• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1045-1053
• /
• 2013

In this paper, we propose a new power-saving mechanism (PSM) for Long-Term Evolution (LTE) systems by considering a round-trip delay between a user equipment (UE) and its correspondence node. The proposed PSM changes the order of the operational procedures of the legacy LTE PSM by taking the traffic arrival pattern suffering the round-trip delay into account. After modeling the round-trip delay, we numerically analyze the proposed PSM with respect to energy consumption and buffering delay. Then, we characterize these performances by employing a simple energy-delay tradeoff (EDT) curve according to the operational parameters. The resulting EDT curve clearly shows that the proposed PSM outperforms the legacy LTE PSM in terms of both the energy consumption and buffering delay.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.923-928
• /
• 2008

Pyrotechnic shock or pyroshock is characterized as a transient vibration phenomenon which shows large acceleration and high frequency range up to 10kHz during the operation of separation devices where explosives are used. During the flight of a launch vehicle, pyroshock is mainly generated at several events such as satellite separation, fairing separation and stage separation. In this paper, wiremesh isolators are introduced and several types of isolators are manufactured for the performance tests. For the investigation of typical characteristics of wiremesh isolators, compressive loading tests are basically performed and pyroshock tests are accomplished to confirm pyroshock isolation ability of each wiremesh isolator by using 4Kg dummy mass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.704-704
• /
• 2013

CIGS 박막 태양전지는 I-III-VI족 화합물 반도체로서 직접천이형 에너지 밴드 구조를 가지고 있고, $1{\times}10$ cm의 높은 흡수계수를 가지고 있으며, Ga, Ag, Al을 첨가함으로써 밴드갭을 1~2.7 eV 넓은 범위로 조절가능하다. 본 연구의 목적은 Sputtering 방식과 Cracker cell을 이용한 실험으로 보다 효율적인 방식으로 CIGS 전구체 조성별 특성에 따른 구조와 전기적, 광학적 특성의 효과에 대하여 조사하였다. Cu-In-Ga 전구체는 CuGa(80-20 at.%)과 In(99.0%) target을 사용하여, Sputtering 공정으로 증착하였으며, Cracker cell이 부착된 RTP (rapid thermal processing)를 통하여 셀렌화를 진행하였다. Reservoir zone 온도는 320도, Cracking zone 온도는 900도로 유지하였으며, 진공상태에서 Se이 공급되면서 열처리가 진행되었다.Cu-In-Ga 전구체 구조에서 In의 증착시간을 변화시켜 CIGS 박막에 미치는 영향에 대해 분석하였다. 이때 기판온도는 $500^{\circ}C$로 고정하거나, $240^{\circ}C$ 열처리 후 $500^{\circ}C$에서 열처리하는 두가지를 적용하여 그 영향을 분석하였다. 또한 Selenium이 Cracking zone 온도와 열처리 시간에 따라 미치는 영향의 변화를 조사하였다. 이에 따른 CIGS 박막의 전기적 특성의 변화를 조사하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.79-84
• /
• 1991

The rice plants (Oryza sativa L.) established from the shattered grains by combine harvesting at the previous year showed great variations of yield and yield components from site to site at the abandoned rice crop field. The cultural condition was very similar to direct seeding under no-tillage system but no cultural practices such as application of fertilizer, weed control, irrigation and drainage had been carried out. The highest yield of 188kg/10a was observed at one of the quadrats randomly located on the field, which showed the possibility of exploitation of no-tillage system. The interrelationship between crop growth and coverage of weed species was measured by calculating the correlation coefficients. The investigations of how to establish sufficient number of seedlings per unit area, plant succession on the abandoned crop field, crop mixture with legume crops, and breeding appropriate plant type of rice for the enhancement of competitive ability would be required for the success of no-tillage system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.285-290
• /
• 2008

Pyrotechnic shock or pyroshock is characterized as a transient vibration phenomena which shows large acceleration and high frequency range up to 10kHz during the operation of separation devices where explosives are used. During the flight of a launch vehicle, pyro-shock is mainly generated at several events such as satellite separation, fairing separation and stage separation. In this paper, characteristics of pyroshock are introduced briefly, and PEEK washer shock absorber is applied for the reduction of pyroshock in the high frequency range. With some electronic devices, reduction characteristic of pyroshock using washer type shock absorber are studied. Random vibration tests are also performed for the verification of vibrational characteristics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.59-59
• /
• 2002

