• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.369-376
• /
• 2006

Similarity rule in order to predict the field settlement and consolidation time from oedometer test is not clear because of the thickness, loading time, rate of loading increase, dependence on strain inherent of clay. To investigate the one-dimensional consolidation tests with permeability tests varied loading period and specimen thickness were carried out the application of similarity rule. Main conclusions are 1) f(=1+e)-logk line is a unique property of the soil, 2) $c_{\nu}$, k need no correction, 3)similarity rule is depends on the positions of f-logp line and primary consolidation line.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.208-215
• /
• 2003

지진하중에 대한 구조물의 동적 거동과 성능을 예측 평가하기 위하여 실험적 방법들이 흔히 사용되고 있으나, 실험장비의 제약과 구조물의 규모 등으로 대부분 축소모형실험에 의존하고 있다. 그러나 일반적인 상사법칙(similitude law)은 탄성범위에서 유도된 것으로 지진거동과 같은 비탄성 거동을 예측하는 경우에는 한계가 있다. 또한 탄성범위 내에서도 크기효과(size offset)가 발생하므로 축소모형의 실험결과를 원형 구조물에 직접 적용하는 것은 많은주의가 필요하다. 본 연구에서는 원형 구조물(prototype)과 축소모형(scaled model)을 모두 실험 대상으로 하여 실제 축소모형만을 실험하여 원형 구조물의 거동을 예측하는 경우의 문제점을 확인하고 그 해결방법을 모색하고자 한다. 실제로 축소모형실험에서는 원형 구조물의 경계조건을 정확히 재현하기 어려우며, 실험모형의 제작과정과 실험과정에서의 모든오차가강성의 변화로 반영되어 나타난다. 따라서 본 연구에서는 기하학적 상사율과 변화된 강성비(stiffness ratio)를 함께 고려하여 고유진동수의 오차를 보정하고 비탄성 거동중에도 직접적인 실험결과의 비교가 가능한 상사법칙을 제안하였다. 더불어 제안된 상사법칙을 적용한 유사동적실험 (pseudodynamic test)을 수행하여 실험오차보정(experimental error compensation)효과를 검증하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.455-456
• /
• 2009

Although pseudo-dynamic test and shaking table test have been performed using small scale models to evaluate the seismic performance of RC structures, researches on similitude law are not sufficient. This study presents a reasonable similitude law for improvement of economical efficiency and reliability.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.292-292
• /
• 2016

논의 배수특성 분석은 물꼬 크기 및 개소수, 배수로 구성, 규모, 경사, 재질 등과 같은 물리적 특성 인자들의 영향으로 인해 일반적인 유역의 홍수량 산정을 위해 사용되는 수문학적 홍수추적 방법의 적용이 어렵다. 따라서 논에서의 유출을 모의하기 위해서는 수리학적 홍수추적 방법의 적용이 필요하며, 기존의 연구들은 대부분 1차원과 2차원의 수치 해석 기법으로 논의 유출 특성을 분석해왔다. 3차원 수치 해석 기법을 적용할 경우 1차원과 2차원에서 볼 수 없는 유동 특성 등을 파악할 수 있으며, 보다 정확한 유출 모의가 가능할 것으로 기대된다. 하지만 3차원 해석은 비교적 구조가 단순한 논에 적용하기에는 시간과 비용이 과도하게 소모된다는 단점이 있다. 한편, 상사법칙은 주로 실험의 스케일을 줄이기 위해 적용되어 왔다. 정확성에 대한 검증이 이루어진다면, 시간이 오래 걸리는 3차원 모델링에 상사법칙을 적용할 경우, 모의 시간을 단축시킬 수 있는 장점이 있을 것으로 사료된다. 따라서 본 연구에서는 3차원 수치 해석 모형인 FLOW-3D를 이용하여 논에서의 유출을 모의하고, 적용성을 평가하고자 한다. 또한 상사법칙을 이용하여 모의 시간을 단축할 수 있는 방법을 제시하고자 한다. 모의 대상으로 40m x 100m의 논 포장을 구성하였으며, 강우 및 관개에 따른 유출을 모의하였다. 모의 결과는 실측치 및 기존 연구의 결과와 비교하여 적용성을 평가하였다. 또한 수리학적 상사법칙을 적용하여 조건을 변화시켜가며 유출을 모의하였고, 모의 조건 및 모의 시간 변화에 따른 정확성을 분석하였다. 본 연구에서 제시한 방법은 논에서의 유출 모의의 정확성을 향상 시켜, 홍수 발생 시 농경지의 침수 대책 마련에 기여할 수 있을 것으로 기대된다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.49-57
• /
• 2003

