• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.205-210
• /
• 2020

The purpose of this study is to propose grading increments chart for women's bodice sloper in their 20s in order to increase consumer satisfaction with apparel products. The selected bodice sloper is a compromise between the German Müller bodice sloper and the Japanese Munhwa bodice sloper. Based on National Standards Position Survey data, the main dimension average for women in their 20s was set. The grading increments was set at the grading deviation application area in bodyboard and sleeve. Thereafter grading was done and the suitability of the graded pattern was checked.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1754-1762
• /
• 2001

본 연구의 목적은 적합성과 기능성이 고려된 체형별 남성 상의 원형 패턴을 개발하는데 있다. 피험자는 인체계측자료와 측면체형 사진에 의해 선정하고, 체형은 굴신체형, 표준체형, 반신체형으로 분류하였다. 체형별 실험 원형 패턴의 평가를 위하여 기존원형을 선정하였으며, 연구 결과는 다음과 같다; 1. 착의평가 결과 표준체형은 대부분의 항목에서 적합하였으나, 굴신체형과 반신체형에서는 많은 차이가 있었다. 이러한 차이는 앞길이와 등길이 뿐만 아니라 여유량과 윗 가슴둘레에 서 나타난다. 앞품과 뒤품은 외관에 의해 많은 영향을 받으며, 증가된 옆품은 앞품과 뒤품의 부족분을 보충하는 역할을 하였다. 따라서 실험패턴은 기존패턴보다 각 체형에 더욱 적합하며, 체형 적합성과 동작기능성이 고려된 의복 제작을 위한 패턴설계는 인체의 구조와 동작연구에 의해 가능하였다. 2. 기본원형 패턴 설계를 위한 필요치수는 목뒤높이, 등길이, 앞길이, 윗 가슴둘레, 앞품과 뒤품이며, 체형분류의 기준은 윗 가슴둘레, 앞품, 뒤품, 앞길이, 등길이이다. 이와 같은 결과를 근거로 가슴둘레 선은 [(B/2+B/10), 뒤진동깊이는 [(B/10+목뒤높이/10)]로 설정하고, 앞내림은 1.5cm로 하였다.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.193-200
• /
• 1997

Even though there are many analysis methods of circular tanks on elastic foundation, the finite element method is widely used for that purpose. But the finite element method requires a number of memory spaces, computation time to solve large stiffness equations. In this study many the simplified methods(Analogy of Beam on Elastic Foundation, Foundation Stiffness Matrix, Finite Element Method and Transfer Matrix Method) are applied to analyze a circular tank on elastic foundation. By the given analysis methods, BEF analogy and foundation matrix method, the circular tank was transformed into the skeletonized frame structure. The frame structure was divided into several finite elements. The stiffness matrix of a finite element is related with the transfer matrix of the element. Thus, the transfer matrix of each finite element utilized the transfer matrix method to simplify the analysis of the tank. There were no significant difference in the results of two methods, the finite element method and the transfer matrix method. The transfer method applied to a circular tank on elastic foundation resulted in four simultaneous equations to solve completely.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.62-73
• /
• 2002

The purpose of this study was to develop men's formal jacket pattern for the Korean males of age 25 to 34 age with an average physique. Through the survey on seven industries of the ready-made men's wear, we investigated size systems and jacket patters presently practiced. From the fitting test of four patterns (three for ready-made jacket patterns, one for educational pattern) the moat favorable and comfortable pattern was selected. New experimented jacket pattern was based on it. The findings were as followed. 1) Survey of the domestic ready-made garment industries showed that each company classified its own manufactured goods according to its own size systems. 2) Anthropometric measurments of forty males for the subjects of lilting test were agreed to the survey of National Anthropometric of Korean(1997). These were also compatible to the standard size (100-88-175) of investigated industries. 3) Experimental jacket pattern was completed through the three times rectification and it gained higher ratings.

• Journal of Fashion Business
• /
• v.27 no.3
• /
• pp.96-114
• /
• 2023

In modern society, there is a tendency to prioritize both fashion and comfort, with a preference for loose-fit clothing that enhances mobility. While darts may not be visibly present on the garment's exterior, their effects should be dispersed and incorporated into the design. However, there is a significant lack of systematic research on dartless patterns in the current state. Therefore, this study focuses on investigating dartless patterns used in loose-fit clothing tailored to the body measurements of women in their 20s. The objective of this research is to develop foundational dartless patterns that serve as a basis for diverse design possibilities in loose-fit clothing. To achieve this purpose, seven dartless patterns introduced in clothing construction references were selected for the production of experimental prototypes, which were then subjected to visual evaluations by a panel of experts. Based on the evaluation results, superior patterns were selected and they underwent modification and improvement to develop the research patterns. The developed research patterns were derived through the formulation of calculation formulas, and based on these formulas, garments were produced. Subsequently, a second round of visual evaluations was conducted by a panel of experts, and notable improvements were observed in most of the aspects assessed. However, it should be noted that this study was limited to women in their 20s it did not explore a wide range of fabrics. Therefore, further research is needed in the future.