램제트 추진기관은 압축과정을 별도의 부품 없이 형상에 의해서 감속하여 연소 압력비를 얻는다. 따라서 구동 마하수와 형상에 의해 흡입과정의 압축 효율이 결정된다. 설계점은 충분한 유량을 확보 할 수 있는 유량과 충격파 각을 조절하여 전압력 손실을 줄이도록 고려되어야 한다. 또한 연소가 일어나면 연소실 압력이 배압으로 작용하고 비행시에 받음각은 변하므로 이에 따른 성능 분석도 고려 되어야 할 사항이다. 본 연구는 국내에서 실험한 형상에 대해 수치계산을 수행하여 코드의 검증과 아울러 램제트 유동장의 수치적 시뮬레이션도 설계단계에서 하나의 도구로 이용할 수 있음을 보여준다. 실험에서는 배압 조건을 얻기 위해 유동 블록키지를 유로 내에 두어 상응하는 배압을 얻었지만 본 계산에서는 압력 경계조건을 직접 사용하였다. 유동이 비정상 특성을 가지므로 시간 정확도를 이차로 가지도록 이중시간 전진법을 사용하였다. 사용한 압력비는 충격파가 카울 끝에 닿는 임계상태에 가까운 12, 13, 14에 대해 계산을 수행하였고 부스터모드로 흡입구 끝이 막혀 있다가 램제트 모드로 바뀌어 연소실 압력이 위의 압력비라고 가정할 때의 비정상 천이 과정을 계산해 보았다. 본 계산은 흡입구 부분만을 떼어놓고 적절한 가정 하에 수행되었지만 연소실 내부도 비정상 특성을 가지므로 흡입구와 연소실을 동시에 같이 계산해야한다. 추후에 전체적인 계산을 진행하기 위한 전 단계로 흡입구 계산만을 수행하여 실험과 잘 일치하는 계산 결과를 얻었고 전체 계산을 위한 연구는 진행 중에 있다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.75-81
• /
• 2004

Because geological types and land cover conditions of Imha basin have a very weak characteristics to soil erosion, most soil particles (low into river and bring about high density turbidity in Imha reservoir when it rains a lot. This study used GIS-based RUSLE model and analyzed soil erosion to make basic data for the countermeasures of turbidity reduction in Imha reservoir. Total soil erosion amounts was evaluated as 5,782,829 ton/yr using rainfall data(2003) and especially Dongbu-basin was extracted as most source area or soil erosion among Imha sub-basin. Also it was evaluated that soil erosion amount by RUSLE model was suitable by applying turbidity survey data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.111-118
• /
• 2014

This paper presents an efficient Markov feature extraction method for detecting splicing forged images. The Markov states used in our method are composed of the difference between DCT coefficients in the adjacent blocks. Various first-order Markov state transition probabilities are extracted as features for splicing detection. In addition, we propose a feature reduction algorithm by analysing the distribution of the Markov probability. After training the extracted feature vectors using the SVM classifier, we determine whether the presence of the image splicing forgery. Experimental results verify that the proposed method shows good detection performance with a smaller number of features compared to existing methods.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.707-713
• /
• 1997

HVPE(hydride vapor phase epitaxy)법으로 (111)MgAI$_{2}$ $O_{4}$기판위에 GaN 후막을 성장하였다. GaN를 성장하기 전에 기판에 표면을 GaCI로 처리한 수 성장하였을 때 이중 X선 회절 피크의 반치폭이 710 arcsec로서 N $H_{3}$로 처리한 후 성장한 GaN에 비하여 작았으며, 무색 투명의 경면상태가 얻어\ulcorner다. 113$0^{\circ}C$의 온도에서 성장한 GaN 의 광루미네센스(PL)특성과 동일하게 나타났다. 10K의 온도에서 측정된 PL 스펙트럼은 자유여기자와 속박여기자의 재결합천이에 의한 피크들과 Mg과 관련된 도너-억셉터 쌍 사이의 재결합 및 이의 1LO, 2LO, 3LO 및 4 LO 포논복제에 의한 피크들이 나타났다. 성장된 GaN는 n형의 전도성을나타내었으며, 캐리어 이동도와 농도는 각각 21.3$\textrm{cm}^2$/V ㆍsec와 4.2 x $10^{18}$$cm^{-3}$이었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.790-797
• /
• 2006

IEEE 802.16e specifies two different power saving modes(PSM). One is sleep mode and the other is idle mode. These modes are different in that whether a mobile node maintains its state information with the serving base station or not. This difference results in different efficiency in consuming battery power of a mobile terminal. Therefore, it becomes important to analyze the performance of each power saving mode considering the parameters affecting the power consumption. In this paper, we propose a performance modeling framework of sleep mode and idle mode in terms of power saving efficiency. The analytical results are verified by computer simulations that idle mode is superior to sleep mode in power consumption of mobile node.