• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.787-797
• /
• 2022

The purpose of this study was to confirm the reduction of pain and symptom relief of Parkinson's disease by vertically stimulating the spine through the application of a mechanical bed capable of thermal and massage stimulation. For this purpose, after confirming the segmental motion of the spine due to the use of a medical combination stimulation bed for Parkinson's disease patients, VAS, ODI, gait ability, and spiral drawing tests were performed, and the relationship between the variables was identified. In the 10-day visual analog scale and evaluation of low back pain dysfunction, the average trend of decreasing after bed use was confirmed. For walking ability, a decrease in the moving time and an increase in the moving distance were observed. In the spiral drawing test, the mean test time after using bed was significantly lower than before. As a result, it suggested the possibility of using it as an auxiliary method for recovery and pain relief of Parkinson's disease patients due to spinal segmental movement with mechanical heating and massage. However, this study is a preliminary study, and there is a small number of subjects, so additional research is needed that considers the number and condition of future subjects in detail.

• Clean Technology
• /
• v.16 no.3
• /
• pp.191-197
• /
• 2010

Repair reaction of plasma damaged porous methyl doped SiOCH films was carried out with silylation agents dissolved in supercritical carbon dioxide ($scCO_2$) at various reaction time, pressure, and temperature. While a decrease in the characteristic bands at $3150{\sim}3560cm^{-1}$ was detectable, the difference of methyl peaks was not identified apparently in the FT-IR spectra. The surface hydrophobicity was rapidly recovered by the silylation. In order to induce effective repair in bulk phase, the wafer was heat treated before reaction under vacuum or ambient condition. The contact angle was slightly increased after the treatment and completely recovered after the subsequent silylation. Methyl groups were decreased after the plasma damage, but their recovery was not identified apparently from the FT-IR, spectroscopic ellipsometry, and secondary ion mass spectroscopy analyses. Furthermore, Ti evaporator was performed in a vacuum chamber to evaluate the pore sealing effect. The GDS analysis revealed that the open pores in the plasma damaged films were efficiently sealed with the silylation in $scCO_2$.

• Economic Analysis
• /
• v.25 no.2
• /
• pp.132-176
• /
• 2019

We use a time-varying parameter vector auto regression (TVP-VAR) model to understand the impact of U.S. monetary policy normalization on Korean financial markets and capital accounts. The U.S. monetary policy is represented by the federal funds rate, term premium and credit spread. During the U.S. monetary contraction period of 2004 to 2006, changes in the federal funds rate presented negative pressure on Korean financial markets. The changes in federal funds rate also led to a simultaneous contraction in inward and outward capital flows. However, the effects of a federal funds rate shock has been reduced since 2015. On the other hand, the effects of U.S. term premiums is getting stronger after the period of quantitative easing (QE). The influence of the U.S. credit spread also significantly increased after the global financial crisis. Simulation results show that a rise in the U.S. credit spread, which can be triggered by a contractionary monetary policy, can pose a larger adverse impact on the Korean economy than a rise in the federal funds rate itself. As for capital flows, a U.S. monetary policy contraction causes an outflow of foreign investment, but the repatriation of overseas investment by Korean residents can offset this outflow.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.327-328
• /
• 2022

The recent spread of the corona pandemic and a temporary surge in demand for consumer goods have resulted in an increase in port cargo volume, and the resulting port congestion is coupled with a shortage of labor in the port, exacerbating the global supply chain chaos. Supply chain disruptions will increase logistics costs and ultimately increase global inflationary pressures. In this situation, the role of the port, which is the nodal point between land and sea, is gradually becoming more important. And fully automated ports that are operated unmanned are evaluated as being able to respond stably and flexibly by reducing operational risks in situations such as COVID-19. Therefore, this study compared the operational performance of fully automated and non-fully automated terminals within the same port before and after the corona outbreak, and analyzed the fully automated terminal was stable in actual operation. As a result of the analysis, the fully automated terminal showed stable operating efficiency in all aspects of operational performance compared to the non-fully automated terminal even under severe port congestion due to COVID-19.

