• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.401-407
• /
• 1996

A 2-bay 2-story moment-resisting reinforced concrete plane frame with seismic detail was designed. One 1/2.5-scale and one 1/10th model subassemblages were manufactured accoring to the required similitude law. Then the reversed load tests under the displacement control were performed statically to these subassemblages. The results of these tests were compared regarding to the similitude in the characteristics of structural behaviors such as strength., stiffness, energy dissipation, failure modes and local deformations. Based on these results, the following conclussions were drawn : (1) The strength of 1/10 model was very similar to that of 1/2.5 specimen. (2) The initial stiffness of 1/10 model appers to be approximately 2/3 of that of 1/2.5 specimen. (3) 1/10 model has therefore smaller energy dissipation capacity than 1/2.5 specimen. (4) Inelastic excursion mechanisms of 1/2.5 specimen and 1/10 model apper to be a little different.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.41-46
• /
• 2004

This paper describes a study on the tearing damage of a ship's bottom plating, during a grounding. It is widely known that different scaling laws are applied for bodies undergoing simultaneous plastic flow and crack propagation in the deformation of plate tearing. Specifically, the basic scaling law is not followed for the fracture. In this study, in order to verify the problem, plate cutting experiments for geometrically similar models have been performed. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models. A simplified analytical method for the estimation of tearing is proposed, based on the experiments. It has been observed that the results of the present formula are highly correlated with the experiments.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1517-1520
• /
• 2000

최근 인터넷 및 정보 통신 기술이 급속하게 발달함에 따라서 네트워크를 기반으로 한 응용 소프트웨어 및 네트워크 관련 기술들이 많이 연구, 개발되고 있다. 이와 관련하여 과거 인공지능 분야에서 많이 연구되어 왔던 에이전트 기술이 최근의 네트워크 기술을 기반으로 하여 다시 활발한 연구가 진행되고 있다. 이러한 에이전트 기술을 이용하여 본 논문에서는 일반 비서업무 중에서 상사의 스케줄 관리를 대행할 수 있도록 하는 비서 에이전트 시스템 모델을 설계하고 그 구성 기법을 기술한다. 본 논문에서 기술하는 비서 에이전트 시스템은 3-tier 구조하에 각 비서 에이전트의 스케줄 자료 처리 및 이를 이용한 판단 능력을 효과적으로 분석하기 위해서 데이터베이스 시스템과 지식기반 시스템이 유기적으로 결합되어 운용된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.374-377
• /
• 2017

A cold-flow test equipment was designed to carry out the performance verification of TDACS. For that purpose, the pressure dynamics in the solid rocket motor combustor and the cold-flow test was modeled, and the response time showing the dynamic characteristics of each model was obtained. In this paper, the system response time of the cold-flow test was designed to be equal to that of the motor, making the dynamic response in cold-flow and hot gas condition to be similar.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.47-57
• /
• 1999

The small-scale models have been utilized for the prediction of inelastic behavior of reinforced concrete structures for several decades. The parameters that affect the similitude between the model and prototype are various. Among them, the effect of bond between the model reinforcement and the model concrete is one of the most important factors. The study reported herein is addressed to verifying this similitude in bond behavior. The simple beams which have the lap splice at the midspan were made and flexural tests were performed under two-point loading. The length of lap splice are varied from 0.4ld through 0.7ld and up to 1.0ld where ld is the development length of the reinforcement. The selected scales are 1/1, 1/5, 1/10 and 1/12. Two prototype specimens and three models were tested in addition to the associated material tests and the test results are compared from the viewpoint of similitude.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.77-84
• /
• 1999

The XX company that is handling the class IV hazardous materials, located in Bu-Chon City and the LPG station in front of the XX company which is about 20 meters apart, was chosen as the standard model for this study In carrying out the consequence analysis, PHAST and Super-Chems were used for the study and utilizing the output of the simulation, we have evaluated the consequences throughout the probit analysis and explosion overpressure analysis. In case of Acetone, the effect distance of the damage on facilities-that is the result of radiation heat flux of $37.5kW/m^2$ by TNO model-is 68.51m by PHAST model and 40.93m by Super-Chem model. The risk assessment of the LPG station which is based on the explosion resulted as the analysis of the fire ball showed the diameter 125.2m, the height 206.2m and the duration 11.28sec and the effect distance for the radiant heat flux $37.5kW/m^2$ was 137.0m.

