• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.379-385
• /
• 2018

This study examined the condition of degraded plastic artifacts and conducted materials assessments for conservation treatment. The properties and bond characteristics of five types of adhesives(EVA, PVAc, Cyanoacrylate) were evaluated to select the adhesive most suitable for conservation treatment. The degradation of plastic artifacts caused cracks, peelings, and surface warping. According to the FT-IR analysis, the synthetic resin used in the artifact was estimated to EVA type. The properties of the adhesives were evaluated through acidity, and hardness measurements. The results showed that acidity varies with the type of adhesive, and that the hardness of PVAc was higher than those of EVA. On comparing the bond characteristics of the samples after artificial degradation, it was found that PVAc and Cyanoacrylate increased the chromaticity and hardness of the samples, while EVA was the most stable with relatively little change. Thus, EVA was confirmed to be the most suitable materials for conservation treatment of degraded plastic artifacts. In this study, as the experiment of treatment materials based on actual artifact, it is expected that it could be used a basis research for conservation treatment of plastic artifacts.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.18-25
• /
• 2017

Purpose: The aim of this study was to evaluate the effect of two types of coloring agents and the number of application on the color of zirconia. Materials and methods: Monolithic zirconia specimens ($15.7mm{\times}15.7mm{\times}2.0mm$) (n = 33) was prepared and divided into 11 groups. Each experimental group was coded as a1-a5, w1-w5 according to the type of coloring agent and number of application. Specimens with no coloring agent applied were set as control group. The color difference of specimen was measured by using double-beam spectrophotometer, and calculated color difference (${{\Delta}E^*}_{ab}$), translucency parameter (TP). All data was analyzed with two-way ANOVA, multiple comparison $Sch{\acute{e}}ffe$ test, Pearson correlation and linear regression analysis. Results: As the number of application increased, values of $CIE\;L^*$ was decreased, but values of $CIE\;b^*$ was increased in both coloring agents. However, there was no significant difference on values of translucency parameter. The color difference range of each group was ${0.87{\Delta}E^*}_{ab}$ to ${9.43{\Delta}E^*}_{ab}$. Conclusion: In this study, type of coloring agent and the number of application did not affect the color difference of zirconia.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1314-1320
• /
• 2011

Vacuum drying was conducted for a steamed pumpkin-sweet potato slab to improve its quality, convenience and preference as snack. Steamed sweet potato was dried from 30 to $60^{\circ}C$ for 12 hr, after which moisture contents, colors, and taste were evaluated. The lowest moisture content was 0.22% upon vacuum drying at $60^{\circ}C$ for 12 hr. Lightness decreased while other color values (a, b and ${\Delta}E$) increased with increasing drying temperature and drying time. Reducing sugar and soluble solid contents ranged from 98.7~268.11 mg/g and $19{\sim}72^{\circ}Brix$, respectively. Sensory score of the sample was the highest when dried at $50^{\circ}C$ for 6 hr. The optimum drying conditions were predicted to be $48.5{\sim}62^{\circ}C$ and 5.1~7.1 hr by response surface methodology.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.74-83
• /
• 2017

This study was conducted to obtain the optimal conditions of hot air drying for Cudrania tricuspidata by response surface methodology (RSM). The independent variables were blanching time (60, 120, 240 sec), drying temperature (40, 60, $80^{\circ}C$) and drying time (12, 24, 36 h). The dependant variables were total polyphenol content (TPC), total flavonoid content (TFC), DPPH radical scavenging activity (DPPH), and color difference (${\Delta}E$). Viable cell colony was counted according to changes of blanching time. It was confirmed that microorganisms gradually decreased with increasing blanching time. From RSM results, the predicted values of TPC, TFC, DPPH, and ${\Delta}E$ were 8.62 mg GAE/g, 56.65 mg RE/g, 40.26% and 11.69, respectively. Experimental values within the optimal range (240 sec, blanching time; $60^{\circ}C$, drying temperature; 24 h, drying time) were 10.06 mg GAE/g, 49 mg RE/g, 44.99% and 10.53, respectively. The predicted values were similar to the experimental values. Comparing drying tendency according to changes of blanching time, moisture reduction was bigger in the blanched sample than that in control at $40^{\circ}C$. However, the differences between blanched and control decreased with increase of drying temperature. Viable cell gradually decreased as increasing blanching time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.163-170
• /
• 1992

