• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1155-1163
• /
• 2009

This paper proposes an automatic facial expression generation system of vector graphic character using gaussian process model. Proposed method extracts the main feature vectors from twenty-six facial data of character redefined based on Russell's internal emotion state. Also by using new gaussian process model, SGPLVM, we find low-dimensional feature data from extracted high-dimensional feature vectors, and learn probability distribution function (PDF). All parameters of PDF are estimated by maximization the likelihood of learned expression data, and these are used to select wanted facial expressions on two-dimensional space in real time. As a result of simulation, we confirm that proposed facial expression generation tool is working in the small facial expression datasets and can generate various facial expressions without prior knowledge about relation between facial expression and emotion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.524-524
• /
• 2023

하천 내 식생의 분포는 흐름저항의 증가와 수위상승에 큰 영향을 미치는 요소 중 하나이다. 동일한 단면정보를 가졌더라도 식생이 분포하는 하도는 식생이 없는 하도에 비해 흐름저항으로 인해 유속이 현저히 느려져 홍수위 상승을 유발하기 때문이다. 따라서 식생의 종류, 크기, 분포 형태, 잎의 밀도 등에 따라 흐름저항계수를 정량화하며 흐름을 정확히 예측하는 것이 필요하다. 본 연구에서는 2019년 한국건설기술연구원 하천실험센터에서 진행된 식생하도에 대한 실규모 실험의 조건과 지형정보를 HEC-RAS(Hydrologic Engineering Center's River Analysis System) 1차원 수치모형에 입력하고, 식생 패치의 분포를 고려한 Manning's n의 공간적 분포 및 적용방식에 따른 수면 경사 재현 정확도에 대한 민감도 분석을 수행하였다. 실험은 상단 폭 11 m, 경사 1:2(V:H)의 사다리꼴 단면을 가진 실규모 수로에서 70 m 길이의 구간을 대상으로 진행되었다. 실험 구간 내 6개의 압력식 수위계를 설치해 수위 측정 및 수면 경사 산정을 실행하였다. 실험 조건으로 적용된 인공 식생패치의 분포 및 밀도 조건은 3가지로 큰 패치와 작은 패치로 구성된 조밀한 조건, 단일 패치로 구성된 조밀한 조건, 단일 패치로 구성된 성긴 조건이었으며, 모두 정수(emergent)상태로 진행되었다. 적용된 패치의 형상은 내성천에서 조사된 자연 형태의 식생패치 형태를 참고하였으며, 버드나무 종을 모사하였다. 실험 조건에 따라 유량은 각각 평균 1.5 cms와 2.7 cms로 공급하였으며, 평균 수심은 약 1 m로 측정되었다. 위 실험 내용을 바탕으로 수치모의를 위한 경계조건과 지형정보를 수립하였으며 모의 케이스는 크게 두 가지로, 수로 내 식생의 분포를 종방향으로 고려한 케이스와 횡방향으로 고려하여 조도계수를 적용한 케이스로 분류하였다. 모의에 적용된 조도계수는 실험에서 획득한 데이터와 베르누이 방정식을 활용하여 산정되었으며, 두 케이스에 대한 모의 결과는 실험에서 관측된 수위와 비교하였다. 본 연구에 따르면 여러 개의 식생패치가 정수상태로 존재하는 하천에 대한 1차원 수치모의 시 식생의 분포를 종방향으로 고려하여 하나의 구간조도계수를 적용하는 방식이 종횡단면의 식생패치 위치를 고려한 조도계수를 세분화하여 적용하는 방식에 비해 수위 계산 정확도가 상대적으로 높은 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.933-943
• /
• 2019

The purpose of this study is to identify determinants for preferred funeral methods depending on socio-economic characteristics. In South Korea, the Act on Funeral Services, Etc. categorizes funeral methods into burial, inurnment, and natural burial. This study empirically analyzes how and what socio-economic characteristics affect choices among these three categories. Data is collected from Social Survey 2017 and funeral facilities in the country. The data to be analyzed is developed in terms of a hierarchy which puts the burial and cremation methods in an upper class and the inurnment and natural burial methods in a lower class. Based on this data, a nested logit model is employed to conduct empirical analysis. The analysis indicates that those characteristics that have a statistically significant influence on preferred methods include gender, age, householder, marriage, satisfaction with life, class awareness, monthly income, housing type, housing tenure type, and living in city area. Each variable's modulus of calculated direct and cross elasticity need to be used to analyze the outcome of a nested logit model. In this study, the modulus of direct and cross elasticity are determined for the significant variables. The calculated direct elasticity is applied to analyze the likelihood of choosing each funeral method when there are changes in the significant variables. When a particular method has been selected, on the other hand, the cross elasticity is utilized to analyze changes to the likelihood of choosing the other methods. One of the most notable results is related to natural burial. In order to meet the demand for natural burial, it is necessary to provide more burial sites and raise awareness of natural burial. This will facilitate the efficient use of national territorial space.

