• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.120-133
• /
• 1994

홀로그래픽 간섭계측기로터 나오는 영상 데이터를 해석하는 전문가시스템에 대하여 기술하였다. 그동안 간섭 띠무늬(fringe)를 해석하는 방법들이 어느 정도의 자동화를 이룩하며 개발되어왔다. 그러나, 복잡한 간섭 띠무늬 패턴(fringe pattern)및 심한 잡음이 생기게 되는 고속도 항공공학 분야 또는 실험기계공학 분야에서는 신뢰할 만한 자동화를 이룩하기가 매우 힘들었다. 현재 사용가능한 방법중에는 간섭띠무늬 추적, 위상전이, 푸리에 변환, 회귀분석 등이 있는데, 이들은 소음제거나 데이터 수정을 하는데 있어서 극히 국부적인 정보에만 의존하였다. 결과적으로, 특별히 심한 소음이 있는 경우, 부정확한 위상중첩이나 간섭띠무늬 순차배열문제에 부딪히게 되고 따라서 작업자의 수작업이 심각하게 필요하게 된다. 본 논문에서는 간섭띠무늬 추적방법의 자동화 를 위한 새롭고 포괄적인, 규칙기반 전문가시스템에 대하여 기술하였다. 새로 개발된 전문가 시스템은 간섭띠무늬 패턴에 대한 전체적인 또는 지연적인 정보를 추출해 내고 또 전문가가 가지고 있는 지식을 이용한다. 이 전문가 시스템은 저수준 및 고수준 처리를 동시에 할 수 있도록 상호연결기구를 채택하여 간섭띠무늬를 해석하는 적절한 해결책을 마련하였다. 또한 위상전이나 푸리에 변환 방법에서 문제가 되는 자동위상 중첩에 대해 개발된 전문가 시스템의 응용의 가능성에 대해서도 기술하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.173-178
• /
• 2011

In this paper, we analyze the total performance according to transmit probability of interfering transmitter in hetero systems. We analyze this criteria as a parameter for co-use when hetero systems share the same frequency channels. In order to make an analysis of relationship between transmit probability and performances of two systems. We take into consideration on the case that WLAN is a victim receiver and WiBro is an interfering transmitter. Analyzed coexistence results may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.109-115
• /
• 1998

This paper describes the development of a 6-component load cell with plate beams which may be used to measure forces Fx, Fy, Fz and moments Mx, My, Mz simultaneously in industry. We have analyzed the bending strains on the surface of the beams under forces or moments by using Finite Element Method and designed the sensing elements of 6-component load cell. We have also determined the attachment location of strain gages of each load cell and fabricated 6-component load cell. To evaluate the rated strain and interference error of each load cell, we have carried out characteristic test of 6-component load cell.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.873-882
• /
• 1990

본 연구에서는 작은 크랙이 중앙 크랙선단 주위에 대칭으로 배치 분포되어 있 는 유한 평판의 경우에 대한 것으로, 우선 균일분포하중을 받는 정방형판에 분포크랙 이 있는 경우 분포크랙의 위치에 따른 중앙 크랙 선단에서의 응력확대계수의 변화를 유한요소법으로 해석하여 등응력확대계수 곡선들로 나타냈다. 그리고 크랙들 사이의 상호 간섭에 의해 일어나는 소성영역도 고려하여 그 안정성을 검토하여 보았는데, 특 히 크랙들이 서로 가까와 지면 그 크랙들 간에 상호간섭이 커져 소성영격이 크랙선단 주위에 크게 발생되므로써 크랙들은 쉽게 연결되고 합체로 인한 크랙성장이 되어 파괴 됨을 예측할 수 있고 중앙 크랙선단 주위의 분포크랙의 위치에 따른 소성영역 변화도 유한요소법으로 해석하여 도식적으로 나타냈다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.222-232
• /
• 1999

This paper describes the development of a precision 3-component load cell with plate beams which may be used for measuring forces Fx, Fy and moment Mz simultaneously in industry. We have derived equations to predict the bending strains on the surface of the beams under forces or moment. We have also determined the attachment location of strain gages of each sensor and fabricated 3-component load cell. To evaluate the rated strain and interference error of each sensor, we have carried out characteristic test of precision 3-component load cell. It reveals that the rated strain calculated from the derived equations are good agreement with the results from Finite Element Method analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.771-780
• /
• 2010

This paper describes the design process of a six-component force/torque (F/T) sensor. The new six-component F/T sensor having leaf spring ends has been developed using a cross beam structure as the basic sensing element. Fundamental strain analysis of both ends fixed beam having a leaf spring structure is performed by finite element analysis. In order to obtain similar output sensing strains from the six component loads and minimize coupling strains, the optimal location of strain gages is determined and the strain gages are connected so that the bridge circuits with four strain gages would be balanced. Using leaf spring ends instead of rigid fixed ends, remarkable increment in output sensing strain can be achieved for two component forces. Several modifications in design result in a similar sensing strain of approximately $400\;{\mu}m/m$ for the six-component forces and moments, and a reduced coupling strain of $0\;{\mu}m/m$ between the forces and moments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.37-42
• /
• 2012

In this paper, we analyze the maximum allowable transmitting output level of transmitter, which meets the required interference probability, in order to get the method that different communication systems can be existed and used simultaneously in adjacent channels. We analyze the performance result according to various density of interfering transmitter and transmitter output in hetero systems. In order to get the relationship with between density of interfering transmitter and transmitter output, we consider WiBro as an interfering transmitter, WLAN as a victim receiver and Extended Hata and IEEE 802.11 model as a channel environment respectively. Analyzed coexistence results may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1995-2003
• /
• 1999

Since the cross-correlation function which is due to communication channel distortion or interference is not orthogonal, near far problem and multi-user interference are generated in the DS-CDMA system. Those problems degrade performance of the system so that the efficient algorithm to suppress the interference in the DS-CDMA system is required. In this paper, a blind adaptive interference suppressor using constant modulus algorithm is proposed. Simulation results present that the gain of SIR for the blind adaptive receiver is about 7[dB] at steady state over Gaussian channel in forward channel. The gain of noise to interference ration is about 4[dB] over Rayleigh fading channel, is about 11[dB] over multipath channels. Thus the proposed receiver has higher performance than a conventional receiver in the DS-CDMA system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.463-465
• /
• 2022

The high-intensity focused ultrasound device intermittently operates abnormally due to communication signal interference between the devices during use due to the high frequency radiated during the skin treatment procedure. Communication interference between multi-frequency ultrasound devices can be reduced through CAN communication controller and transceiver design, firmware S/W program and CAN communication module development.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.823-828
• /
• 2009

A small UHF RFID tag antenna for a key-chain installed inside of a metallic key-management cabinet has been designed. The tag antenna has been designed as small size as $66\;mm{\times}6\;mm$ with consideration of coupling among the tag antennas and metallic parts of key-chain and cabinet. The tag antenna is fabricated with a meander line dipole using T-matching method with FR-4 substrate. One tag antenna has been designed with consideration of coupling of adjacent tag antennas, and the other has been designed for the location close to the metallic part in the cabinet. The characteristics of tag antennas and reading distance have been analyzed based on the different numbers of adjacent tag antennas. As a results, the 360 tag antennas installed in the cabinet have been successfully recognized.