도시화, 산업화로 인해 하수처리장 유입하수 내 질소 농도가 증가하면서 그에 따른 부영양화 발생, 수생태계에 독성을 미치는 등의 악영향 또한 증가하게 되었다. 하수 내 고농도 질소를 처리하기 위해 1990년 초 연구가 시작되어 현재 보편적으로 사용되고 있는 생물학적 질소 제거 공정은 산소공급과 외부탄소원 보충 과정에서 상당한 비용이 소요된다. 이와 같은 문제점이 대두됨에 따라 고도의 질소 제거 공정이 요구되면서, 경제적으로 개선이 이루어져 기존의 질산화·탈질 공정보다 효율적인 혐기성 암모늄 산화 공정(ANaerobic AMMonium OXidation, ANAMMOX)이 제안되었다. ANAMMOX 공정은 혐기성 조건 아래 전자공여체와 전자수용체로써 암모니아성 질소와 아질산성 질소를 이용해 질소가스 형태로 질소를 제거하는 공정이다. 질산화·탈질 공정과 비교했을 때, 폭기과정에서의 산소요구량 감소, 외부탄소원 불필요, 질소 제거 과정 단축 등의 장점을 가진다. 본 연구는 수처리공정에서의 ANAMMOX 공정의 적용 가능성을 확인하고, 암모니아성 질소대비 아질산성 질소 비율에 따른 Mainstream ANAMMOX 공정의 효율 비교를 통해 공정의 안정성과 높은 제거효율을 확보할 수 있는 NH₄⁺ 대비 NO₂^- 비율을 도출하는데 목적이 있다. 실험실 규모의 Mainstream ANAMMOX 반응조에 적용한 비율은 선행연구를 비롯한 화학양론식에서 제시된 비율을 바탕으로 산정하였다. 1.00부터 1.30의 전체적인 비율을 Initial과 Advanced 2개의 구간으로 나누어 운전한 결과, 각 구간의 NH₄⁺ 제거효율은 각각 58~86%, 94~99%였다. NH₄⁺ 대비 NO₂^- 비율이 증가함에 따라 공정의 안정성이 확보되고, NH₄⁺ 및 총질소(TN) 제거효율이 증가하는 경향이 나타났다. 본 연구의 결과는 수처리공정에서의 안정적인 ANAMMOX 공정 적용을 유도하고, ANAMMOX 공정의 성능개선을 도모하는 연구의 기초로 활용될 수 있다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1999.04a
• /
• pp.224-225
• /
• 1999