• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.195-202
• /
• 1994

In this research, a lot of triaxial test results (CID) are analyzed to study the curvature characteristics of failure envelope of sand and parametric relationship between shear strength and state parameter by Been and Jefferies. In the conventional triaxial tests, correction for the change of sectional area of a sample and for membrane influence is essential especially in order to determine critical state (or steady state) condition more correctly. Based on the test results, a model to express the shear strength of fine sand as a function of density and stress level is presented and curvature characteristics of shear failure envelope and parametric relationship between state parameter and shear strength parameters are evaluated.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.5-14
• /
• 2010

Recent researches on the behavior of gravelly soils have been focused mainly on the relative density or on the gravel content. And some researchers presented the liquefaction behavior based on the relative density whereas others based on the gravel content of gravelly soil. However the relative densities vary with gravel content and relative density is not enough to fully express the behavior of gravelly soils. Therefore in this research state parameter which considers void ratio and effective confining pressure is introduced and Steady State Line(SSL) of gravelly soils for various gravel content are determined by undrained triaxial tests in order to express the behavior of gravelly soils. From the research the position of SSL moved downward with gravel content. And the same density of soil showed dense sand behavior or loose sand behavior depending upon the confining pressure. Especially relative density 80% of gravelly soil showed loose sand behavior under high confining pressure. However the gravelly soils with similar state parameters showed similar stress behaviors. It can bee seen that state parameter is useful tool to evaluate undrained behavior of gravelly soils. Also state parameter and undrained strength showed good correlations.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.77-92
• /
• 2003

A set of standard triaxial testing was performed to identify underlying physical processes and inherent limitations in the determination of critical state parameters in sandy soils. The experimental test results showed that the critical state friction angle for a given soil is constant regardless of drainage condition while the critical state line on the e-log p'space is significantly affected by drainage condition mainly because of insufficient strain attained in standard triaxial tests and strain localization effects in udrained tests. It appeared that the best method to determine critical state parameters in laboratory testing is to use homogeneous loose specimens under drained shear condition. In addition, a reference state parameter was suggested to design tests that will avoid dilatancy or strain localization effects in drained tests.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.61-75
• /
• 2003

Comprehensive review on the determination of critical state parameters in sandy soils from standard triaxial testing was performed to facilitate the application of critical state soil mechanics to the shear behavior of sandy soils. First, semantic differences in literature were clarified, inferring that critical state should be considered as the ultimate state at large deformation. Second, the characteristics of critical state parameters were discussed, and also the uniqueness of critical state line and the sensitivity of quasi-steady state condition were verified in relation to initial state, fabric, loading condition, and drainage condition. Third, as an example, the critical state soil mechanics was applied to evaluate the post-liquefaction shear strength, i.e. the reliable ultimate shear strength in liquified soils, in terms of critical state parameters.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.4
• /
• pp.27-36
• /
• 2010

In this study, a series of flat dilatometer tests are performed for Busan sand reconstituted in a large calibration chamber to evaluate the state parameter ($\Psi$). Experimental result shows that the horizontal amplification factor ($K_D/K_0$) is linearly related with state parameter in semi-logarithmic space, but the $K_D/K_0$ of OC specimen is smaller than that of NC specimen because of the horizontal residual stress by stress history of OC specimen. The relation between the normalized dilatometer modulus ($E_D/\sigma_m'$) and the state parameter is also linearly expressed in semi-logarithmic space, and the effect of stress history is relatively insignificant in this relation. However, the variation in $E_D/\sigma_m'-\Psi$ relation of NC state is slightly higher than that of OC state due to the effect of the stress level, and the correlation curve is descending with increase of confining stress. The comparison of test result with previous results of Ticino and Toyoura sands shows that the $E_D/\sigma_m'-\Psi$ relation of Toyoura sand is located on upper side than that of Busan and Tieino sands due to the effect of the higher compressibility, whereas the $K_D/K_0-\Psi$ relation of each sand is irregularly distributed.

• 전기의세계
• /
• v.9
• /
• pp.4-10
• /
• 1962

Relay Servo제어계의 특이한 성질의 하나로, 다른 비선형계에섣 그렇지만 외부의 동작에 의한 것이 아니고, 제어계 자체내의 조건에서 계속적으로 주기적운동, 즉 자려주기진동(Sustained Oscillation)이 발생하는 경우가 있다. 제어계가 자려진동의 상태에 있을 때 그 진폭 및 각주파수는 각 부분의 요소에 의하여 결정되고 고유한 값을 가지게 된다. 이러한 상태는 선형제어계의 입장에서 보며는 불안정상태이나, Relay제어계에서는 이 주기진동이 제어량의 일정목표치에 대한 비율이 미리 규정지은 요구조건에 비하여 실제상 허용할 수 있는 정도면 제어계는 안정하다고 할 수 있다. Relay Servo계의 안정, 불안정은 Describing함수의 방법에 의하여 Nyquist, Attnuation-phase Margin Criteria를 사용하여 Kochenburger, Johnson의 연구에서 규정지었다. Relay-Servo자려진동상태는 제어계의 Gain정수 중에서도 그 종류에 따라 각주파수 및 진폭에 미치는 영향이 달라진다. 본문은 위에 설명한 상태를 알아내기 위하여 간단한 Raly위치제어계를 구성하고 Gain정수를 변화시키면서 자려진동의 각주파수 및 진폭의 변화를 계산하고 기록계의 측정치와 비교검토하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.82-88
• /
• 2001