• Proceedings of the KGS Conference
• /
• 2004.05a
• /
• pp.93-93
• /
• 2004

한반도의 서ㆍ남해안 일대는 방어 상의 이유와 넓은 해안 충적평야, 해안 저지대의 농경제적 가치 때문에 다른 지역에 비해 우선적으로 읍성 축조가 이루어졌다. 내포지역은 그러한 대표적인 공간이다. 내포지역의 읍치 경관 원형은 타지역과 마찬가지로 네개의 성문을 가지면서 배후의 객사군과 전면의 아사군 경관으로 이루어지는 것이 원칙이었다. 이러한 원칙은 방위와 길흉의 연관성에 대한 전통적 관념이나 권력의 자연화 전략을 반영하는 것이었다. (중략)

• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.45-59
• /
• 2016

This research is a study to develop basic block patterns for adult males. The subjects were 20 men in their 20s, and we tested 6 basic bodice blocks that are used in academia and industry. First, a comparative analysis of the patterns of the bodice blocks was conducted and the test garments were made, and then their appearances were evaluated during wearing tests. Based on the test results, we intended to select a bodice block that is a good fit when it is put on and to use it as basic data in order to design a man's bodice block for the future. The research results are as follows: First, a comparison of the 6 bodice block drafts showed that they used differently calculated ease allowances at chest circumference and width, waist circumference, shoulder length, etc. for which the upper chest circumference is used as a reference. Second, when the appearances of the test garments were tested, the average scores were high in the order of B> H> P> K> M> L. Pattern B was superior in the areas of the neck circumference and shape, ease allowance at the back of the neck, circumference of the front of the neck, location of side width, ease allowance at sides, armhole width and depth. But in the other test items, there were cases where other patterns were superior.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.210-210
• /
• 2003

휘스커상의 뮬라이트의 생성온도와 속도는 출발물질로 사용되는 알루미나와 실리카의 화학적 순도, 입자크기 그리고 결정형태에 의존하며, 알루미나와 실리카의 조성비에 따라 생성되는 뮬라이트의 형태가 변한다. 각 원료에 대한 반응성을 관찰하기 위하여 출발원료인 Al(OH)$_3$, 비정질 SiO$_2$, AlF$_3$를 혼합 각각 단일조성과 2상 및 3상의 원료를 혼합 분쇄하여 분무건조한 조립분말을 5$0^{\circ}C$ 구간으로 나누어 상온에서 130$0^{\circ}C$까지 튜브 로에서 열처리하였다. Al(OH)$_3$와 AlF$_3$를 단독으로 열처리하였을 경우에는 안정한 상태로 열처리가 진행되었으나, 혼합하였을 경우에는 40$0^{\circ}C$ 이상의 온도에서 서서히 반응하였다. 각 온도구간에서 열처리한 시편은 미세구조 관찰과 상분석을 통하여 플루오르 토파즈와 휘스커상의 뮬라이트의 생성을 관찰하였으며, 생성된 휘스커 뮬라이트는 조립의 형상을 원형대로 보존하였으며, 조립의 강도를 측정하기 위하여, 초음파 분산기와, 초음파 Homgeniger를 이용하여 처리한 결과 대부분 원래의 형상을 유지하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.7
• /
• pp.1004-1014
• /
• 2000

The purpose of this study was to develop a well-fitting bodice basic pattern for high school irk. Two bodice patterns were first made based on the most recent existing drafting methods and sensory evaluation was done on the patterns by the present researchers Two high school girls possessing standard physical condition tried and evaluated the functionality of the garments made by the two bodice patterns. Based on the results of the evaluation, a new bodice basic pattern was developed. The new bodice basic pattern was drafted by long measurement method. The dimensions of new bodice basic pattern were as follows. Bust circumference=B/2+4cm, Arms hole depth=C.B/2+1.5cm, Back width=B/6+4cm, Front width=B/6+3cm, Back neck width=B/12+0.5cm, Back neck depth=Back neck width/3cm, Front neck width=B/12cm, Front neck depth=B/12+0.5cm. The sensory and functional evaluations were also conducted for the new bodice basic pattern and the two patterns drafted by the existing methods. The new bodice basic pattern showed better fit both visually and functionally than the existing patterns. SPSS package including means, standard deviation and one-sample T-test were used for data analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.139-148
• /
• 2009

In this study, we tried to verify the effectiveness of 3D scans of clothed participants from 20 to 24 year old men in fit analysis process. Carrying out fit analysis, we used 3D scan data and direct fit evaluation with the basic garments made as semi-fitted bodice pattern for men. The result of fit evaluation through 3D scan data showed the expert rated fitting items more positive than direct fit evaluation. Even though, generally there was a no significant difference in the response between 3D and direct fit analysis. Only there was a significant difference in the response to the specific place such as the center front line, neckline, shoulder seam, and etc. There was a no significant difference between the result of 3D scan and direct fit evaluation in the subjects' group. Also the result of assessment of 3D targeting consumers showed very positive and interested in using 3D scans for fit analysis. The ability to rotate the 3D scans for a variety of views proved to be a very effective process to analyze fit. Moreover, digital data is easily accessed at any locations and any time. Fit analysis using 3D scans could be great tool for not only fit evaluation in research but also better fitting in apparel industry.