• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.52-58
• /
• 2009

A low voltage, low power delta-sigma modulator is proposed for cardiac pacemaker applications. A cascade of delta-sigma modulator stages that employ a feedforward topology has been used to implement a high-resolution oversampling ADC under the low supply. An inverter-based switched-capacitor circuit technique is used for low-voltage operation and ultra-low power consumption. An experimental prototype of the proposed circuit has been implemented in a $0.35-{\mu}m$ CMOS process, and it achieves 61-dB SNDR, 63-dB SNR, and 65-dB DR for a 120-Hz signal bandwidth at 7.6-kHz sampling frequency. The power consumption is only 280 nW at 1-V power supply.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.51-59
• /
• 2006

In this paper, we propose an excellent ultrasonic transceiver system based on a QPSK modulation technique for underwater communication. The transmitter sends a still image at the level of 187dB re $1{\mu}Pa/V@1m$ through a power amplifier by driving an ultrasonic sensor. The receiver performs digital conversion at the 100kHz sampling frequency, demodulation and decoding process for the image sent from the transmitter through the underwater communication. We have shown that the processed image at the receiver is almost the same as the orignal one. The maximum detection distance of the system proposed in this paper is approximately 1.17km. To cope with the difficulties of transmission loss, this paper proposes, implements and analyzes important parameters of sensors and circuits used in the system. Most of the underwater communication has focused on the transmission of audio signal, but this paper suggests an efficient underwater communication system for still image transmission.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.133-140
• /
• 2002

In this paper, the structure of integrated navigation computer for experiment is proposed. It is designed for considering the real time processing and data storage capacity. It will be used in missile, aircraft, submarine system and experimental vehicle. The I/O device supports IMU, GPS, odometer, altimeter, depth sensor, inclinometer etc. And the main storage device uses the tape device. That can improve the system stability. Therefore it can be used in a high dynamic or shock environment. The embedded linux is used as an Operating System. For the real time capability, sensor data processing and algorithm processing units are seperated. The time synchronization is referenced by IMU data.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.419-431
• /
• 2000

In this paper, a new beamforming technique is proposed, which can completely eliminate all the artifacts caused by digital scan converter. In the proposed method, named display-pixel-based focusing(DPBF) by the authors, ultrasound waves are focused directly at the display pixels instead of sampling points on the polar coordinate. Consequently. the DPBF system does not require the digital scan converter. To verify the proposed method, we modified a commercial scanner and performed experiments with a 3.5 MHz convex array and a 7.5 MHz linear array. We also defined and measured ICRA/B(Image Coarseness Ratio) to compare the image quality quantitatively. The experimental results with in vivo and in vitro data show that the proposed method improves the ICRA/B considerably, resulting in much smoother and finer images.

• Journal of Korean Society on Water Environment
• /
• v.33 no.2
• /
• pp.170-180
• /
• 2017

The study used jet water flow, ultra-sonication and ozonation system units to investigate impact of the unit components on water quality of stagnant Yeo-cheon River reach, Korea. Samples were collected at six locations, before operation and after 1, 3 and 6 hrs of operation. By operating the water flow unit only, dissolved oxygen increased as high as 90% after 3 hr at 25 m downstream of the device and Chl-a was reduced by 80%. Incorporating sonication, greater than 80% of Chl-a was removed even at 100 m distance from the device. Besides, total dissolved phosphorus was reduced from an average value of $420({\pm}70){\mu}g/L$ before ultrasonic irradiation to $160({\pm}40){\mu}g/L$ after the treatment. Releasing ozone into the flow with sonication, Chl-a was considerably removed from the water column and ammonia nitrogen was also decreased to average value of $20{\mu}g/L$ from $60{\mu}g/L$. However, as only $3{\ast}10^{-3}mg/L$ of ozone was used for safety purpose and due to brief reaction time it takes, effect of integrating ozone to the system covered limited area. Generally, combining sonication to jet flow is promising in preventing algal bloom formation since it has effectively removed Chl-a from the water column.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.928-931
• /
• 2018

