• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.169-174
• /
• 2018

In this paper, a design method for a wideband LPF for harmonic suppression applications is investigated. The proposed wideband LPF is comprised of four circular slot pairs with different diameters, which are added symmetrically in the ground plane of a CPW transmission line. Four circular slot pairs act as a defected ground structure and provide a wideband low pass characteristic. The circular slot with the smallest diameter is located at the side of port 1, and the diameter of the circular slot is increased as it goes toward port 2. The low pass characteristics of each circular slot are compared with the proposed wideband LPF. The final designed LPF was fabricated on FR4 substrate, and its characteristics were tested. The measured S11 characteristic was maintained at over -3.3 dB in the frequency range of 1.89-20.00 GHz band, whereas the S21 characteristic was less than -21.4 dB in the frequency range of 2.66-20.00 GHz.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.523-526
• /
• 2014

Three dogs were admitted for repair of bone fracture. Case 1 (Maltese, 1.8 kg, intact female, 5-month-old) and case 2 (poodle, 3.0 kg, intact female, 6-month-old) had non-weight bearing lameness in the left pelvic limb, and case 3 (mixed, 3.3 kg, intact female, age unknown) had non-weight-bearing lameness in the left thoracic limb. On orthopedic examination, there was pain, crepitus, palpable instability and substantial soft tissue swelling on the affected side. No neurological deficits were identified. Radiographs revealed left proximal metaphyseal tibial and fibular fractures in cases 1 and 2, and left proximal metaphyseal radial and ulnar fractures in case 3. All cases had closed long-bone fractures with short juxta-articular fracture segments. Under fluoroscopic guidance, proper placement of the ring fixation elements was confirmed during surgery. Two or three rings were used to stabilize fractures with traditional circular external skeletal fixators (CESF). Postoperative radiographs showed acceptable alignment and apposition of the previously identified fracture. Time to radiographic union ranged from 5 to 14 weeks and there were no signs of implant failure or pin tract infection. Functional outcomes were excellent in all cases. CESF can be successfully used to reduce short juxta-articular fractures in which bone plates or external skeletal fixation cannot be applied.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.95-107
• /
• 2022

This study attempted to develop a bodice prototype suitable for the 20's obese male's trunk with a BMI of 25kg/m² or more, which is distinguished from the standard body type. Through this, it was intended to provide data to help the development of clothing for obese males. Patterns such as front bodice shoulder line and front sagging were modified through primary appearance and garment pressure evaluation. Through the second evaluation, corrections such as back armhole, back waistline, and front sagging were performed. Through the third evaluation, the final pattern drafting method was developed by removing the front sagging added through the second evaluation. In the case of obese male body types in their 20s, a drafting method distinguished from the standard body type was required in the method of setting the front and back waist lines, back armhole darts, and front shoulder lines due to protruding and posture of the abdomen. This study was meaningful in that it presented a bodice prototype drafting method suitable for the 20s obese males. In the follow-up study, it is thought that actual clothing experiments and studies to develop clothing patterns by applying them to obese male tops in their 20s should be conducted.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.10a
• /
• pp.31-34
• /
• 2003

쥐치들망이란 원형의 상하 고리 테로 원통형 틀을 만들어 옆면과 아래면은 그물을 씌워 차단한 운통형 그물을 투양망할 수 있도록 구성된 어구를 수중에 부설하였다가 어군이 틀 안에 들어오면 들어 올려 잡는 도구를 일컫는다. 미끼 주머니에 법동 곤쟁이를 넣어서 어군을 그물 안으로 유집한다. 어기는 4∼10월이며, 어획물은 말취치, 쥐치, 자리돔, 놀래기류 등이며, 어획물을 살려서 귀항하여 활어로 출하한다. (중략)

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.169-188
• /
• 2019

This study was carried out unmanned aerial photography and terrestrial laser scanning to establish digital database on original wall of Gyejoksanseong fortress, and measured ground control points for continuity of the monitoring. It also performed precise examination with the naked eye, unmanned aerial photogrammetry, endoscopy, total station and handy measurement to examine the structural stability of the original walls. The ground control points were considered as a point where visual field can be secured, 3 points were selected around each of the south and north walls. For the right side of the south original wall, aerial photogrammetry was conducted using drones and a deviation analysis of 3-dimensional digital models was performed for short-term monitoring. As a result, the two original walls were almost matched in range within 5mm, and no difference indicating displacement of stones was found, except for partial deviation. Regular monitoring of the areas with structural deformation such as bulging, weak and fracture zone by precisely examining with the naked eye and using high-resolution photo data revealed no distinct change. The inner foundation observed through endoscopy found out that filling stones of the original walls were still remained, while most filling soil was lost. As a result of measuring the total station focusing around the points with structural deformation on the original walls, the maximum displacements of the north and south walls were somewhat high with 6.6mm and 3.8mm, respectively, while the final displacements were relatively stable at below 2.9mm and 1.4mm, respectively. Handy measurement also did not reveal clear structural deformation with displacements below 0.82mm at all points. Even though the results of displacement monitoring on the original walls are stable, it is hard to secure structural stability due to the characteristics of ramparts where sudden brittle fracture occurs. Therefore, it is necessary to conduct conservational scientific diagnosis, precise monitoring, and structural analysis based on the 3-dimensional figuration information obtained in this research.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.136-143
• /
• 1995

