Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

An Experimental Study on the Estimation of the Plate Tearing Damage

판의 찢김 손상 추정을 위한 실험 연구

  • Published : 2004.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes a study on the tearing damage of a ship's bottom plating, during a grounding. It is widely known that different scaling laws are applied for bodies undergoing simultaneous plastic flow and crack propagation in the deformation of plate tearing. Specifically, the basic scaling law is not followed for the fracture. In this study, in order to verify the problem, plate cutting experiments for geometrically similar models have been performed. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models. A simplified analytical method for the estimation of tearing is proposed, based on the experiments. It has been observed that the results of the present formula are highly correlated with the experiments.

Keywords

References

  1. 대한조선학회논문집 v.31 no.1 좌초시 선저보강판의 손상 에 관한 연구 백점기;현명현;이탁기
  2. 대한조선학회논문집 v.33 no.3 판의 찢김응답에 대한 치수 및 동적 효과 백점기;이탁기
  3. Fracture and Fatigue Control in Structures(2nd ed.) Barsom,J.W.;Rolfe,S.T.
  4. An Investigation of Impact Scaling Theory, in 'Structural Crashworthiness' Calladine,C.R.;N.Jones(ed.);T.Wierzbicki(ed.)
  5. Scaling of Inelastic Structures Loaded Dynamically in Structural Impact and Crashworthiness Jones,N.;G.A.O.Davies(ed.)
  6. J. of Ship Research v.31 no.4 A Study of Plate Tearing for Ship Collision and Grounding Damage Jones,N.;Jouri,W.S.
  7. Int. J. of Mech. Science v.32 no.4 On the Cutting of a Plate by A Wedge Lu,G.;Calladin,C.R.
  8. J. of Ship Research v.38 no.4 Cutting of a Longitudinally Stiffened Plate by a Wedge Paik,J.K.
  9. Int. J. of Impact Engineering v.21 no.8 An Experimental Study on the Scaling of Plate Cutting Shen,W.Q.;Fung,K.W.;Trinatafyllo,P.;Wajid,N.M.;Nordin,N.
  10. Int. J. of impact Engineering v.21 no.5 Plasticity, Fracture and Friction in Steady-state Plate Cutting Simonsen,B.C.;Wierzbicki,T.
  11. J. of Ship Research v.24 no.2 The Tearing Strength of Mild Steel Plate Vaughan,H.
  12. Int. J. of Mech. Science v.35 no.3/4 Closed-form Solution for Wedge Cutting Force Through Thin Metal Sheets Wierzbicki,T.;Thomas,P.
  13. J. Marine Structures v.15 Plate Tearing and Bottom Damage in Ship Grounding Zhang,S.