고립된 해상 작업 환경에서의 작업자의 건강상태 관리와 혹시 모를 추락탐지는 작업자의 안전을 위해 매우 중요하다. 본 논문에서는 이러한 고립공간 작업자의 안전을 모니터링하기 위한 헬멧에 부착할 수 있는 IoT 시스템을 위한 알고리즘을 제안한다. 이는 장치가 작업 중에 긴급 상황인지 신속하게 판단할 수 있다. 스마트폰은 누구나 들고 다니기 때문에 사용자 환경은 스마트폰을 이용하여 적용되었다. 작업자들이 착용할 용도이기 때문에 PPG 센서는 불편하지 않도록 귀에 부착한다. PPG 센서를 단독으로 사용하여 스트레스 정도를 파악한다. 3축 가속도 센서는 헬멧에 부착되고 추락을 감지하는데 사용된다. 우리는 여러 센서와 블루투스 통신을 이용하여 발전된 센서 시스템을 만든다. 또한, 우리는 3축 가속도 샘플을 분석하고 정규화하는 알고리즘을 JAVA에서 구현하였다. 스마트 폰을 사용하는 이점은 신호 처리를 위해 별도의 마이크로프로세서(mcu)가 필요하지 않으며 내부 통신 시스템을 통해 제어 센터에 정보를 전송할 수 있다는 것이다.

• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.327-333
• /
• 1997

We designed and constructed the high frequency magnetic characteristics measurement system to measure core loss, B-H curve, permeability of toroidal ferrite core, amorphous core and various materials for high frequency application. The system consists of universal equipments such as digitizing oscilloscope, signal generator, power amplifier, PC in order to make upgrade easily. The power source is composed of waveform synthesizer and power amplifier ranging from DC to 20 MHz, and output signal H and B from sample core are digitized by oscilloscope with sampling rate 1 GS/ s per channel. Computer controls power source and oscilloscope, reads data from oscilloscope, displays analyzed waveform and saves data with file. The entire procedures finishes within few seconds.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.618-625
• /
• 2005

This paper has achieved that an optimal design and experiments of heater and cathode of electron gun that serve to embody high current density in CRT display. For the high brightness, high resolution and larger size in CRT display, high current density of electron gun is indispensible. An Impregnation style cathode is used, and must heighten operating temperature of heater to get high current density for this, it is proportional hereupon and power dissipation increases. In this paper, to get low power cathode with high current density, There are produced and tested sample that differ lead type of heater, coating method, the pitch and number of winding of the first and second coiling in the heat emission area for the low power design of high current density cathode heater in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.245-247
• /
• 2022

Backscattered x-ray imaging is a technology capable of acquiring an image inside an irradiated object by measuring X-rays scattered from an object. For image acquisition, the system must include an X-ray generator and a detection system for measuring scattered x-rays. The imaging device must acquire a real-time signal at sampling intervals for x-rays generated by passing through a high-speed rotating collimator, and for this purpose, a high-speed signal acquisition device is required. We developed a high-speed multi-channel signal acquisition device for converting and transmitting signals generated by the sensor unit composed of a large-area plastic scintillator and a photomultiplier tube. The developed detector is a system capable of acquiring signals at intervals of at least 15u seconds and converting and transmitting signals of up to 6 channels. And a system includes remote control functions such as high voltage, signal gain, and low level discrimination for individual calibration of each sensor. Currently, we are conducting an application test for image acquisition under various conditions.

• Journal of Broadcast Engineering
• /
• v.14 no.5
• /
• pp.638-649
• /
• 2009

Image resizing (or scaling) is one of the most essential issues for the success of visual service because image data has to be adapted to the variety of display features. For 2D imaging, the image scaling is generally accomplished by 2D image re-sampling (i.e., up-/down-sampling). However, when it comes to stereoscopic 3D images, 2D re-sampling methods are inadequate because additional consideration on the third dimension of depth is not incorporated. Practically, stereoscopic 3D image scaling is process with left/right images, not stereoscopic 3D image itself, because the left/right Images are only tangible data. In this paper, we analyze stereoscopic 3D image scaling from two aspects: geometrical deformation and frequency-domain aliasing. A number of 3D displays are available in the market and they have various screen dimensions. As we have more varieties of the displays, efficient stereoscopic 3D image scaling is becoming more emphasized. We present the recommendations for the 3D scaling from the geometric analysis and propose a disparity-adaptive filter for anti-aliasing which could occur during the image scaling process.