• Spatial Information Research
• /
• v.14 no.4 s.39
• /
• pp.363-377
• /
• 2006

Mean annual soil loss was calculated and critical soil erosion areas were identified for the Congaree River Basin in South Carolina, USA using the Revised Universal Soil Loss Equation (RUSLE) model. In the RUSLE model, the mean annual soil loss (A) can be calculated by multiplying rainfall-runoff erosivity (R), soil erodibility (K), slope length and steepness (LS), crop-management (C), and support practice (P) factors. The critical soil erosion areas can be identified as the areas with soil loss amounts (A) greater than the soil loss tolerance (T) factor More than 10% of the total area was identified as a critical soil erosion area. Among seven subwatersheds within the Congaree River Basin, the urban areas of the Congaree Creek and the Gills Creek subwatersheds as well as the agricultural area of the Cedar Creek subwatershed appeared to be exposed to the risk of severe soil loss. As a prototype model for examining future effect of human and/or nature-induced changes on soil erosion, the RUSLE model customized for the area was embedded into ESRI ArcGIS ArcMap 9.0 using Visual Basic for Applications. Using the embedded model, users can modify C, LS, and P-factor values for each subwatershed by changing conditions such as land cover, canopy type, ground cover type, slope, type of agriculture, and agricultural practice types. The result mean annual soil loss and critical soil erosion areas can be compared to the ones with existing conditions and used for further soil loss management for the area.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.151-171
• /
• 2023

For the efficient establishment of a channel strategy for banks, this study aims to propose a channel model by classifying channels into types, and carrying out a correspondence analysis per type. A survey of bankers was conducted to visualize categorical data and create a positioning map. As a result, first, 12 banking channels were classified into 4 types based on business processing subjects and places, which were then, further grouped into the categories of full-banking and self-banking. Second, a correspondence analysis according to the classified types was carried out, and it was found that the branch-type is suitable for product description and customer management, while the banking-type is suitable for efficient business processing without time and space constraints. Furthermore, the analysis also showed that the machine-type and banking-type are inappropriate for customer management, and the mobility-type demonstrates low operational effectiveness due to a lack of awareness. The aforementioned findings suggest the need for a hybrid convergence channel that reflects the characteristics of banking tasks and fills in the gaps between the different channels. Third, a channel model was derived by adding a common area to the 2×2 model consisting of the business processing subjects and places. Therefore, this study is meaningful in that it examines the diversification of channels and factors in the division of roles by channel type based on customers' banking channel selection factors, and presents basic research findings for future channel strategy establishment and efficient channel operation.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.525-541
• /
• 1995

This study was designed to investigate force systems and tooth movements produced by retraction archwire during retraction of four maxillary incisors after the maxillary canine retraction into the maxillary first premolar extraction space using the computer-aided three-dimensional finite element method. A three-dimensional finite element model, consisting of 2248 elements and 3194 nodes, was constructed. The model consisted of maxillary teeth and surrounding periodontal membranes, .022'$\times$.028'-slot brackets, and 5 types of retraction archwires(.019'$\times$.025' stainless steel archwire) modeled using the beam elements. The contact between the wire and the bracket slot was modeled using the gap elements because of the non-linear elastic behaviors of the contact between them. The forces and moments, End displacements produced by retraction archwire were measured at various conditions to investigate the difference according to types of loops, magnitudes of activation force, gable angle, and anterior lingual root torque. The results were expressed quantitative and visual ways in the three-dimensional method. The following conclusions can be drawn from this study.1. When the tear-drop loop archwire was activated, the mesio-distal and lingual translational movements of the teeth helped to close the extraction space, but unwanted movements of the teeth including intrusions and extrusions, and rotational movements in each direction occurred. 2. Activation of T-loop archwire compared with those of other types of retraction archwires produced the least translational movements of the teeth helped to space closure and also the least unwanted movements of the teeth. 3. Increasing amount of activation in the tear-drop archwire led not only to increase of translational movements of the teeth helped to space closure, but also to increase of unwanted movements of the teeth. 4. Addition of gable bend in the tear-drop archwire helped anterior teeth to translational movements in the mesio-distal direction, but increased unwanted movements of the teeth 5. Addition of anterior lingual root torque in the tear-drop archwire helped central and lateral incisor to improve their facio-lingual inclination, but increased unwanted movements of the teeth.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.632-645
• /
• 2014

