• The Journal of Society for e-Business Studies
• /
• v.16 no.2
• /
• pp.39-71
• /
• 2011

Lately, developing systems fully interoperable with others is considered an essential element for successful projects, as not only do e-commerce becomes ubiquitous but also distributed systems' paradigm spreads. However, since definitions of interoperability vary by viewpoints, it is still difficult to have the same understanding and evaluation criteria on interoperability. For instance, various interoperability parties in military use different definitions of interoperability, and its T&E is not conducted according to the definition, but only to levels of information exchange. In this paper, we proposed a new definition of interoperability as followsm First of all, we collected existing and various interoperability definitions, extracting key components in each of them. Second, we statistically analyzed those components and applied the association rules discovery in data mining. We compared existing interoperability definitions to ours. From this research, we found associations among the components from various definitions applying market-basketanalysis, redefining interoperability. Key findings of this research can contribute to a unified viewpoint on the definition, level, and evaluation items of interoperability.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.39-53
• /
• 1991

디지탈 기기를 포함한 일반적인 전기전자기기로 부터 발생하는 방해전자파는, 낮은 주파수 대역(MF, HF 대역)에서는 전원성 등의 도선을 따라서 전달(전도성 방해파)되고, 높은 주파수 대역(VHF, UHF 대역)에서는 직접 공간에 방사(방사성 방해파)된다. 이러한 전도성 및 방사성 방해파의 측정은 IEC, CISPR, FCC, VDE 등의 규격이 정하고 있는 규정에 따라서 실시된다. 이들 규격은 방해파 측정법을 규정하고 있을 뿐만 아니라, 재현성이 좋은 측정을 실현시키기 위해 측정용 시설에 대해서도 자세하게 규정하고 있다. 방사성 방해파의 측정에 사용하는 측정시설로서는, 기본적으로 야외시험장(Open Area Test Site, OATS)을 사용하도록 규정하고 있는데, 측정치의 상호연관성을 위해서는 규약에 정해진 적합성이 평 가되고 확인되어 있어야만 한다. 여기서는 방사성 방해파 측정용 시설중에서 가장 기본적이고도 중요한 야외시험장의 적합성 평가 파 라미터 - 두 지점간의 전송손실, 이를 시험장감쇠량 이라함 - 에 대하여 기술하기로 한다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.6
• /
• pp.41-49
• /
• 2009

Poor compaction of subgrade soil causes low stiffness and bearing capacity of sublayers so that faulting and differential settlements can be generated between new and old pavement surfaces in case of widening works. However, investigation of verifying the reason of producing the defects in the pavements are not performed in detail. In this study, several in-field tests including PMT and PBT were performed for obtaining stiffness of the sublayers in new and old pavements respectively of an widening project. Then, based on the obtained stiffness values and the measured deformations obtained by specially designed tilt meters, the main reasons of generating different deformations between the old and new pavement sections and the relationship between the deformation and stiffness are verified.

• Journal of the KSME
• /
• v.28 no.1
• /
• pp.28-36
• /
• 1988

차량 주행특성을 규명하기 위한 연구방법에 대한 일반적 고찰을 토대로 주요 개방회로시험과 관련 평가기준들이 소개되었다. 그러나, 차량의 주행상 안전도 연구를 위한 종합적인 척도는 이제까지 설명된 평가기준들로부터 아직 명확히 귀결지을 수 없음을 강조하여야 한다. 이유로 서는, 한편으로 응용되어진 연구방법들이 실제 교통사고 발생상황을 포괄하기에는 아직 불충분 하며, 또 한편으로는 주어진 한 시험방법에서 주행안전도 판정을 위해 제기된 특성치가 절대적인 값으로 확정지을 수 없기 때문이다. 따라서 전체 시스템 '운전자-차량-환경'에 있어서 주행특 성의 완전한 평가를 내리기 위해서는, 객관적으로 서술될 수 있는 차량의 주행특성-안정성 및 조절성과 운전자에 의한 주관적인 판별 또한 환경요소에 의한 영향들에 대하여 상호 연관관계가 복합적으로 해석. 규명되어져야만 할 것이다.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.233-245
• /
• 2009

Availability of pressuremeter test for evaluation of geotechnical properties of foundation soil into which guardrail post is to be installed is investigated in this study. First, an analysis method of the post based on the pressuremeter test is proposed that can obtain bending moment and load-deformation profiles of the post. Then static horizontal load test onto a small scale guardrail post is performed in order to get bearing capacity and load-deformation pattern of the model post. The obtained results are compared with the load-deformation curves and bearing capacity of the post obtained from the pressuremeter method. In addition horizontal impact test to the post is performed using a model bogie car in order to check failure pattern around the model foundation and to investigate dynamic bearing capacity due to deceleration and inertia force of the soil. It is verified that the pressuremeter test is so useful and reasonal technique to analyze road foundation-post interaction.