Color of kimchi juice was measured instrumentally to evaluate the quality of Korean cabbage kimchi during fermentation at 4$^{\circ}C$ and 16$^{\circ}C$ . These results were compared with those of chemical analyses of kimchi juice and sensory evaluation for kimchi. Chemiral analyses and sensory evaluation showed that the kimchi has reached pH 4.3, the pH value under an optimum ripening period, after 3-days fermentation at 16$^{\circ}C$ with almost the highest contents of vitamin C and carotenoids as well as desirable sour taste and texture. At 4$^{\circ}C$ the kimchi was unripened after 6-days fermentation. At 16$^{\circ}C$, $L^{*}$ value of kimchi juice did not show any significant change during fermentation periods. However, $a^{*}$ value increased until day 4$^{\circ}C$ and thereafter decreased sharply. $b^{*}$ value increased until day 3 and then showed no change. High correlations were seen between volume of kimchi juice, pH, total acidity and $L^{*}$or $b^{*}$ value, and between carotenoid content and $a^{*}$ value, respectively. It was desirable to use color $a^{*}$ or $b^{*}$ value of kimchi juice to evaluate the quality of kimchi. The kimchi was under an over-ripening period when $a^{*}$ value was equal to or lower than the initial value, or when $b^{*}$ value was almost constant. Predicting an optimum ripening period was possible by using a proportional value of $a^{*/}$ $b^{*}$ , i.e., unripening period, 1 $\geq$ and near 1 ; optimum ripening period, near 0.8 ; over-ripening period, < 0.8.eriod, < 0.8.d, < 0.8.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.316-323
• /
• 2018

This study aimed to analyze the effect of packaging gas type on the quality characteristics of dried persimmon during a 60-day storage period. The samples were stored at 10 and $-10^{\circ}C$. Experimental samples were either untreated (CON) or packed with carbon dioxide ($CO_2$), nitrogen ($N_2$), or argon (Ar) gases. In terms of the CIE $a^*$ (redness) and $b^*$ (yellowness) values, the least changes were observed in the Ar package. The color difference observed in the $N_2$ package was found to be the highest at $-10^{\circ}C$. Ar and $CO_2$ packages showed the highest and lowest water content, respectively, at $10^{\circ}C$. Sensory evaluation showed a high score for Ar packages. At $10^{\circ}C$, the score of the Ar package was the highest until day 40 and that of the $CO_2$ package was the highest from day 40 to 60. At $-10^{\circ}C$, the score of the Ar package was the highest. These results show that $N_2$- and Ar-modified packaging is the most desirable, thus suggesting its application in actual market.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.616-624
• /
• 2010

We compared the physicochemical properties of, and volatile components in various commercial fruit vinegars (made from apples, grapes, and persimmons). Total acidity was highest in grape vinegars. Significant between-sample differences were evident in total and reducing sugar contents. Brownness, turbidity, and overall color difference (the ${\Delta}E$ value) were highest in persimmon vinegars. Free sugars were composed mainly of fructose, glucose, sucrose, and maltose. Major organic acids were present in the (descending abundance) order acetic acid, oxalic acid, citric acid, malic acid, and succinic acid, among-samples difference were negligible. Nine-essential free amino acids were detected in nine types of grape and persimmon vinegars, and in six varieties of apple vinegar. Among 17 types of volatile compounds identified in apple vinegars, 12 in grape vinegars, and 33 in persimmon vinegars, the main volatile components were acetic acid, ethyl acetate, isoamyl acetate, isovaleric acid, isoamyl alcohol, propanoic acid and phenethyl acetate. Volatile chemicals in commercial fruit vinegars were effectively analyzed using a SAW e-nose.