• Korean small business review
• /
• v.39 no.3
• /
• pp.57-76
• /
• 2017

While the unemployment rate is rising rapidly due to recent economic recession at home and abroad, university students' reluctance to apply for jobs in Small and Medium Enterprises (SME's) causes instability in manpower supply and demand and social unrest. To provide insights for solving the problem, this study explores how beliefs and attitudes of university students influence their intention to apply for jobs in SME's using Theory of Planned Behavior proposed by Icek Ajzen. This study followed the 2-stage survey methodology suggested by Ajzen. In the first stage of pilot study, a small sample of university students was used to illicit readily accessible behavioral outcomes, normative referents, and control factors. In the second stage of main study, the standard questionnaire was designed and administered and data were collected and analysed using the PLS Structural Equation Modeling (SEM) technique. PLS-SEM was used instead of Covariance Based (CB)- SEM considering the exploratory nature of this study. In overall, the results showed that TPB is very effective in explaining and predicting the university student's intention to apply for jobs in SEM's. Gender turned out to be a significant moderator variable in the relations between intention and its influence factors. Student's scholastic performance showed a negative correlation with intention. More research efforts need to be exerted to better understand university student's job seeking behavior.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.25-39
• /
• 2023

As the scope of supply chains expands globally, unpredictable risks continue to arise. The occurrence of these supply chain risks affects port cargo throughput and hinders port operation. In order to examine the impact of global supply chain risks on port container throughput, this study conducted an empirical analysis on the impact of variables such as the Global Supply Chain Pressure Index (GSCPI), Shanghai Container Freight Index (SCFI), Industrial Production Index, and Retail Sales Index on port traffic using the vector autoregressive(VAR) model. As a result of the analysis, the rise in GSCPI causes a short-term decrease in the throughput of Busan Port, but after a certain point, it acts as a factor increasing the throughput and affects it in the form of a wave. In addition, the industrial production index and the retail sales index were found to have no statistically significant effect on the throughput of Busan Port. In the case of SCFI, the effect was almost similar to that of GSCPI. The results of this study reveal how risks affect port cargo throughput in a situation where supply chain risks are gradually increasing, providing many implications for establishing port operation policies for future supply chain risks.

• Clean Technology
• /
• v.17 no.1
• /
• pp.62-68
• /
• 2011

Hydrodynamic characteristics in multistage annular type fluidized bed (riser: $0.01{\times}0.025{\times}2.8m^3$, J-valve: $0.009{\times}0.015m^2$)were investigated. Glass beads ($d_p=101{\mu}m$, ${\rho}_b=1,590kg/m^3$, $U_{mf}=1.25{\times}10^{-2}m/s$, Geldart classification B) was used as a bed material. Accumulated weight by the electronic balance was measured to determine the solid flow rate in batch-type. In circulation condition, we measured the accumulated weight of particle transported from riser. At the steady state condition, solid circulation rate was calculated from time interval of the heated bed material passing between two thermocouples. Solid flow rate increased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 2.2 to 23.4 kg/s. However, mean residence time decreased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 1,438 to 440 s. The solid holdup in the riser was determined by measuring pressure differences according to the riser height. These results showed a similar trend to that of simple exponential decay type except for the top section of the riser. To verify the gas bypassing from top bubbling beds to middle bubbling beds, $CO_2$ gas was injected by tracer gas in constant ratio, and then was measured $CO_2$ concentration in outlet gas by gas chromatography. Gas bypassing occurred below 2.6% which is negligible value.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.133-149
• /
• 1997

