• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.620-631
• /
• 2022

This paper shows the numerical prediction of the change in oil outflow rate according to the orifice shape of a damaged ship by using the computational fluid dynamics (CFD) analysis method. It also provides discharge coefficients for various orifice shapes to be used in theoretical prediction approaches. The oil outflow from the model ship was analyzed using a multiphase flow method under the condition that the Froude and Reynolds number similitudes were satisfied. The present numerical results were verified by comparing them with the available experimental data. Along with the aspect ratio of the orifice and the wall thickness of the cargo tank, the effects of the orifice shapes defined by mathematical figures on the oil outflow were investigated. To consider more realistic situations, the investigation of the ef ect of the crushed iron plate around the damaged part was also included. The numerical results confirmed the change in oil outflow time for various shapes of the damaged part of the oil tank, and discharge coefficients that quantify the viscous effects of those orifice shapes were extracted. To verify the predicted discharge coefficients, they were applied to an oil spill estimation equation. As a result, a good agreement between the CFD and theoretical results was obtained.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.1
• /
• pp.5-14
• /
• 2023

In this study, the load transfer characteristics of the base and skin of drilled shafts were analyzed and the load sharing ratio was calculated by performing a load transfer large-scale model test and three-dimensional numerical analysis considering the similarity of drilled shafts, which is the design target. From the linear behavior of drilled shafts shown in the large-scale model test and 3D numerical analysis results, the skin load transition curve for the design conditions of this study was proposed by Baquelin et al., and the base load transition curve was proposed by Baquelin et al. For the horizontal load transition curve, the formula proposed by Reese et al. was confirmed to be appropriate. The test value was slightly larger than the numerical analysis value for the axial load at the rock socketing, but the load sharing ratio at the rock socketing increased, on average, about 27.8% as the vertical load increased. The analysis value of the vertical settlement of the pile head under the vertical load was evaluated to be slightly smaller than the test value, and the maximum vertical settlement of the pile head in the model test and analysis maximum vertical load was 10.6 mm in the test value and 10.0 mm in the analysis value, and the maximum vertical settlement value at the base of the pile was found to be a test value of 2.0 mm and an analysis value of 1.9 mm. The horizontal displacement at the head of the column (ground surface) and the head of the pile during the horizontal load was found to agree relatively well with the test value and the analysis value. As a result of the model soil test, the horizontal load measured at the maximum horizontal displacement of 38.0 mm was evaluated to be 24,713 kN, and the horizontal load in the numerical analysis was evaluated to be 26,073 kN.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.781-789
• /
• 2009

The absorption coefficients of the materials used in a 1:50 scale model multipurpose hall were measured based on ISO 354 and related laws. The shape and materials for the scale model were evaluated based on reflective surfaces, variable acoustic elements and sound-absorbing quality (125Hz-1kHz average) of seats. The measured average absorption coefficients of audience seats, audience and orchestra were 0.64, 0.74 and 0,45, respectively, which were simulated with the combination of wood, absorption materials and foam board. Various mounting methods for absorption curtain and banner were considered according to the installation methods. The average absorption coefficient was measured as 0.42, 0.47 and 0.45 in the conditions of Type A mounting, E mounting with 0.9 m backing air cavity, and Type G mounting which is suspended at the ceiling, respectively. It was confirmed that the absorption coefficient was increased at low frequency by backing air gap. The finishing material of stage house was an absorption material covered with thin fabric, which aimed average absorption coefficient of 0.68 by using fiber glass board. Each part of the real materials was compared with those of 1:50 scale model and it was found that the absorption characteristics of both cases were similar.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2206-2217
• /
• 1971