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.989-996
• /
• 2022

Some flowers have high sensual appealability due to their unique shapes, colors, smells, and tastes. Such edible flowers receive social attention as a noble ingredient of functional teas. In this study, methanol extracts of 23 commercial flower teas (CFTs) were prepared, and their color differences were compared. No tar color pigments were detected in the 23 CFT. The average content of total polyphenol of the 23 CFTs was 80.2±50.92 mg/g and the extracts of jin-dal-rae (Rhododendron mucronulatum Turcz), mae-hwa (Prunus mume), mae-mil (Fagopyrum esculentum), mok-ryun (Magnolia kobus), and sal-gu (Prunus armeniaca var. ansu Maxim) flowers showed total polyphenol contents greater than 150 mg/g. The average content of total sugar of the 23 CFTs was 187.4±166.5 mg/g and the extracts of chamomile (Chamaemelum nobile), kuk-hwa (Chrysanthemum morifolium), dong-baek (Camellia japonica L.), and won-chu-ri (Hemerocallis fulva) flowers showed total sugar contents greater than 400 mg/g. Among the 23 CFTs, the extract of jang-mi (Rosa hybrida hortorum) flower has prominent anti-thrombosis activity, and the extracts of dal-ma-ji (Oenothera lamarckiana), dong-baek, hibiscus (Hibiscus syriacus), and mae-mil flowers showed strong inhibitions against thrombin and blood coagulation factors. Also, the extracts of jang-mi, kum-jan-hwa (Tagetes erecta L.), mae-mil, mok-ryun dong-baek, and jin-dal-rae flower showed strong radical scavenging activities against DPPH, ABTS, and nitrite and reducing power. Our results suggest that the flowers of jang-mi, mae-mil, and dong-baek can be developed as promising anti-thrombosis treatments.

• Korean Journal of Food Science and Technology
• /
• v.47 no.6
• /
• pp.757-764
• /
• 2015

Red ginseng was treated by subcritical water extraction (SWE) whose two parameters were the extraction temperature ($105-150^{\circ}C$) and time (5-20 min) under a high pressure. The oBrix value, solid content, color difference, and turbidity of the red ginseng extract increased with increasing extraction time and temperature, while the pH decreased. The total concentration of ginsenosides in the red ginseng extract was maximal at $120^{\circ}C$ and 20 min. The concentrations of ginsenosides Rg3 and Rh1 were maximal at $150^{\circ}C$ and 15 min. The concentrations of Rg3 and Rh1 were respectively 3.5-5 times and 2-2.5 times higher than those treated by conventional extraction methods with hot water, ethanol, and methanol. SWE is a particularly effective method for the selective extraction of less-polar ginsenosides such as Rg3 which is well known to exert strong anticancer effects.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.109-120
• /
• 2004

INTRODUCTION: The build-up method has been used for application of porcelain powder on the metal framework to make final tooth shape conventionally. This method takes time and need skill to mimic final shade and shape of porcelain fused to metal crown. The purpose of this study was to develop standard shape and shade laminating porcelain forms to reduce build-up time. METHODS: To make tooth form porcelain paste, several liquid organic compounds were added to conventional feldspathic porcelain. The amount of additives and rheologic property were tested to find out best composition. Comparison of mixing methods to reduced porosity, proper heating schedule, and measurement of shrinkage amount and residual organic materials were performed to set-up standard procedures. Finally, biaxial flexural strength and color of preformed laminated paste porcelain were compared with those of porcelain which fabricated by the conventional build-up method. RESULTS: There was no significant difference in physical properties and color stability between two fabrication methods after various testing methods. Conclusion: This new build-up method can be applied to fabricate the PFM crown and bridge without any loss of strength and optical properties.