• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.85-94
• /
• 2006

Triaxial tests at isotropic confining pressure of 200 kPa were carried out to show the undrained shear behavior of artificially cemented sands, which were cemented by gypsum, and the influences of relative density and DOC (degree of cementation) were investigated from the results. The yield strength, the elastic secant modulus at yield point and the peak frictional angle of cemented sands increased abruptly compared to uncemented sands, and it was checked that cementation exerts more influence on the behavior of sand than the relative density. But after breakage of the cementation bonds, the relative density was more important factor on the behavior of sand than the cementation. Because the compressibility md the excess pore pressure of cemented sands were reduced due to the cementation bonds, the effective stress path of cemented sands was going toward to the total stress path of uncemented sands. The cementation of sand restricted the dialtion of sand at the pre-yield condition, but induced more dilation in the post-yield condition.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.211-220
• /
• 2021

Land Surface Temperature (LST) is one of the useful parameters to diagnose the growth and development of crop and to detect crop stress. Unmanned Aerial Vehicle (UAV)-based LST (LSTUAV) can be estimated in the regional spatial scale due to miniaturization of thermal infrared camera and development of UAV. Given that meteorological variable, type of instrument, and surface condition can affect the LSTUAV, the evaluation for accuracy of LSTUAV is required. The purpose of this study is to evaluate the accuracy of LSTUAV using LST measured at ground (LSTGround) under various meteorological conditions and growth phases of garlic crop. To evaluate the accuracy of LSTUAV, Relative humidity (RH), absolute humidity (AH), gust, and vegetation index were considered. Root mean square error (RMSE) after minimizing the bias between LSTUAV and LSTGround was 2.565℃ under above 60% of RH, and it was higher than that of 1.82℃ under the below 60% of RH. Therefore, LSTUAV measurement should be conducted under the below 60% of RH. The error depending on the gust and surface conditions was not statistically significant (p-value < 0.05). LSTUAV had reliable accuracy under the wind speed conditions that allow flight and reflected the crop condition. These results help to comprehend the accuracy of LSTUAV and to utilize it in the agriculture field.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.286-289
• /
• 1986

항법(navigation)은 기준좌표계에 대한 항체(vehicle)의 위치나 속도를 알아내기 위한 것으로 이를 위한 시스템이 관성항법장치(inertial navigation system-INS)이며 항법기능을 수행하기 위하여 항체에 놓여진 쎈서의 관성성질을 이용한다. INS는 specific force와 관성 각속도의 측정에서 얻은 데이타를 처리함으로 그 기능을 수행한다. 스트랩다운 INS(SINS)는 관성항법장치의 한 종류로 analytic INS라고도 하는데 기준좌표축을 유지하기 위하여 안정테이블을 사용하지 않고 쎈서들을 항체에 직접 부착시켜 초기상태와 현재상태와의 사이에 상대적인 회전방향을 해석적으로 계산한다. INS의 성능은 수많은 오차원(error source)의 함수로 주어지며 이 오차원 중에는 주위환경에 의한 것도 있고 INS 구성에 사용된 기구(instruments)와 관련된 것도 있다. INS 를 해석하는 목적은 항법의 정확도를 알아보는데 있으며 또한 각각의 오차원의 값을 추정하는 것도 부가적인 목적이 된다. 이러한 오차의 추정치는 사양(specification)을 모르는 부품의 성능을 식별하는데 사용될 수 있다. 따라서 INS를 해석함으로 INS를 구성하는 어떤 부품에 대한 성능이 어느정도 개선을 필요로 하는가 알 수 있다. 본 논문에서는 SINS의 오차원을 크게 고도계의 불확실성, 중력의 편향과 이상, 가속도계의 불확실성, 자이로의 불확실성의 네 그룹으로 나누어 상호분산해석(covariance analysis)방법으로 각 오차원이 시스템에 미치는 영향을 알아보았다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.257-266
• /
• 2001

It was set up MCS and MS of ship's distance measuring system in land and ship respectively and ship's track including dropped and hove up anchor was tracked by mean of measurement for ship's position, relative bearing and distance from MCS to MS. Results analyzed for possibility of real time anchoring watch and effectiveness of measuring position are as follow; (1) The elapsed time from dropped anchor to hove up anchor is 4 minutes and the elapsed time to start recording ship's track after set up anchoring state is 10 minutes approximately. (2) Shape of hull's swing during anchoring is mostly 8 figue-like or rarely peanut-like shape. (3) Mean anchoring position during whole measuring time was shifted 49m north and 89m eastly. (4) Ship's track were moved counter-clockwise for $8.1^\circ$ range from relative bearing $186.1^\circ$ to $194.2^\circ$ ellipse-like tracks with the major axis 63m and the minor axis 53m. (5) High frequency of ship's position distribution was shown at relative bearing $187^\circ$ and distance 558m while low frequency was shown at relative bearing $194^\circ$ and distance 556m. (6) The designed ship's distance measuring system by PRTK-GPS was fit very well for anchoring watch as secured necessary area demanded for dragging anchor as well as anchoring by means of real time measurement both in distance and bearing.

