• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.499-505
• /
• 2012

The purpose of this study was to find out the difference of radiation dose value through energy, exposure number, fluoroscopy time, the number of days of exposed scatter X-ray when TLD and OSLD is used in diagnostic radiology. The difference of value were measured by relative ratio and interval. Energy makes high relative ratio of TLD($1.81{\pm}0.41$) than OSLD($1.40{\pm}0.26$), exposure number makes high of OSLD($1.40{\pm}0.26$) than TLD($2.10{\pm}0.10$). There are no significant differences between relative ratio of TLD and OSLD in fluoroscopy time and the number of days of exposed scatter X-ray. But interval of relative ratio in the number of days of exposed scatter X-ray was narrowed in less 0.2. That means, the measurement of scatter X-ray could more confident in TLD and OSLD than the measurement of direct ray. In conclusion, we have to recognize the relative ratio of TLD and OSLD could be vary depending on exposed condition of radiation. And in some cases, double test of TLD and OSLD get more creditable results of dose value.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.28.1-28.1
• /
• 2010

이 연구에서는 기존 선형 상대운동방정식에 차등중력, 주위성의 이심율, J2 섭동 등의 비선형항을 추가하여 보다 정확한 상대운동방정식을 만든 후 섭동이론을 적용하여 위성편대 연료최적화 재배치 문제에 대한 근사 해석해를 구하고자 한다. 먼저, 비선형 섭동항을 테일러 급수를 이용하여 2차항까지 전개한 후, 이를 기존 선형상대운동방정식에 추가하여 새로운 비선형 상대운동방정식을 만든다. 이 때 사용된 선형상대운동방정식은 힐스 방정식으로 주위성의 궤도가 일반적인 타원이고 위성 간 상대거리가 충분히 가깝다고 가정한다. 최적화 조건으로부터 상태벡터와 라그랑지 곱수로 이루어진 연립 미분방정식이 만들어 지는데, 이 식은 힐스 방정식에 기인한 선형부분과 2차 비선형항에 기인한 섭동부분으로 나뉜다. 이 때, 이 연립미분방정식의 해는 선형부분의 해와 섭동으로 인한 변화량의 합으로 근사할 수 있으며 그 변화량은 섭동이론을 적용하여 얻을 수 있다. 이와 같이 얻어진 해는 여러 섭동의 비선형항을 2차까지 포함한 상대운동방정식을 사용했기 때문에, 기존 선형상대운동방정식을 사용하여 구한 최적해 보다 더 정확한 결과를 얻을 것이라 예상한다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.226-233
• /
• 1997

예망어구의 유체역학적인 특성과 예망어구내에서의 유속 측정 자료를 기초로 어류의 측선 유수감각에 작용하는 유효한 유수자극량을 추산하고 정량화하기 위하여 예망어구내의 3차원적인 상대유속의 선형적인 분포정도를 모델링하였다. 예망어구내의 상대유속은 망지의 제반규격과 예망어구의 수중 전개형상에서의 각부 거리비에 따라 상대유속비를 선형적으로 수식화하여 본문의 식(3)과 (8)로 표현하였다. 이러한 상대유속비는 어류의 측선 유수감각기관에 의하여 탐지될 수 있는 와동 유수자극량의 지표로써 사용될 수 있다. 어류의 유수감각 예민도는 어류의 전장과 어체주위 상대유속에 의하여 선형적으로 변화되는 것으로 가정하고 본문의 식(9)와 같이 탐지가능한 상대유속차의 최소값으로 나타내었다. 예망어구내의 상대유속 분포에 관한 본 모델의 계산 결과는 실물예망어구에서 실측된 상대유속의 범위내에서 거의 근사하게 나타났으며 본 모델은 어류의 대망행동 모델링에서 예망어구의 유수자극과 어류의 유수감각 예민도를 상대적으로 정량화하여 어류행동의 반응요인으로 적용할 수 있을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.302-309
• /
• 2017

The influence of the pile diameter, center to center pile spacing, internal friction angle of embankment soil, and height of embankment on the arching efficacy of the embankment pile was investigated. The arching efficacy, which was derived by the arch model developed in the embankment soil was calculated using two methods, one that considers crown failure of the arch and the other that considers load on the pile cap and critical relative spacing ratio for which the arching efficacy calculated by the two methods are the same. According to the computed results in this study, the arching efficacy calculated from a consideration of the load on pile cap governs when the relative spacing ratio becomes smaller and that calculated from the theory of crown failure governs when the relative spacing ratio becomes larger. The critical relative spacing ratio below which the arching efficacy calculated from a consideration of the load on pile cap governs the design decreases with increasing value, which is defined by the ratio of the pile diameter to the pile center to center spacing. Critical relative spacing ratios, which correspond to the values of 0.5 and 0.2 were 0.35 and 0.85, respectively. Considering the computed results, the critical relative spacing ratio decreases with increasing Rankine passive earth pressure coefficient and critical relative spacing ratios, which correspond to values of 5 and 2, were 0.23 and 0.85, respectively. The arching efficacy, which corresponds to the area ratio of 9%, was 54% and the one that corresponds to the value of 3 was 61%; the critical relative spacing ratios, which correspond to those arching efficacies, were greater than 0.5.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.3
• /
• pp.135-142
• /
• 1998