• Journal of Arbitration Studies
• /
• v.16 no.3
• /
• pp.53-89
• /
• 2006

At its thirty-second session(Vienna, 17 May-4 June 1999), the UNCITRAL decided that the priority items for the Working Group(Arbitration and Conciliation) should include enforceability of interim measures and the requirement of written (on for the arbitration agreement. The Working Group, at its forty-third session(Vienna, 3-7 October 2005), it had undertaken a detailed review of the text of the revised article 17 of UNCTTRAL Model Law on International Commercial Arbitration, and it had resumed discussions on a draft model legislative provision revising article 7, paragraph (2) of UNCITRAL Model Law. The purpose of this paper is to make research on the contents and issues of the draft legislative provisions on interim measures and preliminary orders, and on the form of arbitration agreement which the Working Group discussed and adopted at its forth-fourth session(New York, 23-27 January 2006). The draft legislative provisions on interim measures and preliminary orders are composed of the following provisions : Article 17-power of arbitral tribunal to order interim measures; article 17 bis-conditions for granting interim measures; article 17 ter-applications for preliminary orders and conditions for granting preliminary orders; article 17 quater-specific regime for preliminary orders; article 17 quinquies- modification, suspension, termination; article 17 sexies-provision of security; article 17 septies-disclosure; article 17 octies-costs and damages; article 17 novies recognition and enforcements; article 17 decies-grounds for refusing recognition or enforcement; article 17 undecies-court-ordered interim measures. There are the following issues in the draft legislative provisions on interim measures and preliminary orders : form of issuance of an interim measures in article 17(2); conditions for granting interim measures in article 17 bis; purpose, function and legal regime of preliminary orders in article 17 ter; obligation of arbitral tribunal to give notice, and non-enforceability of preliminary orders in article 17 quater; burden of proof, interplay between article 17 decies and article 34, and decision on the recognition and enforcement of the interim measures in article 17 decies; placement of article 17 undecies; amendment of scope exception of application in article 1(2). The draft legislative provisions on the form of arbitration agreement are composed of the following provisions : article 7(1) definition of arbitration agreement; article 7(2) arbitration agreement in writing; article 7(3) arbitration agreement if its terms(content) are (is) recorded in any form; article 7(4) arbitration agreement by an electronic communication; article 7(5) arbitration agreement in an exchange of statements of claim and defence; article 7(6) reference to any document containing an arbitration clause. There are the following issues in the draft legislative provisions on the form of arbitration agreement : arbitration agreement in writing in article 7(2); terms or contents of arbitration agreement in article 7(3); arbitration agreement by electronic communication in article 7(4); existence of arbitration agreement in article 7(5); reference to any document containing an arbitration clause in article 7(6); the alternative proposal on article 7; amendment to article 35(2).

• Korea Trade Review
• /
• v.41 no.5
• /
• pp.15-39
• /
• 2016

Over the past couple of decades, we can see the emergence of a new lex mercatoria. It consists of international conventions or treaty, model laws and international principles. And such new lex mercatoria is driven by the international institutions such as UNCITRAL, UNIDROIT and ICC. The international convention and international principles in the field of international commercial transaction are considered : UN Convention on Contracts for the International Sale of Goods(CISG) and The UNIDROIT Principles(PICC Principles). The former is the statue law for the latter, and the latter sometimes supports the former as an interpretation and supplementation of CISG. So, the purpose of this article is to evaluate and investigate the current status of CISG and PICC Principles in terms of application and interpretation principles. The results are as follows. First, PICC are used for the interpretation and supplementation of international law such as CISG, but CISG is a law, not a rule. Second, CISG and PICC Principles are not often chosen when parties chose the law governing their contract. The parties very often chose a national law ; the number of the parties choosing CISG and PICC Principles as a governing law was very low.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1165-1172
• /
• 2009

The laminar boundary layer along a streamwise corner formed by two flat plates intersecting at right angle is measured by using Particle Image Velocimetry(PIV) technique. The free stream velocity ranges from 2.96m/s to 3.0m/s. The angle of incidence of the corner is set to 1.2 degree providing slightly favourable pressure gradient to ensure a laminar flow in the corner region. A round shape leading edge is used and the length of the model is about 1000mm. In the bisector plane, the measurement data show separation type velocity profiles having an inflection point which is a typical characteristic of laminar corner boundary layers. As the distance away from the bisector plane increases, velocity profiles are found to change into the Blasius profile. The change completes around half length of the boundary layer thickness in the bisector plane away from the bisector plane along the plate. In the bisector plane, the growth characteristic of the boundary layer thickness and the approximate similarity of velocity profiles are confirmed from the measurement data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.323-334
• /
• 2020

Since boundary layer transition has a significant impact on the aero-thermodynamic performance of hypersonic flight vehicles, capability of accurate prediction of transition location is essential for design and performance analysis. In this study, γ-Re_θt model is improved to predict transition of hypersonic boundary layers and validated. A coefficient in the production term of the intermittency transport equation that affects the transition onset location is constructed and applied as a function of Mach number, wall temperature, and freestream stagnation temperature based on the similarity numerical solution of compressible boundary layer. To take into account a Mach number dependency of transition onset momentum thickness Reynolds number and transition length, additional correlation equations are determined as function of Mach number and applied to Re_θc and F_length correlations of the baseline model. The suggested model is implemented to a commercial CFD code in consideration of practical use. Analysis of hypersonic flat plate and circular cone boundary layers is carried out by using the model for validation purpose. An improvement of prediction capability with respect to variation of Mach number and unit Reynolds number is identified from the comparison with experimental data.