• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.325-326
• /
• 2008

상정사고가 발생하거나 전력계통의 구조가 변경된 경우 빠른 시간 안에 계통의 변화 추이를 알 수 있다면 계통 운영에 많은 이점이 있다. 그러나 기존의 시간모의 방법은 모의에 많은 시간이 소요되어 충분한 검토시간을 갖지 못하는 단점이 있고, 준동적 시간모의는 빠른 시간모의가 가능하나 자코비안 특이점으로 인하여 수치해석 오류가 종종 발생하는 단점을 갖고 있다. 전력연구원에서는 이러한 단점이 극복 가능한 연속법이 적용된 QSS에 대한 연구를 진행 중에 있다.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.66-68
• /
• 2000

The Eigen analysis in large power system provides much useful information that is not got in nose curve. The branch participation factor is not quantitative information and is an indirect method calculating incremental change in branch reactive loss. But the Eigen sensitivity analysis to each mode is direct and provides of quantitative information but this method because of needing much time is used in large power system. In this paper the Hessenberg method is used to obtaining dominant eignvalues and corresponding eigenvectors of Jacobian matrix. Ranking the critical contingencies is done by computing the Eigen sensitivity of each dominant eignvalues for changes of each line. The proposed algorithm is tested on the New England 30-bus system and KEPCO system in the year of 2000, which comprises of 791-bus and 2500-branches.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.335-337
• /
• 2005

The purpose of this work is to explain techniques achieved while developing a transient stability program which is suitable to Korean power system, and to add a module for contingency screening. It concentrates on the development of Contingency Screening Module. In this thesis, a fast contingency screening algorithm SIME(Single Machin Equivalent), which is one of the Hybrid methods for the transient stability assessment is used to develop the contingency screening module. The proposed module is applied to a KEPCO system, and simulation results obtained from the program are compared to those of commercial programs.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.139-141
• /
• 2002

This paper describes a new contingency analysis methods for small signal security assessment based on the eigenvalue perturbation. The eigenvalue perturbation with respect to MW changes can be used to find possible sources of the low frequency oscillation, and to select contingency for small signal stability. The proposed algorithm has been successfully tested on the KEPCO systems.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1042-1045
• /
• 1999

This paper presents a new method for contingency selection of the transient stability. Contingency ranking in transient stability is done by estimating the change in the imaginary part of electro-mechanical oscillation mode, which represents modal synchronizing coefficient. And the change in the imaginary part is obtained by applying eigen-sensitivity theory of augmented matrix to linear system model. The Proposed algorithm was tested for New England System and compared the results with PSS/E dynamic simulation.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.201-204
• /
• 1992

In the conventional load flow technique, it is assumed that the generator at the slack bus is used to supply the transmission losses and the change of power due to the generator outage. The assumption is not true in physical sense. This paper presents a new load flow technique that considers the governor-frequency characteristics and load-frequency characteristics and the technique is consistent with the actual power system phenomenon. This paper proposes an efficient methodology using sensitivity with the new technique for contingency analysis, which is used to calculate the line flows. Computational results of this technique applied to IEEE 14-bus system are presented.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.91-97
• /
• 2014

This paper presents the modeling and contingency analysis of Jeju power system. For the analysis of contingency with simulation, thermal power plants, current source type HVDC systems, wind farms, STATCOMs and Jeju power load are modeled by PSCAD/EMTDC program. And three kinds of simulation are carried out. Firstly, two STATCOMSs are in normal operation. Secondly, one STATCOM is in fault. Lastly, all of STATCOMs are in fault. These comparative studies will be useful for evaluating the effectiveness of STATCOM to stabilize for the Jeju power system.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.879-882
• /
• 1988

This paper describes a fast security analysis techique for voltage security assessment. The new method identifies the location of buses with potential voltage problems and thereby defines a voltage-sensitive subnetwork for contingency screening. The efficieny of this method is derived from the use of a voltage subnetwork to drastically reduce the number of bus voltages to be solved; and subsequently from the use of compensation techniques and sparse-vectors methods for screening. Results demonstrating the effectiveness of the method on the IEEE-14 bus model system are presented.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.842-845
• /
• 2009

본 연구에서는 신 에너지전원(태양광)이 배전계통에 연계되어 운용되는 것을 상정하여, 정상상태와 비상(사고)상태, 전력품질(순시), 스마트배전설비 등에 대한 배전계통의 특성 및 신 에너지전원의 특성을 시험하고 분석할 수 있는 분산전원용 계통연계 시뮬레이터를 제작하고 평가하기 위하여, 배전계통 전용해석 S/W인 PSCAD/EMTDC를 이용하여 사전 시뮬레이션을 수행하여 설계를 수행하고, 시험결과를 분석하였다. 본 연구에서 제작한 시뮬레이터는 배전용변전소(154/22.9KV)의 주변압기와 3상 4선식 22.9KV 고압배전선로의 2개 선로 및 부하를 축약형태(약 1/100)로 모의한 것이지만, 주상변압기(13,200/380/220V) 이하의 저압 배전선로는 실계통과 거의 동일한 상태로 모의한 것이다. 이상의 구성요소 데이터를 산출하기 위하여 PSCAD/EMTDC를 이용하여 사전 시뮬레이션을 수행하여 설계 및 제작을 수행하고 그 효용성을 확인하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.149-155
• /
• 2004

This paper presents how to find proper operating points of FACTS devices to enhance the steady-state security level considering line contigency analysis. Three generic types of FACTS devices such as series controllers, shunt controllers, and series-shunt controllers are introduced and applied to moximize a security margin and to minimize security indices. Security indices related to line flows and bus voltages are utilized and minimized iteratively in this paper. Contingency analysis is performed to detect the most severe single line fault. In various load conditions, FACTS devices are tested to establish appropriate preventive or corrective action without generation re-dispatching or load shedding. The FACTS operation scheme is verified on the IEEE 57-bus system in a line-faulted contingency.