Although there are several experimental techniques to evaluate the seismic behavior and performance of civil structures, small-scale models in mast of physical tests, instead of prototypes or large-scale models, would be used due to a limitation on capacities of testing equipments. However, the inelastic seismic response prediction of small-scale models has some discrepancies inherently because the similitude law is generally derived in the elastic range. Thus, a special attention is required to regard the seismic behavior of small-scale models as one of prototypes. In this paper, differences between prototypes and small-scale models pseudodynamically tested on steel column specimens are investigated and an alternative to minimize them is suggested. In general, small-scale models could have the distorted stiffness induced from some experimental errors on test setup, steel fabrication and so on. Therefore, a modified similitude law considering both a scale factor for length and a stiffness ratio of small-scale model to prototype is proposed. Using the modified similitude law to compensate experimental errors, the pseudodynamic test results from modified small-scale model are much improved as compared with the results of prototype. According to the pseudodynamic test results of small-scale steel models, it can be concluded that the modified similitude law proposed could be effective in simulating the seismic response of prototype structures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.55-61
• /
• 2009

In this paper, a thrust prediction method for a developing vertical launching missile is proposed through considering a verified vertical launching missile(a baseline missile) as a model. In order to predict thrust profile of a developing vertical launching missile, both Similarity law and Pi theory are applied to the model. By comparing prediction results based on the 6-DOF program of a baseline missile with simulation results of a developing vertical launching missile, the proposed method has been indirectly verified.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.313-318
• /
• 2004

When plan breakdown by permeation of fill dam, bank by original decision scale model test of sound, original decision scale model test of sound that destroy having used water was carried out. And original decision scale model test of sound that use viscous fluid is carried out, but doubt remains in experiment result in state that verification of law of similarity is not achieved. In this study, verified according to Modeling of Models' method effecting law of similarity to use n ship horoscope solution of water.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.119-120
• /
• 2010

Recently, for evaluate seismic performance, pseudo-dynamic test and shaking table test are experimented through using small scaled model to relief restriction, though, reserch about similitude law are insufficient. In this study, propose adequate similitude law for improve economical efficiency and reliability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.701-708
• /
• 2009

The flight control law of developed flight control computer(DFLCC) is developed based on operation flight program of advanced trainer aircraft full scale development final configuration. The flight control law design is used common use development tool in GUI(Graphic User Interface) environment. The flight control law transformed to C-Code is reflected in OFP. The OFP is verified by the standardized verification process. But, before standardized verification process, we need preliminary verification process such as similarity of flight control law and reliability of developed HILS. Similarity of flight control law is verified by comparing the aircraft response of advanced trainer aircraft and those of the developed control law. Also, reliability of developed HILS is verified by comparing the aircraft response of HILS and Non-real time simulation result. This paper verifies similarity of developed control law and reliability of HILS environment as comparing aircraft response.

• Explosives and Blasting
• /
• v.25 no.1
• /
• pp.53-65
• /
• 2007

When doing a blasting demolition on RC structures made of scale models, scale model members considering both a proper scale factor and mechanical characteristics of materials have to be similar to prototype RC members to analyze the collapse behavior of RC structures. In this study. a similitude law considering the density of prototype materials is calculated. Both mix of concrete and arrangement of reinforcement have been described referring to Concrete Standard Specification as well as Design Standard of Concrete Structure. The scale factor on scaled concrete models considering maximum size of coarse aggregate is about one-fifth of a cross section of prototype concrete members. A scale factor on staled steel bar models is about one-fifth of a nominal diameter of prototype steel bar. According to the mechanical test results of scale models, it can be concluded that the modified similitude law may be similar to compressive strength of prototype concrete and yield strength of prototype steel bar.