• Water for future
• /
• v.29 no.5
• /
• pp.161-172
• /
• 1996

Studied are the existing equations of Hazen-Williams and Colebrook-White, and the equations of Yoo's (1995) mean zero velocity point and mean friction factor developed for the estimation of commercial pipe friction factor. Simple arrangements of pipe network are devised by changing the diameter, flow discharge and length, and the characteristics of four equations are investigated by comparing the computed results of pressures at each node. Three groups of pipe diameter, small, medium, large, are considered in the comparison, and various problems of existing equations are discussed based on the computed results of pressures and velocities.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.495-501
• /
• 1997

Pumping power being given, traditional method requires an iteration process for the solution of discharge and pipe diameter. Yoo and Kang (1996) have developed explicit equations for the estimation of discharge and pipe diameter for the cases of uniformly rough pipe on a sloping bed with a pumping power. The use of poser law for the estimation of friction factor enabled to develop the explicit form of equations. Yoo (1995a) has suggested the mean friction factor method for the estimation of friction factor of commercial pipe or composite surface pipe. With the same approach, the present work has developed the explicit equations of discharge or pipe diameter for the general case of commercial pipe on a sloping bed with a pumping power by adopting the mean friction factor method.

• Journal of Korea Water Resources Association
• /
• v.31 no.5
• /
• pp.565-574
• /
• 1998

The friction factor distribution of commercial pipes vary according to the pipe type and size. The present paper developed the friction factor equations of power law by analyzing the data reported by Colebrook(1938). Generally, pipe design requires pump power, discharge or pipe diameter for each condition given. Yoo(1995b) has suggested the basic equations for the explicit design of uniformly rough pipe and Yoo and Kang(1996) have refined those equations for the cases of uniformly rough pipe on a sloping bed with a pumping power. Furthermore Yoo and Kang(1997) have studied the design of commercial pipe for a general case. The approach gives relatively accurate solutions, but the equations obtained are rather complicated. In the present study two types of power law are developed for the friction factor of commercial pipe, and explicit forms of equations are generated by applying the power law friction factor equations for the simple design of commercial pipes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1998.05a
• /
• pp.493-498
• /
• 1998

• Journal of Korea Water Resources Association
• /
• v.32 no.4
• /
• pp.469-478
• /
• 1999

Explicit equations of minimum velocity, energy slope and pipe diameter are developed to ensure the cleaning of sewerage pipes. The equations of power form are employed for the estimation of critical shear stress of sediment particles and the friction factor of commercial pipes. They are all based on the existing laboratory data. Several cases are tested to check the values suggested in the manual, using the equations developed in the present study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1994.02a
• /
• pp.411-416
• /
• 1994

• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.31-43
• /
• 2001

The friction factor of commercial pipe varies with wide range depending on pipe type and pipe size. Various methods can describe the wide variation of friction factor with good accuracy, but they normally require an iteration process even for solution of a simple case. Power law can result in an explicit form of solver so that the power law is rigorously employed for the development of direct solution technique. The parameters used in the present form of power law are allowed to haute some variation with pipe size and Reynolds number as well as pipe type for wider coverage with good accuracy, while Hazen-Williams equation permits limited variation which accounts only for the roughness or the pipe type. Furthermore secondary loss is considered in the development of explicit equations for design of commercial pipes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.174-174
• /
• 2015

국내의 국지성 집중호우와 같은 기후변화와 토지피복율 증가 등 복합적인 원인으로 인한 표면 유출수의 증가로 도시에서의 내수침수가 매년 빈번하게 발생하고 있다. 이러한 도심지 돌발홍수로 인한 피해에 대한 구조적인 대책으로 지하방수로가 효과적인 방안으로 대두되고 있으며, 현재 신월빗물저류배수시설이 설계단계에 있다. 그러나 미국, 일본 등의 국외의 기설치된 지하방수로에서 발생되는 Geyser 현상으로 인한 피해에 대한 연구는 국외에 비해 미비한 편이므로, 선행적으로 Geyser에 대한 물리기반의 동수역학적인 이해가 필요한 실정이다. Geyser는 홍수 시 급격한 유량의 유입으로 단파가 발생하여 지하방수로 내 공기의 압축이 발생하고 수직관을 통해 공기가 물과 함께 지상으로 분출되면서 발생된다. 따라서 공기와 물의 혼합 유동을 모의해야 하며 동시에 단파의 불연속성을 모의하기 위해서는 기존의 상용프로그램으로는 다소 어려움이 있다. 이에 본 연구에서는 지하방수로의 Geyser 현상의 발생 예측을 위해 1차원 Saint-Venant 방정식을 지배방정식으로 선정하였으며, 단파 발생을 수치적으로 안정적으로 모의하기 위해 Roe Approximate Riemann 수치기법을 사용하였다. 또한 공기의 압력항을 고려하기 위해서 수정된 형태의 Preissmann slot 모형을 적용하였다. Geyser 현상의 영향인자로서 지하방수로 수평관의 직경, 마찰계수, 바닥경사, 초기수위, 유입유량을 고려하였으며 상류에서 유입되는 유량에 의한 하류에서의 동수역학적 거동을 분석하였다. 5개의 영향인자의 변화에 따른 단파의 유입속도 및 공기부 압력의 변화를 관찰하여 Geyser 현상에 대한 동수역학적 검토를 수행하였다. 추후 본 연구결과를 적절히 활용한다면 지하방수로의 사용 안정성을 확보하고, 홍수발생 시 모니터링 인자도출에 도움이 될 것으로 예상된다.