• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1136-1142
• /
• 2001

$Zn_xSr_{1-x}S$ thin films were prepared in the whole composition range by rf sputtering, using powder targets of a mixture of ZnS and SrS with the required mole fraction. The possibility of existence of $Zn_xSr_{1-x}S$ solid solutions was systematically investigated from the results of thin film growth, in terms of structural, optical characteristics and the chemical bonding of the constituent atoms. The XRD, XPS and optical results made it clear that the solid solutions with a single-phased zincblende structure and a single-phased rocksalt structure were formed at $0.86~0.93{\leq}x{\leq}1\;and\;0{\leq}x{\leq}0.29$, respectively. The miscibility gap, including phase separation regions was found to exist in $0.3{\leq}x{\leq}0.86~0.91$, in which lattice constants, binding energy and absorption edges kept almost constant by the same values as those at border compositions. The experimental results on phase transition agreed well with the fraction of ionic character fi based on the Phillips' dielectric theory.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.386-393
• /
• 1998

We have carried out the measurements of complex dielectric constants with impedance/gain-phase analyzer using capacitor method and the experiments of high temperature X-ray powder diffraction with X-ray diffractometer using ${\theta}-2{\theta}$ scan method for the KTP single crystal which has the premium nonlinear optical properties. From the results of high temperature X-ray powder diffraction experiments, we have found that KTP does not undergo structural phase transition below $900^{\circ}C$. It is clear that KTP undergoes structural phase transition around $900^{\circ}C$ and belongs to orthorhombic above $900^{\circ}C$ still. However, we have applied phenomenological relation of dielectric relaxation to the results of complex dielectric measurement and have found that relaxation mechanism of KTP well satisfies the Cole-Cole relation over the temperature range from $-78^{\circ}C$ to $200^{\circ}C$. And also the relaxation time well satisfies the Vogel-Fulcher relation. It is regarded that the hopping and thermally activated diffusion mechanism may control the conduction behavior of KTP above $200^{\circ}C$.

• Applied Biological Chemistry
• /
• v.25 no.4
• /
• pp.224-231
• /
• 1982

${\alpha}-Tocopherol$ was found to be a fluorescent probe in determination of the phasetransition temperature of liposome. Since this was a discovery of a new aspect of ${\alpha}-tocopherol$ as an important biochemical molecule, its molecular spectroscopic characterization was carried out in order to obtain some informations on its spectral and, structural properties in various media, anticipating that the compound may entertain a wide applications in biochemical systems as a spectroscopic probe. Two species of α${\alpha}-tocopherol$, monomer and dimer, were found to exist in organic media, especially in solvents of nonhydrogen bonding ability. Monomer with maximum UV-absorption around $(291{\sim}294nm)$ is highly fluorescent, while dimer which is formed by intermolecular hydrogen bonds and absorbes with spectral peak at 298nm is nonfluorescent. ${\alpha}-tocopherol$ incorporated to liposome exhibits emission property quite different from that in various organic media showing broad and red-shifted fluorescence excitation and emission spectra. This spectral abnormality is to be interpreted to arise from chromanolate-type ion, H-dissociated ${\alpha}-tocopherol$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.660-664
• /
• 2001

$Zn_xSr_{1-x}S$ thin films were prepared in the whole composition range by rf sputtering, using powder targets of a mixture of ZnS and SrS with the required mole fraction. The possibility of existence of $Zn_xSr_{1-x}S$ solid solutions was systematically investigated from the results of thin film growth, in terns of structural, optical characteristics and the chemical bonding of the constituent atoms. The XRD, XPS and optical results made it clear that the solid solutions with a single-phased zincblende structure and a single-phased rocksalt structure were formed at $0.86~0.93{\leq}x{\leq}1$ and $0{\leq}x{\leq}0.29$, respectively. The miscibility gap, including phase separation regions was found to exist in $0.3{\leq}x{\leq}0.86~0.91$, in which lattice constants, binding energy and absorption edges kept almost constant by the same values as those at border compositions. The experimental results on phase transition agreed well with the fraction of ionic character $f_{i}$ based on the Phillips'dielectric theory.