• The Korean Journal of Applied Statistics
• /
• v.34 no.3
• /
• pp.427-438
• /
• 2021

Two-stage sampling allows us to estimate population characteristics by both unit and cluster level together. Given a complex auxiliary information, integrated calibration weighting would better reflect the level-wise characteristics as well as multivariate characteristics between levels. This paper explored the integrated calibration weighting methods by Estevao and Särndal (2006) and Kim (2019) through a simulation study, where the efficiency of those weighting methods was compared using an artificial population data. Two weighting methods among others are shown efficient: single step calibration at the unit level with stacked individualized auxiliary information and iterative integrated calibration at each level. Under both methods, cluster calibrated weights are defined as the average of the calibrated weights of the unit(s) within cluster. Both were very good in terms of the goodness-of-fit of estimating the population totals of mutual auxiliary information between clusters and units, and showed small relative bias and relative mean square root errors for estimating the population totals of survey variables that are not included in calibration adjustments.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.96-105
• /
• 2019

Automobile shredder residue (ASR) is the final waste produced when end-of-life vehicles (ELVs) are shredded. ASR can be separated using mineral-processing operations such as comminution, air classification, magnetic separation, and/or electrostatic separation. In this work, trajectory analyses of conductors (copper) and non-conductors (glass) in the ASR have been carried out using induction electrostatic separator for predicting or improving the ASR-separation efficiency. From results of trajectory analysis for conductors, the trajectories of copper wire by observation versus simulation for coarse particles of 0.5 and 0.25 mm showed consistent congruity. The observed 0.06 mm fine-particles trajectory was deflected toward the (-) attractive electrode owing to the charge-density effects due to the particle characteristics and relative humidity. In the case of non-conductors, the actual trajectory of dielectric glass deflected toward the (-) electrode, showing characteristics similar to those of conductive particles. The analyses of stereoscopic microscope and SEM & EDS found heterologous materials (fine ferrous particles and conductive organics) on the glass surface. This demonstrates the glass decreasing separation efficiency for non-ferrous metals during electrostatic separation for the recycling of ASR. Future work will require a pretreatment process for eliminating impurities from the glass and advanced trajectory-simulation processes.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.355-364
• /
• 1995

A heavy fluid is injected to a rotating cylindrical container of flat or inclined bottom filled with homogeneous lighter fluid. Continuous flow-in and spreading patterns over the bottom of the container are observed and at the same time upper-layer motions induced by the movement of the heavy fluid are traced by thymol blue solution. Regardless of bottom geometry, the injected denser fluid is deflected toward "western wall" and continuous its path along the boundary with radial spreading which occurs in the bottom boundary layer to make a quite asymmetric flow. When the bottom contains a slope(${\beta}$-plane), increased pressure gradient causes the fluid move faster to produce a stronger Coriolis force. This makes the width of the flow narrower than that of f-plane. But, when the denser flow reaches the southern part of the container, a local-depth of denser fluid increases (much greater than the Ekman-layer depth) such that the spreading velocity along the wall is reduced and the interfacial slope increases to make the upper-layer adjust geographically to have oppositely directed upper-layer motion along the interfacial boundary. The role of the denser fluid in terms of vorticity generation in the upper-layer is such that it produces local topographic effect over the western half of the container and also induces vortex-tube stretching which is especially dominant in the f-plane.

• Proceedings of the Korean Statistical Society Conference
• /
• 2000.11a
• /
• pp.207-212
• /
• 2000