Spillway and discharge channel of reservoirs require the Control of Large volume of water under high pressure. The energies at the downstream end of spillway or discharge channel are tremendous. Therefore, Some means of expending the energy of the high-velocity flow is required to prevent scour of the riverbed, minimize erosion, and prevent undermining structures or dam it self. This may be accomplished by Constructing an energy dissipator at the downstream end of spillway or discharge channel disigned to dissipated the excessive energy and establish safe flow Condition in the outlet channel. There are many types of energy dissipators, stilling basins are the most familar energy dissipator. In the stilling basin, most energies are dissipated by hydraulic jump. stilling basins have some length to cover hydraulic jump length. So stilling basins require much concrete works and high construction cost. Flip bucket type energy dissipators require less construction cost. If the streambed is composed of firm rock and it is certain that the scour will not progress upstream to the extent that the safety of the structure might be endangered, flip backet type energy dissipators are the most recommendable one. Following items are tested and studied with bucket radius, $R=7h_2$,(medium of $4h_2{\geqq}R{\geqq}10h_2$). 1. Allowable upstream channel slop of bucket. 2. Adequate bucket lip angle for good performance of flip bucket. Also followings are reviwed. 1. Scour by jet flow. 2. Negative pressure distribution and air movement below nappe flow. From the test and study, following results were obtained. 1. Upstream channel slope of bucket (S=H/L) should be 0.25<H/L<0.75 for good performance of flip bucket. 2. Adequated lip angle $30^{\circ}{\sim}40^{\circ}$ are more reliable than $20^{\circ}{\sim}30^{\circ}$ for the safety of structures.

• Journal of Global Scholars of Marketing Science
• /
• v.2
• /
• pp.17-37
• /
• 1998

