The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
/
v.32
no.10
/
pp.27-30
/
2003
배수관내의 공기의 압력변동을 완화시키는 방법의 하나인 통기밸브 등에 대해 소개한다. 배수설비의 목적은 위생기구로부터의 오배수를 건물 밖으로 신속하게 배출함과 동시에 배수관내에 악취성분을 포함하고 있는 오염된 공기가 실내로 침입하여 실내공기가 오염되는 것을 방지하기 위한 역할도 한다. 하수가스의 침입을 방지하기 위해 각종 형상의 배수트랩을 설치하는데, 여러 가지 원인에 의해 트랩내의 봉수는 파괴되기도 한다. 봉수파괴 원인 중에서도 가장 큰 영 향을 미치는 사이 폰 작용에 의한 봉수 파괴는 배수 수직관 및 수평주관내의 공기의 압력변동이 원인(유도사이펀 현상)이 되어 발생하거나 배수자신(자기사이펀 현상)에 의해 발생한다. 배수관내의 압력은 배수부하가 발생한 경우에는 그 배수에 의한 공기의 이동 등에 의해 변동하며, 배수가 없어도 배수관 접속부의 기압변동이나 상승기류에 의해 변동된다.(중략)
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2012.05a
/
pp.515-519
/
2012
A numerical study was performed to observe the relation between internal flow characteristics and operating temperatures in a Lapple cyclone. The present numerical results agree reasonably well with previous experimental and numerical results. As the operating temperature increases, the pressure drop decreases due to decrease of wall shear stress and tangential velocities. A detailed comparison of pressure drops in the cyclone between theoretical prediction models and the present numerical simulations is also presented for wide range of operating temperatures.
Proceedings of the Korean Nuclear Society Conference
/
1996.05a
/
pp.594-601
/
1996
가압기고압력 원자로정지여유도(high pressurizer pressure trip margin)에 영향을 주는 요인들에 대한 민감도 분석을 울진 3,4호기 성능해석코드인 LTCUCN computer code틀 이용하여 수행하였다. 그 결과, 초기 가압기압력, 증기우회제어계통의 quick open지연시간, 터빈우회밸브의 quick opening시간, 원자로출력 감발계통의 용량, 원자로출력감발 제어붕 낙하시간, 가압기 살수작동 설정치 둥이 완전부하상실시 가압기압력을 상승시키는 주요인자임을 알 수 있었으며, 증기우회제어계통 및 가압기살수계통의 용량은 최대 가압기 압력에 미치는 영향이 미미한 것으로 판명되었다. 울진 3,4호기의 참조발전소인 영광 3,4호기의 as-built 자료를 토대로 울진 3,4호기의 원자로정지여유도를 계산한 결과 울진 3,4호기는 완전부하상실사건시 37 psi의 정지여유도를 가질 수 있는 것으로 판단된다. 그러나, 원자로출력감발계통이 있는 ABB-CE type의 울진 3,4호기에서는 완전부하상실사건보다 원자로출력감발계통이 동작하지 않는 부하감발사건이 최대 가압기 압력치를 유발하는 사건이고, 다양한 부하상실사건중에도 운전여유도는 확보하고 있음을 알 수 있었다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.18
no.1
/
pp.345-350
/
2017
Downsizing is widely applied to diesel engines in order to improve fuel efficiency and reduce exhaust emissions. Engine sizes are becoming smaller but pressure and temperature inside combustion chambers are increasing. Therefore, research for fuel spray under high pressure and temperature conditions is important. A constant volume chamber which simulates high temperature and pressure likely to be found in diesel engines was developed in this study. Pressure and temperature were increased abruptly because of ignition of the pre-mixture in the constant volume chamber. Then pressure and temperature were gradually decreased due to the heat loss through the chamber wall. Fuel spray occurred when temperature and pressure were reached at the target condition. In this experiment, the temperature condition should be exactly defined to understand the relation between fuel evaporation and ambient temperature. A fast response thermocouple was developed and used to measure the temporal and spatial temperature distribution during the combustion process inside the combustion chamber. In the results, the core temperature was slightly higher than the bulk temperature calculated by the gas equation. Ed-note: do you want to say 'ideal gas equation'? This was attributed to the heat transfer loss through the chamber wall. The vertical temperature deviation was higher than the horizontal temperature deviation by 5% which resulted from the buoyancy effect.