This paper criticized the recent Korean 'creative economy policies' focused on regional developmental implications. Even though the policies targeted to promote ICT new startups and build virtuous circle of ICT industrial ecosystem in Korea as a whole, the outside regions of the Seoul-Busan industrial axis where the bases of ICT industries are very weak would suffer from systematic exclusion in ICT investments and deepening regional disparities. Second, ICT-centered policies would selectively affect or operate commensurate with the size of regions in this low-growth, after-financial crisis age. Third, the possibilities of regional insularity and lock-in in these low levels of 'related variety' regions would worsen the industrial competitiveness. Lastly, the policies should be reoriented to fortify region-based creative economic ecosystem based upon triple helix learning region.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.2
• /
• pp.123-136
• /
• 1996

A three-dimensional Galerkin-FEM model which can handle the temporal and spatial variation of density is presented. The hydrostatic approximation is used and density effects are included by means of conservation equation of heat and the equation of state. The finite difference grids are used in the horizontal plane and a set of linear-shape functions is used for the vertical expansion. The similarity transform is introduced to solve resultant matrix equations. The proposed model was first applied to the density-driven circulation in an idealized basin in the presence of the heat exchange between the air and the sea. The advection terms in the momentum equation were ignored, while the convection terms were retained in the heat equation. Coefficients of the vertical eddy viscosity and diffusivity were fixed to be constant. Calculation in a non-rotating idealized basin shows that the difference in heat capacity with depth gives rise to the horizontal gradient of temperature. Consequently, there is a steady new in the upper layer in the direction of increasing depth with compensatory counter flow .in the lower layer. With Coriolis force, geostrophic flow was predominant due to the balance between the pressure gradient and the Coriolis force. As a test in region of irregular topography, the model is applied to the Yellow Sea. Although the resultant flow was very complex, the character of the flow Showed to be geostrophic on the whole.

• Journal of Environmental Impact Assessment
• /
• v.21 no.3
• /
• pp.483-501
• /
• 2012

The purpose of this study was to apply a multi-metric model of Lentic Ecosystem Health Assessments(LEHA) for environmental impact assessments of Cheongpyung Reservoir during 2005 - 2006 and assessed the ecological model values. The ecosystem model of LEHA was composed of eleven metrics such as biological parameters($B_p$), physical parameters($P_p$), and chemical parameters($C_p$), and determined the rank of ecological health by the criteria. The variables of $B_p$ were metrics of % sensitive species($M_2$, NMS) and insectivore species($M_5$, % $I_n$), which decrease as the water quality degradates, and these metric values were low as 1.5% and 32.4%, respectively. In contrast, the proportions of tolerant species and omnivore species as the other $B_p$ parameters were 43% and 62%, respectively, which indicate a degradation and disturbance of the ecosystem. Riparian vegetation coverage($M_9$, % $V_c$) as a variable of $P_p$, were higher in the 2nd than 1st survey, and decreased toward the dam site from the headwaters. This was due to a habitat simplification(modifications) by frequent bottom dredging of sand and rocks. The variables of $C_p$ were two metrics of specific conductivity($M_{10}$, $C_I$) as an indicator of ionic contents(cations and anions) and the Trophic State Index(TSI) based on chlorophyll-a($M_{11}$, $TSI_{CHL}$) as an indicator of trophic state. These metric values of $C_p$ had high temporal variations, but low spatial variations on the main axis of the reservoir along with the ecological health of a good condition. The environmental impact assessments using the LEHA multi-metric model indicated that the model values of LEHA averaged 30.7 in 1st survey(fair - poor condition) vs. 28 in 2nd survey(poor condition), indicating a temporal variation of the ecological health. The model values of LEHA showed a minimum(28) in the lacustrine zone(S5) and ranged from 29 to 30 in the other locations sampled, indicating a low longitudinal variation. Overall, environmental impact assessments, based on LEHA model, suggest that chemical water quality conditions were in good, but biological conditions were disturbed due to habitat modifications by frequent dredgings in the system.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.491-502
• /
• 2008

A certain range of the original ground around the tunnel should be preserved to ensure structural safety of the tunnel when other structures are made around the tunnel, and thus this range is defined as safety zone of the tunnel. The main points to ensure the stability of an existing tunnel when constructing a new tunnel in an inter-crossing area are distance between two tunnels, size of the new tunnel, excavation method for the new tunnel, ground condition around the tunnel, and lining type of the existing tunnel etc. When the new tunnel is excavated above the existing tunnel, the existing tunnel is likely to suffer deformation at a crown zone, damage of arching effect, and live load of the new tunnel etc. On the other hand, when the new tunnel is excavated below the existing tunnel, the existing tunnel is likely to be damaged due to settlement. This study has been made on the behavior of the existing tunnel by means of model test and numerical analysis when the new tunnel is excavated below the existing tunnel. Safety zone of the tunnel was estimated by the results of strength/stress ratio obtained from numerical analysis, and the movement of ground was estimated by the model test. The results of earth pressure, ground displacements, and convergence of the tunnel obtained from model test were compared with those of numerical analysis, and show a similar trend.