중소기업간 협력 활동은 사업의 전체 혹은 일정 부분에 대하여 분업이나 협업의 관계를 맺는 공동사업의 형태로 나타난다. 기업간 연결의 강도에 따라 기업들간에 형성되는 분업과 협업의 관계를 시장형, 중간조직형, 위계조직형으로 구분할 때, 중소기업간 공동사업은 중간조직형에 속하는 일종의 기업간 네트워크라고 볼 수 있다. 물론 네트워크형의 협력관계를 추진하는 방식도 업무제휴, 지분제휴, 합작투자, 컨소시엄 등으로 다양하다. 그러나 완전한 자본적 통합에 따른 위계적 조직과는 달리 참여기업들이 독립성을 유지하면서, 네트워크 밖의 기업에 대해 경쟁우위를 확보하기 위해 형성한다는 공통점을 가지고 있다. 기업간 협력관계를 통해 참여 기업들이 얻을 수 있는 혜택에 관한 기존연구들은 크게 두 가지로 나누어 볼 수 있다. 하나는 기업의 생산함수를 중심으로 그 이점을 파악하는 것이고 다른 하나는 관계의 종류에 따라 기업간 거래관계를 관리하는 소위 거래비용의 효율성을 중심으로 혜택을 파악하는 접근방법이다. 전자의 접근방법을 따를 때, 기업간 협력의 근본 유인은 규모의 경제(혹은 비경제), 범위의 경제, 집적의 경제, 구도의 경제 등이 협력관계에서 발생하는 혜택의 근본 원천이다. 기술과 제도의 발전, 시장과 경쟁환경의 변화에 따른 기업간 협력의 필요성은 갈수록 증대되고 있다. 소비자들의 요구는 매우 개성화 다양화되고 종합화되는 추세이다. 더불어 기술개발의 비용이 큰 폭으로 증가하고 있으며, 경쟁의 격화로 기술 및 제품의 진부화도 급속도로 이루어지고 있다. 세계화 상품고도화 서비스산업화 정보화 등으로 특징지워지는 새로운 경쟁환경 아래에서 장기적으로 기업의 경쟁력을 향상시키기 위해서는 시장중심적인 관점에서 형성된 기업간 전략적 연계를 바탕으로, 정보의 집적을 통해 다양한 생산성 향상 혹은 관계효율성 향상의 경제를 추구하는 것이 필연적 전제 조건이 되었다. 기업간 경쟁보다는 최종제품의 생산과 판매를 위해 형성된 기업네트워크간의 경쟁이 중시되는 시대인 것이다. 동서간(東西間) 중소기업(中小企業)의 협력(協力)을 새삼스럽게 논의하는 것은 다분히 정치적이라는 느낌을 준다. 경제적인 관점에서 실익이 있음에도 불구하고 동서간 중소기업의 협력이 이루어지지 못하고 있다면, 그 이유는 기업정보의 수집과 유통상의 문제이거나 문화나 기업관행에 대한 잘못된 선입관에서 비롯된 관계 관리비용 계산상의 문제일 것이다. 현실적으로 이 가능성은 매우 낮다. 산업의 발전 정도나 연관성에 있어서 동서축보다는 남북축을 따라 기업간 협력이 이루어질 수 밖에 없는 우리나라의 현재 상황이 동서간보다는 남북간 경제교류를 유도하고 있는 것이다. 동서간 중서기업 협력체제의 구축에 대한 논의가 본질적으로 정치적 관심에서 비롯되었다는 전제 하에, 구축의 방안을 논의하고자 한다. 경제적으로도 타당하면서 정치적으로 관심을 유발할 수 있는 협력체제 구축방안으로, 기업간 네트워크의 조직 주체로서 최근에 논의되고 있는 새로운 형태의 마케팅회사를 동서간에 공동으로 설립할 것을 제안한다. 영구 지속적 공동사업관계보다는 프로젝트별 공동사업을 전제로 기업들 사이의 효과적인 네트워크를 형성함으로써 일종의 가상적 기업을 결성할 필요가 있다. 이러한 기업간 네트워크 형성의 실행주체가 될 수 있는 새로운 마케팅 전문기업의 형태로는 공동회사(空洞會社)(hollow company), 종합상사(綜合商社)(General Trading Company), 거래형 마케팅회사(Marketing Exchange Company), 변환형 마케팅회사(Marketing Coalition Company) 등을 들 수 있다. 양 지역에서는 소비자환경과 기술환경의 특성 및 양 지역의 경제에 대한 파급효과를 고려하여 가장 적합한 마케팅회사의 유형은 선택하여 육성하고, 이를 중심으로 강력한 양 지역 및 다른 지역에 입지한 기업간의 네트워크를 구축하여야 한다. 마케팅회사를 설립하고 완전한 마케팅 서비스를 제공할 수 있도록 육성하기 위해서는 많은 투자가 필요하다. 마케팅회사의 핵심기능 분야인 금융부문, 정보부문, 영업조직 등은 모두 막대한 투자를 필요로하는 기능영역이다. 정보부문은 기술의 발전과 범세계적인 정보관련기관과의 제휴를 통해 독자적인 구축이 어느 정도 가능하나, 영업조직의 구축을 위해서는 기존업체와의 연대가 필수적인 것으로 판단된다. 지속적으로 효과적인 기업간 네트워크를 형성하고 유지하기 위해서는 또한 기업간 관계를 관리하는 방식과 제도 및 수단에 대한 연구가 필요하다. 양 지역 산 학 관의 공동노력을 통해서 새로운 경제 환경에 가장 적합한 기업 형태로 제시된 바 있는 마케팅 전문회사 중심의 기업간 네트워크를 성공적으로 구축한다면, 양 지역 및 국가 경제의 지속적인 동력원이 될 수 있을 것이다

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1061-1071
• /
• 2018

A subsea tunnel, being a super-sized underground structure must ensure safety at the time of earthquake, as well as at ordinary times. At the time of earthquake, in particular, of a subsea tunnel, a variety of response behaviors are induced owing to relative rigidity to the surrounding ground, or difference of displacement, so that the behavior characteristics can be hardly anticipated. The investigation aims to understand the behavior characteristics switched by earthquake of an imaginary subsea tunnel which passes through a fault zone having different physical properties from those of the surrounding ground. In order to achieve the aim, dynamic response behaviors of a subsea tunnel which passes through a fault zone were observed by means of indoor experiments. For the sake of improved earthquake resistance, a shape of subsea tunnel to which flexible segments have been applied was considered. Afterward, it is believed that a D/B can be established through 3-dimensional earthquake resistance interpretation of various grounds, on the basis of verified results from the experiments and interpretations under various conditions. The present investigation performed 1 g shaking table test in order to verify the result of 3-dimensional earthquake resistance interpretation. A model considering the similitude (1:100) of a scale-down model test was manufactured, and tests for three (3) Cases were carried out. Incident seismic wave was introduced by artificial seismic wave having both long-period and short-period earthquake properties in the horizontal direction which is rectangular to the processing direction of the tunnel, so that a fault zone was modeled. For numerical analysis, elastic modulus of the fault zone was assumed 1/5 value of the modulus of individual grounds surround the tunnel, in order to simulate a fault zone. Resultantly, reduced acceleration was confirmed with increase of physical properties of the fault zone, and the result from the shaking table test showed the same tendency as the result from 3-dimensional interpretation.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.2
• /
• pp.1-19
• /
• 2013