In the metapelites around the Ogcheon granite, the metamorphic grade increases from the biotite zone through the andalusite zone to the sillimanite zone towards the intrusion contact. In the metabasites around the Boeun granite, the metamorphic grade increases from transitional zone between the greenchist and amphibolite facies through the amphibolite facies to the upper amphibolite facies towards the intrusion contact. In the Doiri area locating near the intrusion contact of the Boeun granite, sillimanite- and andalusite-bearing metapelites are found with in 500 m away from the contact. The evidence described above indicates that the Ogcheon and Boeun granites caused low-P/T type contact metamorphism to the country rocks. The P-T condition of contact metamorphism due to the intrusion of the Ogcheon granite is $540{\pm}40^{circ}C, 2.8{\pm}0.9$ kb. The temperature condition of contact metamorphism due to the intrusion of the Boeun granite is $698{\pm}28^{\circ}C$. The wide compositional range of amphibole and plagioclase in the metabasites around the Boeun granite is due to the immisibility gab of amphibole and plagioclase and unstable relict composition resulted from an incomplete metamorphic reaction. The compositional range of stable amphibole and plagioclase decreases as a metamorphic grade increases due to a close of immiscibility gab. The thermal effect of contact metamorphism due to the intrusion of the Ogcheon and Boeun granites, are calculated using the CONTACT2 program based on a two dimensional finite difference method. In order to estimate the thermal effect of an introduced pluton, a circle with 10 km diameter and a triangle with 20 km side are used for the intrusion geometries of the Ogcheon granite and the Boeun granite, respectively. The results from the field and modeling studies suggest that the intrusion temperatures of the Ogcheon granite close to $800^{\circ}C$ and the intrusion temperature of the Boeun granite is higher than $1000^{\circ}C$. However, the intrusion temperatures can be lower than the suggested temperature, if the geothermal gradient prior to the intrusion of the Ogcheon and Boeun granites was higher than the normal continental grothermal gradient.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.259-264
• /
• 2015

For this experiment, specimen was manufactured by injecting polymer and monomer into silicon mold with volume ratio of 2.5:1 based on ISO 20795-2 so that average thickness, width and length of specimen would be maintained as 3.3 mm, 10.0 mm and 65.0 mm, respectively depending on spray on technique. Specimen was divided into 3 groups ($25^{\circ}C$, $40^{\circ}C$, $70^{\circ}C$) depending on polymerization temperature and 10 specimen was manufactured for each group and it was polymerized in water tank of ${\pm}1^{\circ}C$ under the setting condition of polymerization time of 15 minutes and pressure of 3 bar. After keeping specimen in distilled water of $37^{\circ}C$ for over 48 hours before experiment, flexural strength (FS) and elasticity modulus (EM) of specimen being tested by using Intron (3344; Instron; Instron). SPSS ver. 16.0 was used for analysis and post-hoc test of Scheffe was performed after using one-way ANOVA. When comparing mean value of FS of resin for orthodontics, it was represented in the range of 71.500 MPa for $25^{\circ}C$ group, 74.920 MPa for $40^{\circ}C$ group and 76.880 MPa for $70^{\circ}C$ group and difference was shown in the order of $25^{\circ}C$ group <$40^{\circ}C$ group <$70^{\circ}C$ group but such difference was not significant statistically (p=0.052). Result of EM mean value of resin for orthodontics was more polymerization temperature was high, the more was significant difference represented in the order of $25^{\circ}C$ group <$40^{\circ}C$ group <$70^{\circ}C$ group (p<0.039).

• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.26-32
• /
• 1977

Press drying was used on sapwood and heartwood of oak (Qercus acutissima Carruthers) to find profitable means of drying low grade logs. This study was designed to investigate the process of press drying considering core temperature, current moisture content, drying rate, drying time, final moisture content, dimensional change and drying defects. The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$ and pressure of 35psi. The results were summarized as fallows. 1. Core temperature was divided into three stages of drying characterized by initial heating period, plateau temperature, and period of rising core temperature. Plateau temperature of heartwood material was higher and longer than that of sapwood material. 2. The predicting equation for change in drying rate of sapwood material was log y=-2.7925-0.0811x as function of time. That of heartwood material was log y=-3.3382-0.0468x. 3. Sapwood material reduced the moisture content from 59 to 2.5 percent in 45minutes. Heartwood material reduced the moisture content from 64 to 3.3 percent in 55 minutes. 4. Shrinkage during press drying were 20.4 percent in thickness direction and 2.5 percent in width direction. Recovery on equilibrium conditioning at 65 percent relative humidity and temperature of $20^{\circ}C$. were 11.4 percent in thickness direction and 49.4 percent in width direction. 5. Heartwood material developed severe honeycombing and moderate checking. The sapwood material dried without honeycombing, checking and collapse. All material kept wood flat.