• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.115-118
• /
• 2003

높은 정밀도를 갖는 상대위치결정은 매우 정밀한 반송파 측정값을 이용하며, 단기간에 높은 정밀도를 얻기 위해서는 미지정수가 결정되어야 한다. 본 논문에서는 LAMBDA 방법을 이용하여 이중차 미지정수를 해결하는 알고리즘을 정립하고, L1 반송파를 이용하여 상대위치를 결정하는 프로그램을 개발하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1032-1039
• /
• 2012

The present paper deals with precise relative positioning of formation satellites with long baseline in low Earth orbit making use of L1/L2 dual frequency GPS carrier phase measurements. Kinematic approach means to describe the motion of objects without taking its mass/dynamics model into consideration. The advantage of the kinematic approach is that information about dynamics of the system is not applied, which gives more flexibility and could improve the scientific interest of the observations made by the mission. The ionosphere terms, which are not canceled by double differenced measurement equation in the case of the long baseline, are explicitly estimated as unknown parameters by extended Kalman filter. The estimated float ambiguities by EKF are solved by existing efficient integer vector search strategy under integer least square condition. For the integer vector search, we employ well known MLAMBDA. Finally, The feasibility and accuracy of processing scheme are demonstrated using the GPS measurements for two satellites in low Earth orbit separated by baselines of 100 km.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1846-1855
• /
• 2015

In this paper, a precise relative positioning with TD(time differenced) carrier phase measurements from a low-cost GNSS(Global Navigation Satellite System) receiver is proposed and analysed. The proposed method is using carrier phase measurement from a single GNSS receiver that reference receiver is not required and stand alone positioning is possible. TD operation removes the troublesome integer ambiguity resolution problem, and if the time interval is short, other error, such as, ionospheric, tropospheric delay and ephemeris error are effectively eliminated. The error analysis of the proposed method shows that a precise and positioning with carrier phase is possible. The implemented system is evaluated using a real car experiments. The results show that the horizontal positioning error was less than 3m during 10 minutes experiments, which is 4 times more precise than the results of normal code based absolute positioning.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.523-529
• /
• 2016

본 연구에서는 전산유체역학을 이용하여 고 레이놀즈수에 유동에서의 탠덤 에어포일에 대한 상대 위치 인자 연구를 진행한다. 탠덤형 날개의 경우 앞뒤 날개의 유동간섭이 날개 성능에 중요한 영향을 미친다. 본 연구에서는 이를 2차원 탠덤 에어포일로 고려하여 유동간섭을 확인한다. 유동간섭에 따른 에어포일 성능을 분석함으로써 뒤 에어포일의 상대 위치를 결정할 수 있으며, 본 연구결과는 실제 탠덤 날개 형태의 항공기 설계에 유용하게 이용될 수 있을 것으로 기대된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.181-188
• /
• 1996

Geodetic Satellite Positioning Techniques (NNSS, Transit, Doppler, VLBI, SLR etc.) still have much difficulty in surveying and necessity of point positions is being amplified in korea. Therefore some research institutes have being investigated point positioning using the GPS. In this study, 1 arranged the theory deal with point positioning using GPS carrier beat phase of dual frequency and estimated corrections of errors that be included in GPS observable. Also, 1 determined point position by the differencing scheme of GPS carrier phase, and analyzed the accuracy of point position. 1 suggested potentiality of geodetic point positioning using GPS carrier phase by comparing result of relative positioning with result of point positioning and analyzing result of network adjustment fixed any point position.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.5-12
• /
• 2010

A novel algorithm which computes the orientations and the locations of mobile robots with repeating feature of ceiling textures is proposed. For orientation computation, the relative angle between a strait line on a ceiling image and the center line of the robot is firstly computed. The relative angle is added to the global reference angles of straight lines of the ceiling and a group of robot orientation candidates is composed. The robot orientation is determined from such orientation candidate group by choosing the closest one to the previous robot orientation. Similarly, the location of the robot is determined from the robot location candidate group by choosing the closest one to the previous robot location, where robot location candidate group is composed by adding the relative location of the robot to global locations of neighboring nodes of the previous robot locations. The experiment has been done to test the accuracy of the algorithm in computing locations and orientations.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.283-290
• /
• 2008

Satellite formation flying can provide the platform for interferometric observation to acquire the precise data and ensure the flexibility for space mission. This paper presents development and verification of an algorithm to estimate the baseline between formation flying satellites. To estimate a baseline(relative navigation) in real time, EKF(Extended Kalman Filter) and UKF(Unscented Kalman Filter) are used. Measurements for updating a state-vector in Kalman Filter are GPS single difference data. In results, The position errors in estimated baseline are converged to less than ${\pm}1m$ in both EKF and UKF. And as using the two types of Kalman filter, it is clear that the unscented Kalman filter shows a relatively better performance than the extended Kalman filter by comparing an efficiency to the model which has a non-linearity.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.529-536
• /
• 2008

Researches about 3-D Positioning system using GPS were carried out many-sided by national organs, laboratories, the worlds of science. And most of researches were development of relative positioning algorithm and its applications. Relative positioning has a merit, which can eliminate error in received signals. But its error increase due to distance of baseline. GPS absolute positioning is a method that decides the position independently by the signals from the GPS satellites which are received by a receiver at a certain position. And it is necessary to correct various kinds of error(clock error, effect of ionosphere and troposphere, multi-path etc.). In this study, results of PPP(Precise Point Positioning) used Bernese GPS software was compared with notified coordinates by the NGII(National Geographic Information Institute) in order to analyze the positional accuracy of permanent GPS sites. And the results were compared with results of AUSPOS - Online GPS Processing Service for comparison with relative positioning.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.290-291
• /
• 2013

Ab initio DFT 계산을 통해서 $Si/SiO_2$ 계면의 Band offset을 계산 했다. Si과 $SiO_2$ 각각의 물질을 계산한 결과로 얻은 로컬 퍼텐셜을 기준으로 Valence band와 Conduction band의 band edge의 위치를 결정할 수 있다. 그리고 계면 계산으로 얻은 로컬포텐셜을 이용하여 두물질의 로컬 퍼텐셜의 상대적인 위치를 결정할 수 있고 이를 이용하여 Band offset을 결정 할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.1017-1027
• /
• 2000

In this paper, we propose a new coding method based on the distance between vertex segments for vertex positions in the vertex-based shape coding. The pixel lines are divided into the segments of a fixed length, and the segments that have vertex pixels are called vertex segments. We analyze the probability distribution of the relative distance between vertex segments and prove that it depends only on the ratio between the number of vertices and the number of segments. Considering the coding efficiency and implementation complexity, we choose a particular ratio to make a code table. For each input image, the segment size is chosen according tothe ratio, and the relative segment distances are entropy coded. It is shown that the proposed method is efficient for the images with many vertices.