• The monthly packaging world
• /
• s.172
• /
• pp.61-65
• /
• 2007

디스플레이용 PET필름 시장이 활황을 띌 것으로 보인다. 디스플레이용 PET필름은 확산.보호.반사 필름, 프리즘시트 등 LCD 광학필름의 원재료 격으로 국내 시장(세계약 40% 추정)은 LCD TV 등의 확산에 힘입어 올해 약 32% 정도의 고성장이 예상되고 있다. 그동안 포장재.비디오테이프∙전자부품 등 범용 PET필름 생산에 주력했던 SKC.코오롱.도레이새한 등 주요 화학.섬유 업체들이 LCD광학필름 제조에 필요한 디스플레이용 PET 필름의 생산 인프라를 확대하거나 새롭게 구축하기 시작한 것이다. 특히 그동안 기존 범용 PET 필름 생산라인의 일부를 이용해 생산했던 방식에서 탈피해 디스플레이 전용 라인을 신설, 향후 지속적인 수요확대에 대응한다는 전략을 구체화하고 있어 주목된다. 본 고에서는 (사)한국포장협회 회원사를 대상으로 조사한 내용을 바탕으로 업체별 PET 및 Nylon 시장을 살펴보도록 하겠다.

• Journal of Powder Materials
• /
• v.29 no.2
• /
• pp.123-131
• /
• 2022

The purpose of this study is to improve the mechanical properties and develop manufacturing technology through self-soluble alloy powder flame spray coating on the surface of a run-out table roller for hot rolling. The roller surface of the run-out table should maintain high hardness at high temperatures and possess high wear, corrosion, and heat resistances. In addition, sufficient bonding strength between the thermal spray coating layer and base material, which would prevent the peel-off of the coating layer, is also an important factor. In this study, the most suitable powder and process for roll manufacturing technology are determined through the initial selection of commercial alloy powder for roll manufacturing, hardness, component analysis, and bond strength analysis of the powder and thermal spray coating layer according to the powder.

• Journal of Mushroom
• /
• v.19 no.4
• /
• pp.336-340
• /
• 2021

The cleaved amplified polymorphic sequence (CAPS) marker uses a restriction enzyme recognition site resulting from single nucleotide polymorphisms and insertions and deletions on the DNA sequence. This technique does not require expensive equipment, the process is simple, and clear results can be obtained reliably. In this study, Agaricus bisporus cultivars SaeA, SaeDo, SaeHan, SaeYeon, SaeJeong, Dodam, Seolgang, Dahyang, Hogam, and Hadam developed in Korea were discriminated using four CAPS markers. Our results indicated that it is possible to distinguish the ten cultivars and determine the genetic diversity among them.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.31-42
• /
• 2024

This review paper provides a detailed analysis of PET (polyethylene terephthalate) bottle recycling in Japan. Japan is a global leader in PET bottle recycling due to its advanced regulatory framework and proactive industry initiatives. Japan's success attributes to the widespread adoption of bottle-to-bottle recycling, driven by the beverage industry's commitment to sustainability. By utilizing post-consumer PET bottle recovery and food-grade mechanical recycling technologies, Japan has achieved significant milestones in PET bottle recycling. This paper examines regulatory frameworks, collection systems, reprocessing facilities, and food safety assessments to highlight Japan's innovative approaches to PET bottle recycling and their impact on global sustainability efforts. Drawing parallels with Korea's early stages of PET recycling, it suggests involving major beverage companies and re-evaluating regulations to promote bottle-to-bottle recycling. The focus is on the implications for Korea to promote circular economy principles in plastic recycling.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.111-120
• /
• 2020

Despite the recent economic contraction caused by the Corona 19 incident, interest in the residential environment is growing as more people live at home due to the increase in telecommuting, thereby increasing demand for remodeling. In addition, the government's real estate policy is also expected to have a visible impact on the sales of the interior and furniture industries as it shifts from regulatory policy to the expansion of housing supply. Accurate demand forecasting is a problem directly related to inventory management, and a good demand forecast can reduce logistics and inventory costs due to overproduction by eliminating the need to have unnecessary inventory. However, it is a difficult problem to predict accurate demand because external factors such as constantly changing economic trends, market trends, and social issues must be taken into account. In this study, LSTM model and 1D-CNN model were compared and analyzed by artificial intelligence-based time series analysis method to produce reliable results for manufacturers producing furniture components.

• Membrane Journal
• /
• v.13 no.1
• /
• pp.9-19
• /
• 2003

Membrane process was investigated to recover process water and valuable gold from washing water of electroless PCB plating processes. The filtration experiments were carried out using not only a RO membrane test cell to determine suitable membrane for washing water but also spiral wound membrane modules of nanofiltration and reverse osmosis for scale-up. At first, RO-TL(tap water, low pressure), RO-BL(brackish water, low pressure) and RO-normal(for water purifier) sheet membranes made by Saehan Co. were tested, and the performance of RO-TL membrane showed most suitable f3r recovery of soft etching, catalyst and Ni washing waters. As a result of RO test cell, the experiments for scale-up were carried out using RO-TL modules far water purifier at 7bar and $25^{\circ}C $The permeate flux fur Au washing water was about 30 LMH, but Au rejection was less than 80%. The permeate fluxes for Pd, Ni and soft etching washing water were about 22, 17 and 10 LMH, respectively. The Pd, Ni and Cu rejections showed more than 85, 97 and 98% respectively. The nanofiltration module for water purifier was introduced to recover Au selectively from Au, Ni and Cu ions in Au washing water. Most of Ni and Cu ions in the feed washing water were removed, and only Au ion was existed 81.9% in the permeate. Furthermore, Au ion in the permeate was concentrated and recovered by RO-TL membrane module. Finally, Au was also able to recover effectively by using 4 inch diameter spiral wound modules of NF and RO-TL membranes, in series.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.297-302
• /
• 2020

Five varieties of mushrooms, including Sae-do, were examined using farm field tests to determine their morphological characteristics and quality by performing harvest flush. Considering the cultivation characteristics of the varieties studied, the parts related to mushroom generation and production showed almost similar characteristics. Overall, the mycelial forces were similar; however, in the evaluation of plantation tests performed by farmers, "saedo" was found to be the strongest and "saehan" was considered to be the weakest. Weights of fruiting bodies were related more for compost status and regimen of use than for breeding, and it was difficult to distinguish between the weights of fruiting bodies of the varieties studied. Regardless of the variety, pileus diameter, pileus thickness, and stem length of Dalseong-gun, Yongin-si, and Boryeong-si decreased as the harvest flush progressed. However, stem thickness tended to increase in the second and third flush compared to that in the first flush, regardless of the variety. However, the Gyeongju-si farms could not identify any trends attributable to varieties and harvest flushes. The pileus size and stem length of the fruiting bodies of varieties from Buyeo farms decreased with the progression of the harvest flush. However, pileus thickness and stem thickness did not show any specific tendency of growth among the varieties studied. The differences in the morphological characteristics of mushroom varieties in each harvest cycle are expected to be caused by differences in the supply of nutrients in the medium, the quality of the compost used, and the cultivation environment rather than the variety.