• The Korean Journal of Pharmacology
• /
• v.24 no.1
• /
• pp.43-52
• /
• 1988

To elucidate the mechanism of action of local anesthetics, the effects of local anethetics on the microenvironment of the lipid bilayers of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine brain and dimyristoylphosphatidylcholine (DMPC) multilamellar liposomes were investigated employing the intermolecular excimer fluorescence technique and differential scanning calorimetry (DSC). The relative intensities of excimer and monomer fluorescence of pyrene are a simple linear function of the viscosity of a homologous series of solvents. The microviscosity(${\eta}$)of the hydrocarbon region of SPMV was measured by this method and the value was $57.3{\pm}5.3\;cP$ at $37^{\circ}C$. In the presence of lidocaine-HCl and procaine-HCl, the values decreased to $46.5{\pm}5.1\;cP$ and $54.7{\pm}4.8\;cP$, respectvely. The differential scanning thermograms of DMPC multilamellar liposomes showed that local anesthetics significantly lowered the phase transition temperature, broadened the thermogram peaks, and reduced the size of the cooperative unit. These results indicate that local anesthetics have significant fluidizing effects on biomembranes and perturbation of membrane lipids may produce some, but not all, of their pharmacological actions.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.759-764
• /
• 2018

3D porous carbon electrodes (cNPIM), prepared by solution casting of a polymer of intrinsic microporosity (PIM-1) followed by nonsolvent-induced phase separation (NIPS) and carbonization are presented. In order to effectively control the pore size of 3D porous carbon structures, cNPIM was prepared by varying the THF ratio of mixed solvents. The SEM analysis revealed that cNPIMs have a unique 3D macroporous structure having a gradient pore structure, which is expected to grant a smooth and easy ion transfer capability as an electrode material. In addition, the cNPIMs presented a very large specific surface area ($2,101.1m^2/g$) with a narrow micropore size distribution (0.75 nm). Consequently, the cNPIM exhibits a high specific capacitance (304.8 F/g) and superior rate capability of 77% in an aqueous electrolyte. We believe that our approach can provide a variety of new 3D porous carbon materials for the application to an electrochemical energy storage.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.527-533
• /
• 2006

Spinel $LiNi_xMn_{2-x}O_4$ thin films were synthesized up to x = 0.9 by a sol-gel method employing spin-coating. The Ni-substituted films were found to maintain cubic structure at low x but to exhibit tetragonal structure for $x{\geq}0.6$. Such cubic-tetragonal phase transition indicates that $Ni^{3+}(d7)$ ions with low-spin $(t_{2g}^6,e_g^1)$ state occupy the octahedral sites of the compound, thus being subject to the Jahn-Teller distortion. By x-ray photoelectron spectroscopy both $Ni^{2+}$ and $Ni^{3+}$ ions were detected. Optical properties of the $LiNi_xMn_{2-x}O_4$ films were investigated by spectroscopic ellipsometry (SE) in the visible?ultraviolet range. The measured dielectric function spectra by SE mainly consist of broad absorption structures attributed to charge-transfer (CT) transitions, $O^{2-}(2p){\rightarrow}Mn^{4+}(3d)$ for 1.9 $(t_{2g})$ and $2.8{\sim}3.0$ eV $(e_g)$ structures and $O^{2-}(2p){\rightarrow}Mn^{3+}(3d)$ for 2.3 $(t_{2g})$ and $3.4{\sim}3.6$ eV $(e_g)$ structures. Also, sharp absorption structures were observed at about 1.6, 1.7, and 1.9 eV, interpreted as due to d-d crystal-field transitions within the octahedral $Mn^{3+}$ ion. The strengths of these absorption structures are reduced by the Ni substitution. Rapid reduction of the CT transition strength involving the eg states for x = 0.6 is attributed to the reduced wavefunction overlap between the $e_g$ and the $O^{2-}(2p)$ states due to the tetragonal extension of the lattice constant by the Jahn-Teller effect.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.47-50
• /
• 2007

[ $ZnCr_2O_4$ ] shows geometrically frustrated magnet. Recently, $CoCr_2O_4$ has been investigated for multiferroic property and dielectric anomalies by spin-current model. Polycrystalline $CoCr_2O_4$ and $CoCrFeO_4$ compounds was prepared by wet-chemical process. Crystallographic and magnetic properties of $CoCr_2O_4$ and $CoCrFeO_4$ were investigate by using the x-ray diffractometer(XRD), vibrating sample magnetometer(VSM), superconducting quantum interference device magnetometer(SQUID), and $M\"{o}ssbauer$ spectroscopy. The crystal structure was found to be single-phase cubic spinel with space group of Fd3m. The lattice constants of $CoCr_2O_4$ and $CoCrFeO_4$ $a_0$ were determined to be 8.340 and 8.377 ${\AA}$, respectively. The ferrimagnetic transition temperature for the both samples were observed at 97 K and 320 K. The $M\"{o}ssbauer$ absorption spectra at 4.2 K show that the well developed two sextets are superposed with small difference of hyperfine field($H_{hf1}=507\;and\;H_{hf2}=492\;kOe$). Isomer shift values($\delta$) of the two sextets are found to be 0.33 and 0.34 mm/s relative to the Fe metal, respectively, which are consistent with the high spin $Fe^{3+}$ charge state.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.55-85
• /
• 1996