Using a PEG- dextran two phase partition method, plasma and intracellular membrane separated from microsomal membrane of canola (Brassica napus) leaves have been fractionated by centrifugation. $K^{+}$- ATPase specific activity in the plasma membrane (U$_2$ phase) of plants grown at $25^{\circ}C$ and 1$0^{\circ}C$ were 6.6 and 4.6 times, respectively that of the microsomal membrane. Plasma membrane had a lower cytochrome- c- oxidase specific activity than the microsomal membrane or intracellular membrane, while intracellular membrane (L$_2$ phase) had a high cytochrome-c- oxidase but little $K^{+}$- ATPase specific activity. The plasma membrane of canola grown at 1$0^{\circ}C$ had higher 18:3 to 18:2 (linolenic to linoleic acid) ratio (29.2% ) and higher degree of unsaturation than that grown at $25^{\circ}C$ The double bond index of plasma membrane from canola grown at 1$0^{\circ}C$ increased by 8.9% relative to canola grown at $25^{\circ}C$. Similar, intracellular membrane increased by 19.7% at 1$0^{\circ}C$. Canola grown at 1$0^{\circ}C$ was lower in chlorophyll contents (17.3%) than that grown at $25^{\circ}C$. These changes in fatty acid unsaturation were attributable largely to change in Cl8 fatty acid, with major changes occurring in linolenic acid (18 :3) which might have a physiological role of membrane to adaptation on low temperature.ure.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.1
• /
• pp.120-145
• /
• 2016

An understanding of 'original form' plays an important role as it is the starting point of heritage conservation. This paper delineated several types of understanding on 'original form' over times, and aims at analyzing the way how such concepts has provided a platform of repair works of timber buildings in Korea over times. Conservation in Korea was initiated by the attitude of the Japanese authority during the Colonial period and 'restoring into the earliest form', which had been set in the early stage of the Japanese conservation, has strongly influenced on Korean practice during the period. Such attitude has lasted even after the independence of Korea. In Japan, however, the attitude has shifted to taking a careful decision on the alteration of the existing form during the 1930s. In addition, examination and research in the repair work became essential steps to conduct along with the publication of the report of works. In Korea there has been lack of understanding on the importance of examination and research in repair works and the publication of report of the works has not been mandatory so that it has emphasized on the 'form' in conservation aiming at 'restoring the earliest form'. Such attitude has created the problem of replacing original material during the work which should aim at preserving and maintaining heritage in Korea. Because of these circumstances in preserving the architectural cultural properties in Korea, cultural buildings had succeeded in preserving the outer appearance but there are remaining questions on preserving the original states of them. This paper has pointed out that it is necessary to set out the principles of conserving 'original condition' through further study and discussion based on the careful consideration on both the international principles and Korean context.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.215-220
• /
• 2013

They are well-known geometric properties of a circle that the perpendicular bisector of a chord passes through the center of a circle, and the intersection of the perpendicular bisectors of any two chords is its center. This paper is related to a fast pupil detection method capable of detecting the center and the radius of a pupil using these geometric properties at high speed when detecting the pupil region for iris segmentation. The proposed method is characterized as rapidly detecting the center and the radius of the pupil, extracting the candidate points of the circle in human eye images using morphological operations, and finding two chords using four points on the circular edge, and taking the intersection of the perpendicular bisectors of these two chords for its center. The proposed method can not only detect the center and the radius of a pupil rapidly but also find partially occluded pupils in human eye images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.892-898
• /
• 2008

3D rapid prototyping is the manufacturing technology to fabricate a prototype with the data stored in a computer, which differs from conventional casting technology in terms of an additive process. Various 3D rapid prototyping techniques such as stereolithograpy. fused deposition modeling. selective laser sintering, laminated object manufacturing have been developed but among them, 3D inkjet printing has a unique feature that materials could be jetted to directly form the body of a prototype, which could be a finished product functionally and structurally. However, this needs ink with a high solid content, which tends to increase the dynamic viscosity of ink. The increase of ink viscositytends to restrict the jettable range of ink and hence the jetting conditions should be optimized. The intrinsic speed of sound in a hot melt ink with ceramic nanoparticles dispersed is one of key components to determine the jettable range of ink. In this paper, the way to measure the intrinsic speed of sound in a hot melt ceramic ink is proposed and its influence on the jetting condition is discussed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.15-22
• /
• 2007

A hybrid experimental-numerical method is presented for determining the stresses around a circular hole in a finite-width, tensile loaded plate. Measured fringe orders along straight lines provided the input information on the external boundary of the hybrid element. In order to see the effects of varying stress field, different numbers of terms in a power-series representation of the complex type conformal mapping stress function were tested. For qualitative comparison, actual isochromatic fringes were compared with reconstructed theoretical fringes using stress-optic law. For quantitative comparison, relative errors and standard deviations with respective to relative errors were analyzed for all measured points by changing the number of terms of stress function. The hybrid results are highly comparable with those predicted by FEA. The results show that this approach is effective and promising because isochromatic data along the straight lines in photoelasticity can be conveniently measured by use of phase shifting photoelasticity.