• Communications for Statistical Applications and Methods
• /
• v.2 no.2
• /
• pp.387-394
• /
• 1995

반복수가 같은 이항 블럭계획(binary equireplicate block design)에서 조화 행렬의 구조는 불완비 블럭계획의 분류 및 분석에 사용된다. 조화행렬의 구조에 의하여 몇 가지 상반부류 수가 3인 부분적으로 균형된 불완비 블럭계획이 상반부류 수가 2인 부분적으로 균형된 불완비 블럭계획으로 퇴화되는 상반 조건을 보였다. 또한 처리 수가 6인 삼각형 계획의 상반관계를 이용하여 그룹분해 가능 계획의 배치계획을 구성할 수 있음을 보였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.104-112
• /
• 2014

The counter-rotating approach on wind turbine has been recently put in interest for its certain advantages in both design and performance. This paper introduces a study on a counter-rotating wind turbine designed and modeled using NREL airfoils S822 and S823. The aims of the study is to evaluate and discover the performance of the counter-rotating system, and compares to that of single rotor turbine of same design using numerical simulation. The results show higher performance of the counter-rotating system compared with single rotor case at TSR 3 to 5 but lower performance at higher TSR. This is due to the interaction between upstream and downstream rotors. Thus, the counter-rotating turbine is more efficient at low rotor rotational speed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.44-48
• /
• 2000

퍼지 집합은 경계가 애매한 집단, 어떤 제약에 대한 만족정도가 애매한 개체들의 모임, 또는 애매한 개념을 소속정도를 이용하여 표현한다. 퍼지 집합에서는 자신의 나타내는 개념이나 제약에 대해서 무관한 개체나 상반되는 개체에 대해서도 소속정도 값으로 0을 부여한다. 응용에 따라서는 집합이 나타내는 개념이나 제약에 대해서 무관한 것과 상반되는 것을 구별하여 표현하는 것이 유용한 경우도 있다. 이 논문에서는 퍼지 집합에서 소속정도값 0을 갖는 무관한 원소들과 상반되는 원소들을 구별하여 표현하기 위해 소속 정도값의 영역을 구간 [-1, 1]로 확장한 바이폴라 퍼지집합이라는 확장된 퍼지 집합을 소개한다. 한편, 바이폴라 퍼지 집합에 대한 집합연산, 퍼지정도 척도, 관계, 추론 등의 연산에 대해서도 소개한다.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.373-375
• /
• 2003

상반회전 풍력발전 시스템의 경우 전방에 위치한 로터의 후류 효과를 적절히 반영하여 설계에 이용해야 한다. 본 연구에서는 이러한 로터의 후류효과 및 블레이드의 실속후 모델을 고려하여 30kW급 상반회전시스템의 설계형상에 대한 검토연구를 수행하였다 기본공력이론은 모멘텀 이론과 2차원 준정상 공기력 이론을 통합한 형태를 사용하였다. 로터의 후류영향을 고려하기 위해 축소형 풍차 블레이드 모델에 대한 풍동시험 결과를 적절히 이용하며, 이로부터 보조로터를 지난 후류의 축속도 및 각속도 성분을 결정하였다. 최종적으로 상반회전 시스템의 로터 반경 및 상호 이격거리 등을 고려한 성능해석을 수행하고 이로부터 최적 설계형상에 대한 파라미터 연구결과를 제시하였다.

• 순환기질환의공학회:학술대회논문집
• /
• 2002.11a
• /
• pp.36-37
• /
• 2002

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.647-652
• /
• 2016

Guided waves can be used for the inspection of long range pipelines. Surface corrosion is often found as a major defect type in pipelines. The reciprocity relation is a well-established theorem by which one can simplify complicated mathematical expressions. The approach has been already applied to plate and half-space structures to obtain the closed-form solutions of scattered amplitude. However, results for the case of cylindrical structures have not been reported yet. In this paper, the scattering of torsional waves, which is widely used in commercial applications, is explored by the reciprocity theorem approach. Obtaining closed-form solutions of the amplitudes of propagating waves is much simplified by using the reciprocal relation. The scattered amplitudes for elliptical and rectangular defect shapes are calculated with respect to defect depth and width, at frequencies between 0 and 500 kHz. The amplitude shows the periodic result as a function of frequency. The derived closed-form solutions can play a significant role in quantitative signal interpretation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.866-870
• /
• 2011

In this paper, the aerodynamic forces of a Korean Traditional Bangpae Kite with the wind hole and spanwise curved dihedral were measured by wind tunnel test. For the flat plate kite without the wind hole, the stall presents at ${\alpha}=35^{\circ}$ with $C_{Lmax}$=1.2. The Korean Traditional Bangpae Kite with the wind hole had $C_{Lmax}$=1.05 at ${\alpha}=30^{\circ}$ without the apparent stall phenomena. As the wind hole size growing, the lift and drag of kite were changed slowly after stalling angle of attack. As increasing the leading edge dihedral angle, lift curves were more increased than drag curves. As the growing of wind hole size, the effect of dihedral angle was constant affect to the lift and drag of kite.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.1-9
• /
• 2015

In this paper, a study on facial movements are analyzed in terms of opposite emotion stimuli by image processing of Kinect facial image. To induce two opposite emotion pairs such as "Sad - Excitement"and "Contentment - Angry" which are oppositely positioned onto Russell's 2D emotion model, both visual and auditory stimuli are given to subjects. Firstly, 31 main points are chosen among 121 facial feature points of active appearance model obtained from Kinect Face Tracking SDK. Then, pixel changes around 31 main points are analyzed. In here, local minimum shift matching method is used in order to solve a problem of non-linear facial movement. At results, right and left side facial movements were occurred in cases of "Sad" and "Excitement" emotions, respectively. Left side facial movement was comparatively more occurred in case of "Contentment" emotion. In contrast, both left and right side movements were occurred in case of "Angry" emotion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.793-798
• /
• 1996

In this paper, output compliance effects at RCC point by both redundant joint compliances and antagonistic torques generated by internal preloading between joints of a spherical 3 degree-of-freedom mechanism are investigated. For this purpose, kinematic analysis is briefly described. Then, output compliance models at RCC point, which is generated by redundant joint compliances and by internal preloading between joints are derived. Finally, ranges of output compliance modulation due to these redundant joint compliances and antagonistic torques are examined through simulation.

• Korean Journal of Ichthyology
• /
• v.24 no.3
• /
• pp.151-159
• /
• 2012

Cross and reciprocal hybrids from intrageneric crosses between Rhodeus uyekii and R. notatus were analyzed morphometrically using truss and classical dimensions, erythrocyte size using blood smears, and cytogenetically using flowcytometry, then compared with the parental species. Although the morphometric assessment based on body proportions indicated that the hybrids were generally intermediate between the maternal and paternal species, the morphometric characters of cross and reciprocal hybrids included at least 14 paternal-like and 7 maternal-like, and 13 paternal-like and 5 maternal-like characters, respectively (P<0.05). The pigmentation of the hybrids was intermediate in some respects, and resembled that of the parental species. The DNA content of the cross and reciprocal hybrids, based on flow cytometry analysis, was significantly different from the parental species. The characterization of morphometric traits and the cytogenetic analysis of hybrids of R. uyekii and R. notatus used in this study may be useful for distinguishing genotypes in commercial Acheilognathinae aquaculture.