지르코니아 분말은 ZrO2 결정상이 온도변화에 따라 부피변화를 수반하는 상전이변태를 나타낸다. 단사정 ZrO2가 110$0^{\circ}C$에서는 정방정으로, 2$700^{\circ}C$ 내외에서는 입방정으로 결정구조가 가역적으로 변한다. 이 ZrO2에 금속산화물을 고용시키면 형석 (CaF2:Florite)형의 입방정 결정구조가 실온에서도 안정하게 존재하게 된다. 안정화제 산화물은 caO, MgO등 2가 산화물외에 3가 또는 4가의 금속산화물로서 Sc2O3, Y2O3, Sm2O3, Nd2O3, Gd2O3, Y2O3, CeO2 등이며 이들은 금속이온의 원자가가 변하기 쉬운 희토류 산화물이다. 안정화 지르코니아는 형석형 결정구조이며 결정화학적으로 보면 금속양이온이 산소이온에 대해서 정육면체형의 8배위를 하고 있다. 이때 이온반경비(양이온/음이온)에 따라 Zr+4자리와 O-2자리의 격자위치와 모양이 형성되므로 비틀어진 정육면체구조이건 이상적인 정육면체 형석구조를 이룬다. 이는 지르코니아의 결정상의 2상-3상인 부분안정화 지르코니아다결정체(PSZ : partially stabilized zirconia)이거나 단일상-2상인 정방정 지르코니아다결정체(TZP : tetragonal zirconia polycrystal)의 결정구조를 가지는데 기인한다. PSZ는 주로 MgO, CaO를 안정화제로 고용시켜 입방정 영역에서 소결하고 이를 다시 입방정과 정방정의 상 영역에서 열처리하여 입방정 입자내부에 정방정을 석출 형성시킨 것이며 TZP는 Y2O3 및 CeO2를 고용시켜 PSZ와 다르게 일반적인 상압소결한 정방정 결정상의 미립자이다. 산화지르코늄 분말은 지르콘사에서 열분해시킨 지르코늄소결.융해괴(caustic fusion clinker)를 산처리하여얻어진 지르코늄산용액(zirconyl acid solution : cloride, sulfide, nitride 등)으로부터 제조된다. 고순도 산화지르코늄은 용액 결정석출법에 의해 ZrOCl2.8H2O, 5ZrO2.3SO3.15H2O, ZrO(NO3)2.xH2O 등의 지르코늄 수화물만을 재결정화시킨 것으로부터 얻을 수 있으며 이 지르코늄염 수용액으로부터 입자미세구조를 효과적으로 제어하여 산화지르코늄 및 안정화 지르코니아 분말제조가 가능하다. 안정화 지르코니아 분말은 ZrO2와 안정화산화물의 고용을위하여 가열처리를 필요로 하며 일정온도에서 최적상태로 숙성하므로서 2가지 상(phase) 이상의 고용체를 가지게 된다. 안정화 지르코니아 분말은 고용처리온도를 낮추고 효과적으로 생성시키기 위해서는 지르코늄 및 안정화제염을 혼합하고 습식 직접합성하여 저온에서 고용체의 합해진상 영역을 생성시키는 것이다. 이는 지르코니아 원료분말의 미세구조를 제어하므로서 가능하며 이때 화학성분조성과 크기형태가 균일하게 분포된 입자분말을 얻을 수 있다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.900-906
• /
• 2004

Solid oxide fuel cells have a limitation in their low-temperature application due to the low ionic conductivity of electrolyte materials and difficulties in thin film formation on porous gas diffusion layer. These problems can be solved by improvement of ionic conductivity through controlled nanostructure of electrolyte and adopting nanoporous electrodes as substrates which have homogeneous submicron pore size and highly flattened surface. In this study, ultra-thin oxide films having submicron thickness without gas leakage are deposited on nanoporous substrates. By oxidation of metal thin films deposited onto nanoporous anodic alumina substrates with pore size of $20nm{\sim}200nm$ using dc-magnetron sputtering at room temperature, ultra-thin and dense ionic conducting oxide films with submicron thickness are realized. The specific material properties of the thin films including gas permeation, grain/gran boundaries formation, change of crystalline structure/microstructure by phase transition are investigated for optimization of ultra thin film deposition process.