Internal pressure variation analysis and actual holding time test on ISO LNG tank containers which were made in Korea for the first time according to the special notification of ISO tank container manufacture have been conducted during the transport demonstration projects of the tank containers by tractor, train and ship. The internal pressure of the LNG tank container increased rapidly after LNG filling and dropped during moving the container. However, it was stabilized as time passed and followed the liquid-vapor equilibrium graph. In addition, actual holding time of the tank container was more than 20 days which was satisfied with the special notification of LNG tank container manufacture.
Jang, Kap-Man;Eom, Seok Hwa;Kim, In Chan;Kim, Chung Kyun
Journal of the Korean Institute of Gas
/
v.16
no.6
/
pp.73-79
/
2012
Currently, all domestic CNG vehicles have manual cylinder valves installed. These are inconvenient for drivers in case of a gas leak accident, because drivers have to stop the vehicle operation and manually close the valve. It makes difficult condition for drivers to quickly and properly respond to such accidents. In advanced European countries, they require Automatic cylinder valve installation, which has a structure where the valve is automatically shut off when the driver turns off the ignition in case of a gas leak. If this electric valve system is introduced in Korea, the safety of CNG buses will be improved with better functionalities. In this paper, in order to solve the structural problem of difficulty for a driver to identify the operational status of individual Automatic cylinder valves, an approach was made regarding temperature increase with pressure increase during CNG filling. it was estimated that the temperature increased approximately more than $30^{\circ}C$ due to pressure difference during the filling. Therefore, it was concluded from the experimental data that the valve of the container whose temperature did not increase did not operate, resulting in filling failure.
In this paper, we address the problem of optimal monetary policy rule in the presence of abrupt shifts in the structure of the economy. To do so, we first estimate a Markov switching model for the US housing price inflation, and find evidence supporting the presence of two distinct regimes for the US housing price inflation. One of the two regimes identified appears 'usual', in that housing price inflation negatively responds to higher real interest rate. The other regime is 'unusual', in that the housing price inflation is positively related with real interest rate. We then solve an optimal control problem of the FRB under the presence of the two regimes thus identified. The optimal policy is 'asymmetric' in that the optimal responses in the 'usual' regime require the FRB to lean against the wind to inflationary pressure, while the FRB is recommended to accommodate it in the unusual regime. It is also found that the optimal degree of responses is more conservative when the FRB acknowledges the uncertainty about future regime.
Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.100.1-100.1
/
2015