본 연구는 초유동 콘크리트용 모르타르의 물/결합재비 및 고성능 감수제 첨가율에 따른 상대플로우 면적비와 상대깔대기 속도비의 상관관계를 실험으로 검토한 것이다. 구속수비 실험결과, C급 플라이애쉬>F급 플라이애쉬 > 석회석분순으로 나타났기 때문에 F급 플라이애쉬 및 석회석분은 유동성 개선에 효과적인 것으로 나타났다. 또한 모르타르 실험결과, 상대플로우 면적비와 상대깔대기 속도비는 고성능 감수제 첨가율이 일정할 경우 물/결합재비의 변화에 따라 원점을 지나는 직선관계로 나타났지만, 물/결합재비가 일정할 경우에는 고성능 감수제 첨가율의 변화에 따라 원점을 지나는 곡선관계로 나타났다. 따라서, 수식화 모델은 Rm= A. m0.4가 합리적이며, 최적값인 ( m .Rm)=(5.1)을 만족하는 배합조건은 플라이애쉬의 경우 치환율 30%, 물/결합재비 83%이며, 석회분의 경우 치환율30%, 물/결합재비 77%로 판명되었다.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.196-203
• /
• 2022

This paper contributed to the understanding of the effect of the blade relative position on performance of micro gravitational vortex turbine in free water surface. In a constant vortex flow, the rotation, voltage and current of micro vortex water turbine were measured according to the position change of the blade installed at the relative vortex height (y/h_v) ranging from 0 to 0.778 below the free water surface. The flow rate ranged from 0.0063 to 0.00662 m³/s. The results of the experiments showed that relative positions of the blade affected the performance of vortex water turbine because the distributions of incoming flow velocity and turbulence intensity were changed. The highest amount of the energy generated by the vortex water turbine occurred in the relative vortex height ranging from 0.111 to 0.222. The output power at the relative vortex height of 0.111 was about 2.4 times larger than the relative vortex height of 0.588 below the free water surface.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.13-21
• /
• 2002

An extensive tension experiment was carried out to examine the variation of tensile strength in moist sand having moisture contents in the range of 0.5% < w < 4.0% with newly developed direct tension apparatus. It was observed that tensile strength of sand varied as functions of moisture content, relative density, presence of fines, and level of precompression. Tensile strength increases with increasing moisture content and fines, and this trend is more noticeable at increasing relative densities. However, the influences of relative density and fines on the tensile strength are substantially dependent on the water content. These effects are reduced at low moisture levels (w < 0.5%). The precompression effects also depend on the water content but less on the duration and level of the precompression.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.515-523
• /
• 2018

In order to obtain consistent change detection result for multi-temporal satellite images, preprocessing must be performed. In particular, the preprocessing related to the spectral values can be performed by the radiometric normalization, and relative radiometric normalization is generally utilized. However, most relative radiometric normalization methods assume a linear relationship between the two images, and nonlinear spectral characteristics such as phenological differences are not considered. Therefore, this study proposes a relative radiometric normalization which assumes nonlinear relationships that can perform compositive normalization of radiometric and phenological characteristics. The proposed method selects the subject and reference images, and then extracts the radiometric control set samples through the no-change method. In addition, spectral indexes as well as pixel values are extracted in order to consider sufficient information, and modeling of nonlinear relationships is performed through multilayer perceptron. Finally, the proposed method is compared with the conventional relative radiometric normalization methods, which shows that the proposed method is visually and quantitatively superior.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.1
• /
• pp.79-91
• /
• 2017

An experimental study has been conducted by using the Cyclic Direct Simple Shear apparatus to evaluate the influence of average and cyclic shear stresses on the undrained shear failure behavior of marine silty sand considering various relative densities. The obtained results show that despite using different relative densities, similar trends were gained in the cyclic shear deformation. Moreover, the cyclic shear deformation is affected mainly by the average and cyclic shear stresses. The number of cyclic loads for failure is significantly affected by the cyclic shear stress ratio and relative density, and is less affected by the average shear stress ratio. The proposed three-dimensional stress-dependent failure contour can be used effectively to assess the soil shear strength considering various relative densities in the design of foundation used for offshore structures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.1-7
• /
• 2006

In the present study, A 3-D chimera technique for overlapped bodies in relative motion is studied using unstructured meshes. If all node points of a mesh element at solid boundary are in another body, this element is excluded from computational domain. For computation of unsteady flow, non-active cells have proper variables using interpolation and extrapolation. These variables are used in next time step. The motion of a launching trajectory ejected from a wing and the motion of deploying fins of a trajectory which have not been simulated are computed to conform practicality of this technique.