• Food Science and Industry
• /
• v.40 no.1
• /
• pp.27-35
• /
• 2007

측정불확도란 시험결과에 대하여 측정량을 합리적으로 추정한 값들의 분산 특성을 나타내는 파라미터(parameter)로써 ILAC(국제시험소인정협력체) 등의 국제기구와의 측정결과에 대한상호인정 및 신뢰성 확보에 필수적인 요소이다. 국제표준(ISO/IEC 17025)에 맞는 시험분석 결과의 도출을 위해서는 먼저 소급성을 유지하고 그에 따른 불확도를 산출하여야 한다. 소급성은 실험의 모든 과정에 불확도를 가지고 끊기지 않는 비교연결을 통한 국제(국가)표준과 연관시키는 시스템으로, sampling에서 측정결과의 도출까지 소급성을 유지하는 것만이 측정결과의 신뢰성(정확 및 정밀)을 유지하는 최상의 시스템이다. Guide to the Expression of Uncertainty in Measurements(GUM)에 의한 불확도 계산 절차는 측정량(measurand)의 함수 표현, 입력량의 표준불확도(standard uncertainty)의 계산(표준편차, 평균의 표준편차), 합성표준불확도(combined uncertainty)의 계산, 확장불확도(expanded uncertainty)의 계산을 통한 통계적 추정을 하는 것이다. 오렌지 쥬스 중 카드뮴을 분석함에 있어서, 실험실에 대해서는 국제표준화(ISO17025) 시스템을 도입하고 분석시약 및 기기에 대하여 소급성을 유지하여, 분석결과의 신뢰성을 확보하기 위한 측정불확도를 산출하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1029-1033
• /
• 2006

During operation of generator, the excitation force with 120Hz always exist irrespective of No. of poles. Therefore the vibration is generated in the stator end windings and the micro-crack is grown up inside the bars. After all, coolant water is leaked outside the bars or the stator is moved and is worn out. What is more, one bar is touched with another bar so a short circuit may frequently happen in operation. In order to prevent it from occurring, the evaluation of mechanical integrity for generator stator windings is carried out periodically during overhaul period. This help troublesome end windings to complement with insulation material and to change vibration characteristics. In this paper, the evaluation of mechanical integrity for generator stator windings is described and the change of vibration characteristics is analysed.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.222-229
• /
• 2007

Environmental tests should be carried out to show that design performance is in an operational condition in an actual operational environment to assure maintainability and reliability. Aero-products electromagnetic compatibility tests are performed mainly for the individual parts and Specifications MIL-STD-461E and RTCA DO-160E are developed for the military and commercial parts tests respectively. The MIL-STD-461E which is a military environmental test standard is targeting all munitions and that user can apply by selecting applicable requirements from this specification. On the other hand, requirements are applied exclusively for the Avionics Equipments in commercial test standard.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1C
• /
• pp.19-27
• /
• 2011

This paper evaluates the applicability of wave-based nondestructive methodologies and a penetration test for compaction quality measurements during road construction. To evaluate the physical and mechanical properties of compacted subgrade soil layers, soil stiffness gauge (SSG), time domain reflectometry (TDR), and miniature electro-mechanical systems (MEMS) accelerometers were used to nondestructively evaluate the soil response during and after compaction and dynamic cone penetrometer (DCP) profiles were used to evaluate the soil shear strength after compaction was completed. At the field site, two types of soils were compacted with four different compaction equipments and energies. Field testing results indicate that soil parameters evaluated by different testing methods, which are SSG, TDR, MEMS accelerometer, and DCP, are highly correlated. In addition, it is shown that the physical and mechanical tests deployed in this study can be used as alternative methods to the conventional compaction quality evaluation methods when assessing the overall quality and the engineering response of compacted lifts.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.909-914
• /
• 2000

반응금속 침투법으로 제조한 $Al_2$O$_3$/Al 복합체의 파괴특성과 손상 내구성을 침투방향성에 따라 관찰하였으며, 복합체는 $Al_2$O$_3$단일상보다 향상된 파괴인성과 Al 단일상보다 높은 경도값을 나타내었다. Vickers 압입법을 사용한 복합체의 손상형태에서는 침투방향에 따른 각각의 미세구조에 의해 상이한 특성을 나타내었으며, 헤르찌안 압입법을 사용한 복합체의 손상거동은 $Al_2$O$_3$과 Al의 중간거동을 나타내었다. 헤르찌안 압입 후 강도저하시험으로 복합체가 갖는 우수한 결함저항성을 관찰할 수 있었으며, 높은 헤르찌안 하중에서는 복합체의 강도저하 특성이 복합체의 미세구조에 의존함을 관찰할 수 있었다. 이와 함께 복합체에서의 반응금속 침투방향성, 미세구조 그리고 손상 내구성 사이 상호연관성에 대해 논의하였다.