본 연구는 최근의 사회조사와 선거자료를 이용하여 한국사회의 지역주의의 특징을 살펴보고자 한다. 첫째, 최근의 선거결과에 보이는 지역주의적 투표는 지역간 사회적 거리를 잘 보여주고 있다. 둘째, 이러한 사회적 거리는 '편견과 차별'의 형태로 다양한 일상생활에서 존재하고 있다. 많은 사람들은 이러한 편견을 믿고 있으며, 편견에 의한 지역적 차별을 경험하고 있다. 특히 이러한 경험은 특정지역(호남)과 관련되어 있다. 셋째, 이러한 정치적 측면(지역주의적 투표)과 사회적 측면(지역간 편견)을 선거제도와 연결하여 살펴봄으로써, 앞으로 한국사회의 정치제도의 변화에 대한 전망을 할 수 있다. 연구의 잠재적인 가정은 선거에 있어서 지역적인 투표가 무조건 '나쁜' 것만은 아니라는 것이다. 한국 정치에서 나타나는 지도자나 이데올로기의 편향은 많은 사람들로 하여금 투표나 선거에서 출신지를 중요한 요소로 삼게 하였다. 이러한 요소는 쉽게 사라지지는 않을 것이며, 앞으로 선거제도의 변화에 중요한 역할을 할 것이다. 이러한 예측은 세 가지 중요한 요소에 근거하고 있다. 첫째, 유권자들의 지역주의에 대한 믿음과 예측은 쉽게 사라지지 않을 것이다. 둘째, 정치지도자들은 지역주의를 선거와 관련한 자신의 이익을 위해서 최대한 이용할 것이다. 셋째, 지역주의에 근거한 유권자들의 성향은 최근 선거와 투표에서 더욱 강화되고 있다. 정치엘리트들이 지역적인 기반을 중심으로 결합하려는 경향이 강해지고 있다. 이러한 경향은 이들 정치엘리트 사이의 내각중심제에 대한 선호도와 지역당의 출현 가능성을 증가시킬 것이다.도 설치행위의 처분성과 관련하여 횡단보도의 설치행위와 같은 일반적인 명령을 항고소송의 대상으로 할 필요성이 존재한다면 이른바 독일에서의 일반처분이라는 개념을 무리하게 받아들여 이를 행정행위의 한 유형으로 한다거나 우리 판례와 같이 "직접적이고 구체적인 법적 효과"를 미치는 명령이라는 명확치 않은 기준에 의하여 처분성을 인정하기보다는 일반적인 명령과 개별적인 행정행위를 구분하고 명령에 대하여도 취소소송의 대상으로 삼도록 하는 보다 명확하고 일관성 있는 논의전개를 제안하였다.수 있었다.로 첨가하여 48시간 배양한 후 암항원 유전자 발현성을 측정한 결과 세포주에 따라 다소 차이는 있으나 대개 0.2 uM농도에서도 유전자 발현이 유도되었으며 1, 5 uM농도에서 매우 강하게 유도되었다. ADC 처리가 페암세포주의 MHC와 B7 발현을 증가시키는가를 알아보기 위해 1 uM 농도의 ADC를 72시간 처치한 후 FACS 분석을 실시한 결과 4개의 페암세포주에서 MHC 및 B7분자의 발현은 유도되지 않았다. 또 ADC농도가 세포성장에 미치는 영향을 알아보기 위하여 ADC를 0.2, 1, 5 uM농도로 96시간 처치 후 세포수를 측정하여 상대성장지수를 알아본 결과 ADC 처치 농도가 증가함에 따라 세포의 성장은 매우 감소하였다. 결론: 폐암세포주에서 ADC처치는 MAGE, GAGE 및 NY-ESO-1과 같은 세포독성 T 림프구 반응을 유도할 수 있는 암항원의 발현을 증가시킬 수 있으며, ADC의 세포독성과 항원 발현 유발시간을 분석할 때 1 uM 농도에서 48시간 처치한 후 ADC가 없는 배지에서

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.64-70
• /
• 2018

In this study, eleven major coastal areas were selected and the climate environment and the greenhouse direction were analyzed. This research investigates the greenhouse heat loss according to the wind environment at target areas. The target areas were selected based on heated greenhouse cultivation area and wind environment standard. Temperature, wind speed, and wind direction among weather data for 30 years were collected and analyzed. The data were divided into the minimum, average, and maximum temperatures and the Meteorological Agency criteria applied to the weather and wind direction criteria. Data were collected in the range of $0{\sim}180^{\circ}$ considering the symmetry of the shape of the greenhouse. In addition, the wind direction is different for each region and the applied wind direction can be different when referring to the longitudinal direction of the greenhouse and the data are collected in the range of $0{\sim}90^{\circ}$. The results of this study are expected to be used to calculate the heating load of greenhouse installed in places wind speed high.

• Korean Journal of Cognitive Science
• /
• v.27 no.3
• /
• pp.407-420
• /
• 2016

We live under the consequences of countless decisions, among which significant number of decisions is made by representatives acting on behalf of us. However, individuals often make disparate decisions depending on which identity they are assigned as an agent or with which opponent they are interplaying. In the current research, behavioral discontinuity depending upon actor identity and social relationship was investigated using the ultimatum game. Participants behaved in a more economically rational way when they acted as a group representative compared with when they made decisions as a private individual. However, the direction of the individual-representative discontinuity was reversed when rivalry came into play. Furthermore, more fairness was requested to accept the offers in the interaction with the rival compared with the neutral countergroup. Especially when interacting with the rival group, participants showed contrasting level of decision bias - measured by rejection rate toward unfair offers - according to the degree of mind attribution to the opponent. Specifically, the greater participants attributed a mind to the rival group, the more they rejected the unfair offers from it. The present research is important in that it provides insight into individuals' decision-making in a group context, which sometimes forgoes the financial gain of the entire group and ultimately leads to the sub-optimization of social welfare.