중이온가속기에서 잔류기체 분자와 가속 이온의 충돌이 발생하면 이온빔 전류의 손실을 야기하는 직접적인 효과 외에 잔류 기체분자 중에서 전리된 이온들이 반발력에 의해 용기 벽에 부딪힐 때 표면에 흡착되어 있던 기체분자들을 충격탈리(stimulated desorption)시킨다. 더 심각한 경우는 산란된 고속 이온이 용기 벽과 충돌하면서 핵반응을 일으켜 방사화 시키거나 벽에서 다량의 기체를 방출시키는 것이다. 최악의 경우에는 고속이온의 에너지에 의해 용기벽이나 부품들이 열적인 손상을 입을 수도 있다. 현재 설계 및 연구개발이 진행중인 기초과학원(IBS) RISP (Rare Isotope Science Project)의 RAON 중이온가속기는 입사기에서 실험영역까지 각 부분의 진공도 조건이 일반적으로 10-8~10-9 mbar 대에 있어서 이온빔 전류의 손실이나 전리 이온들에 의한 충격탈리는 무시할 수도 있지만 고속이온의 기체방출 수율이 ~104 정도로 높은 것을 감안할 때 고속이온의 충격탈리에 의한 압력 증가가 감내할 수준인지 검토할 필요가 있다. 압력증가는 추가적인 손실을 유발하고 이것은 다시 압력을 상승시키는 진공 불안정성(vacuum instability)을 야기할 수 있다는 축면에서 조심하는 것이 좋다고 판단된다. 고속 중이온과 잔류기체 분자와의 충돌에서 이온이 손실되는 반응에는 쿨롬(coulomb) 산란과 전하교환(charge exchange)이 있는데 전자는 후자에 비해 일반적으로 1/10000 가까이 낮아서 무시할 수 있고, 전자 포획(electron capture) 또는 전자 손실(electron loss, 이온의 전리에 해당)로 대별되는 전하교환 반응이 이온 손실을 주도하는 것으로 알려져 있다. 이 연구에서는 다양한 전하교환 반응 단면적을 아우르는 비례칙(scaling law)을 사용하여 대표적인 중이온인 U33+ 및 U79+의 손실 및 잔류 기체의 전리율을 계산하고 충격탈리에 의한 표면방출 및 압력상승을 일차적으로 고려하여 진공도 조건의 타당성을 입증하려고 한다.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
1999.04a
/
pp.44-44
/
1999
전적으로 해외기술에 의존하고 있는 소프트 닙 캘린더 피복의 국산화를 위해 시험 제작 된 소프트 닙 캘린더용 연질롤의 캘린더링 효과를 구명하기 위해서 공정 변수에 따른 신문 용지의 물성변화를 평가하였다. 연질 롤로는 (주)광성고무롤에서 시험제작된 경도 90 Shore D의 것을 사용하였으며, 캘린 더링 시의 압력, 가열 롤의 표면온도, 닙 체류 시간, 유입지의 함수율 변화에 따른 신문용지 의 별크, 평활도, 광택도, 인장강도, 인열강도, 불투명도 변화를 조사하였다. 별크는 캘린더링 시 압력, 가열 롤의 표면온도, 닙 체류시간의 증가에 따라 감소하였다. 가열 롤의 표면온도가 높을수록 별크가 크게 감소되었으며, 닙 체류시간이 짧은 경우에는 1 120 226;C 이하에서 캘린더링을 실시하는 것이 별크 유지에 효과적이었다. 평활도는 가열 롤의 표연 온도, 닙 체류시간이 증가함에 따라 개선되었으며, 선압과 함 수율 증가에 의해서도 상승되는 경향을 보였. 인장강도는 유입지의 함수율, 닙 체류시간, 가열 롤의 표면온도가 모두 상승할 경우 증 가하는 결과를 나타내었다. 이는 함수율 증가에 의해 섬유의 유연성이 향상된 상태에서는 칼렌더링 온도와 닙체류 시간 증가에 의한 섬유의 기계적 변형과 열전달에 의한 섬유의 열 변형이 효과적으로 발생하여 섬유간 결합면적이 증가된 결과로 생각되었다. 인열강도는 소프트닙 캘린더링 후 전반적으로 감소하였으나 캘린더링 온도와 닙체류시 간은 인열강도에 미치는 영향은 적은 것으로 나타났다. 소프트 닙 캘린더링 시 발생하는 인 열강도의 저하를 막기 위해서는 닙 체류시간을 짧게 적용하고 섬유의 열변형이 종이의 표변 에서만 일어날 수 있도록 유입지 함수율과 가열롤의 표면온도를 적절히 조절하는 것이 필요 하리라 판단되었다.광택도는 온도와 압력이 증가할수록 증가하였으나, 닙 체류시간에 따라서는 큰 변화를 나타내지 않았으며 120도씨에서는 닙 체류시간의 증가에 따라 광택도가 오히려 감소하기도 하였다. 불투명도는 벌크와 마찬가지로 압력이 높고 가열롤의 표면온도가 높은 경우 낮게 나타 났다 특히 닙 체류시간의 증가에 따라 감소하는 경향을 보였다.보였다.
Journal of Advanced Marine Engineering and Technology
/
v.38
no.7
/
pp.828-833
/
2014
In this paper, the performance characteristics for newly developed ejector refrigeration system, which is that the part of saturated vapor from liquid-vapor separator after ejector expansion process is entrained in ejector, and the saturated liquid flows in the evaporator and compressed with the rest of vapor in separator, is studied. The reasons of the performance improvement of refrigeration system are that the refrigeration capacity is increased due to quality reduction after iso-entropic expansion process by ejector and the compression work is reduced because of the relatively high pressure of vapor refrigerant before compression process. The comparison results of the ejector system entraining expansion gases with the present residential freezer show that the COP increases to 27.8% maximum in case of the pressure drop to 65% of high pressure of freezer, and to 40.1% for 75% pressure drop of refrigerant R401A. The COP improvement rate with 20%~60% pressure lift in diffuser of ejector is only 2.6%~3%.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.