This study was carried out to analyze distribution situation of alien plants and to propose management plan in the 3 Folk village in Gyeongsangbuk-do which is Cultural property designated by the State; Hahoe, Yangdong and Hangae. This research is for improve of sincerity of historical site and provide basic information which use about administration of preservation. The results are as follows. 1. Overall flora and alien plants appearance The total flora in the 3 folk villages were listed total 752 taxa including 127 families, 430 genera, 614 species, 5 subspecies, 100 varieties and 33 forms. Among them, woody plants take 263 taxa(35.0%) and herbaceous plants take 489 taxa (65.0%). Flora in the Hahoe, Yangdong and Hangae village were total 534, 479 taxa and 408 taxa and exotic plant index was 30.1%, 38.2% and 37.0% respectively. In types of exotic plants, ornamental exotic plants were 135 taxa, deciduous exotic plants were 21 taxa, cultivating exotic plants were 64 taxa, and naturalized exotic plants were 80 taxa and those result lead that the ornamental exotic plants is the highest ratio. According to the villages, Hahoe village had 161 taxa(30.1%), Yangdong Village had 183 taxa(38.2%), and Hangae village had 151 taxa(37.0%) that Yangdong village showed the most number of exotic plants. 2. Planting of landscape exotic plants in the unit cultural assets Meanwhile, Ornamental exotic plants in old house's gardens in Andong Hahoe village which is designated as a unit assets, those are total 30 taxa; followed by the Okyeon house(8 taxa) is highest and the Yangjindang(7), the Hadong house(6) and the Chunghyodang(5). Magnolia denudata appears the most as for 4 times and Campsis grandiflora etc. each took 2 times. Based on the Yangdong village, Gyeongju, that are found total 51 taxa; followed by the Dugok house(16 taxa) the Sujoldang(14), the Mucheondang(13), and the Sangchunheon (12). High appearance rate of ornamental exotic plants were Viburnum opulus for. hydrangeoides, Lycoris squamigera, Caragagna sinica and Magnolia denudata etc. Based on the Hangae village, Seongju, that are designated total 62 taxa; followed by the Jinsa house(35 taxa), the Gyori house(25), the Hanju head family house(20), and the Hahoe house(16). Taxa with high appearance rates were Caragana sinica, Juniperus chinensis var. horizontalis, Magnolia denudata, Viburnum opulus for. hydrangeoides, Chaenomeles speciosa etc. 3. Problems of exotic plant landscapes in the outer spaces of the folk villages Problems of exotic plant landscapes in the outer spaces of the Hahoe village are as follows. In lower of the Mansongjeong forest, Ambrosia artemisifolia, which are ecosystem disturbance plants designated by the Ministry of Environment, live with high dominance value. This should be have a remove with Sicyos angulatus immediately. In the Nakdong river bed around the Mansongjeong forest is covered with a riparian vegetation forest belt of Robinia pseudoacacia L. forest, Populus nigra var. italic community, and Populus x tomentiglandulosa community colony. Based on the Yangdong village, the planted or naturally distributed Ailanthus altissima colony, sporadically distributed Robinia pseudoacacia as well as Amorpha fruticosa are detected all over the village and ecotones. Based on the Hangae village, Ailanthus altissima and Robinia pseudoacacia are sporadically distributed around the village and there is a sign of spreading. similarity of exotic plantsis 47.0% to 48.6% and a reason why this happened is all of research site in Gyeongsanbuk-do and that is why growth norm of plant is similar, exotic plant which is sales for ornamental and it infer to require related countermeasure of each villages and joint related countermeasure.