This paper considers the problem of the identification of the time invariant parameters of distributed systems. In general, the parameters are identified by using the CBPOM(Conventional Block Pulse Operational Matrices), but in this paper, the parameters ard identified by using the EBPOMS(Extended Block Pulse Operational Matrices) which can reduce the burden of operation md the volume of error caused by matrices multiplication. The simulation cloves the effectiveness of the proposed method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.215-215
• /
• 2022

현재 국내 정수시설은 정수공정별 감시제어-데이터수집시스템(SCADA: Supervisory Control And Data Acquisition)에 기반하여 감시제어 및 모니터링 위주로 운영·관리를 실시하고 있다. 또한, 주요 핵심 공정인 응집제 약품투입, 소독 및 여과 설비 공정의 운영방식에 있어서 선험적 운영지식에 의한 방식으로 운영되고 있기 때문에 지속적인 안정적 운영을 위해서는 표준적이고 체계적인 운영관리 수단이 필요하다. 국외에서는 다양한 운영 조건에 기반한 정수처리 효율을 예측할 수 있는 모의(simulation) 도구의 개발을 통해 기존 운영되고 있는 정수장의 효율을 예측하는 데 활용하고 있는 실정이다. 본 논문은 실시간 운영관리가 가능한 기반을 구축하여 정수처리의 효율을 예측할 수 있는 시뮬레이터 개발을 통해 정수처리 공정별 기본 및 조합의 공정 시뮬레이션 모의 모듈 기술을 개발하기 위한 연구를 수행하였다. 또한 개발된 기술의 실증 운영을 통해 검증된 모듈을 반영한 정수장 시뮬레이터 시스템을 개발을 위한 연구를 수행하였다. 정수장 시뮬레이터는 수질정보, 물질수지, 수두손실등의 운영현황 데이터를 수집하는 기능, 착수-혼화-응집-침전-여과-소독 등 개별 공정별 주요 운전변수의 모니터링 및 제어를 통한 운영관리 기능, 원수 수질변화에 신속한 대응을 위한 정수처리 공정제어 의사결정지원 기능, 그리고 온라인 관망해석을 포함한 정수처리 전(단위)공정 시뮬레이터 기능 및 공정별 운영인자 최적화 기능 등으로 구성되어 있다. 현재 운영 중인 정수장의 공정별 운전 상태를 평가·관리하여 정수공정 운영 안정화 체계를 확보하고, 정수장의 유량과 수질의 갑작스런 변화에 따른 모의를 통한 수질예측으로 실시간 정수장 최적운영관리가 가능하다. 또한 원수 성상에 따른 적정 공정운영 자동화로 운영비 절감 및 효율적 인력 활용으로 정수장 운영 효율성을 제고함으로써 지속적이고 안정적인 정수장 운영 체계를 확보할 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2C
• /
• pp.133-140
• /
• 2010

A series of triaxial test was performed in order to determine critical state parameters of calcareous Jeju sand, which comprises angular shape particles with many pores in the surface. It is observed that Jeju sand mainly shows the contractive behavior during triaxial shear due to high extreme void ratios and large compressibility. The peak friction angle of Jeju sand decreases slightly with increasing mean effective stress due to the particle crushing of carbonate materials. However, the peak friction angle of Jeju sand is higher than that of other silica sands because of the more angular particle shape. The critical state friction angle of Jeju sand gradually decreases when the mean effective stress at a critical state increases. Whereas, there is not a clear influence of void ratio on the critical state friction angle. Critical state parameters of Jeju sand are similar to those of calcareous sands, but significantly larger than those of common sands.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.123-131
• /
• 2007

A series of CIDC triaxial tests and cone penetration tests in calibration chamber were performed to investigate the relationship between state parameter and normalized cone resistance far dredged Busan sand. From the results of the triaxial tests, the critical state line of Busan sand was established, and the critical state parameters found to be $M=1.39(\phi_{cs}=34^{\circ}),\;\Gamma=1.07$ and $\lambda=0.068$. By analyzing the state parameters and corresponding cone resistances for calibration chamber specimens, the relationship between normalized cone resistance and state parameter for Busan sand was defined as $(q_c-p)/p'=27.6\exp(-10.9\Psi)$. This relationship was also shown to be independent of the stress history. From the comparison of the slope of the normalized cone resistance, m, and the normalized cone resistance at $\Psi=0$, $\kappa$, with those of various sandy soils from over the world, the relationship of m and $\kappa$ with $\lambda_{ss}$ of Busan sand was concluded to show a good agreement with the result published previously, while Busan sand had the largest $\kappa$ among the soils with similar $\lambda_{ss}$ values.