• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.73-74
• /
• 2010

The objective of this research is to improve the flexural capacity of RC Beams. To delay prematured tension failure of concrete specimen and to improve flexural capacity of RC beam by increasing the contribution of FRP strengthening plates, a method for inserting a laminate to the interface between concrete and FRP materials. This method makes it possible to increase overall flexural performance of RC beam by FRP plate compared to normal RC beams and RC beam strengthened by bonded FRP plates. The new bonding technique is applicable to all types of reinforcement available FRP laminate, and in principle is also applicable to materials other than FRP.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.1
• /
• pp.44-53
• /
• 2006

In this study, the non-destructive computed tomography was adopted to observe the density profile of the needle-punched Carbon/Carbon(C/C) composites nozzle throat. The density profile of C/C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.145-147
• /
• 2003

시간이 흐름에 따라 위치가 연속적으로 변경되는 객체를 이동 객체(Moving Objects)라고 한다. 이러한 이동 객체의 대용량 궤적 정보를 효율적으로 검색하기 위해서 색인이 필요하며 대표적인 색인으로 TB-tree가 있다. 그러나 전통적인 공간 색인인 R-tree 기반의 TB-tree는 엄격한 궤적 보존 정책에 의해 레코드가 삽입될 때마다 해당 레코드의 선행자(predecessor)를 포함하는 단말 노드를 검색해야 하며, 레코드 삽입으로 인한 단말 노드 MBB의 변경을 해당 단말 노드에서부터 루트 노드까지 반영해야하는 갱신 부하를 가지고 있다. 본 논문에서는 대용량 궤적 정보의 효율적인 색인을 위한 TB-tree 갱신 기법을 제안한다. 본 기법은 앞으로 삽입될 이동 객체의 궤적을 포함하는 예상된 MBB(EMBB: Expected Minimum Bounding Box)를 트리에 먼저 반영한다. 그 후 새로운 레코드가 삽입될 때마다 중간 노드의 MBB를 갱신하지 않고, 삽입되는 레코드의 MBB가 EMBB을 벗어났을 때 EMBB를 재설정하여 실제로 삽입된 레코드의 MBB와 재설정된 EMBB를 포함하도록 중간 노드의 MBB를 조정하므로 TB-tree의 MBB 조정 횟수를 줄인다. 또한 TB-tree에 선행자를 포함하는 단말 노드를 직접적(direct)으로 접근하기 위하여 별도의 선행자 테이블(Predecessor Table) 구조를 두어 레코드 삽입을 위해 선행자를 포함하는 단말 노드의 검색비용을 줄여 전체적인 색인 갱신 비용이 감소된다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.113-119
• /
• 2013

The transient liquid phase (TLP) bonding was used to fabricate autogenous joints in a magnesium alloy AZ31 with the aid of a pure Ni interlayer. A $13{\mu}m$ thick pure Ni foil was used in order to form a Mg-Ni eutectic liquid at the joint interface. The interface of reaction and composition profiles were investigated as a function of bonding time using a pressure of 0.16 MPa and a bonding temperature of $515^{\circ}C$. The quality of the joints produced was examined by metallurgical characterization and the joint microstructure developed across the diffusion bonds was related to changes in mechanical properties as a function of the bonding time.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.2
• /
• pp.73-79
• /
• 2012

We developed the carbon fabric/EPDM chamber insulation in order to protect motor case with high intensity gas flow. A six-inch simulation motor connected with extension tube was designed to test ablation characteristic of insulation. High intensity gas flow was induced by a FRP disc with hole between motor and extension tube. After ground test, ablation depth of the carbon fabric/EPDM insulation was decreased compared to another insulations after ground static test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.85-91
• /
• 2011

We developed carbon fabric/EPDM chamber insulation in order to protect motor case with high intensity gas flow. Six-inch simulation motor connected with extension tube was designed to test ablation characteristic of insulation. High intensity gas flow was induced by FRP disc with hole between motor and extension tube. After ground test, ablation depth of carbon fabric/EPDM insulation was decreased compared to another insulations after ground static test.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.18-25
• /
• 2014

A implanted sensor's error probability is more likely to external sensor's error probability by biological characteristic in WBAN. In this paper, we present method that external sensor transmits frame instead of doing implanted sensor's retransmission for improving lifetime of implanted sensors in WBAN. The proposed method, LI(Lifetime Increment) protocol is to add external sensor's id in transmission data frame of a implanted sensor. When the retransmission is required, external sensor that have to registered id in data frame retransmits frame instead of implanted sensors' retransmission. The comparison result shows that the proposed protocol reduces power consumption and improves life time.

• Proceedings of the KWS Conference
• /
• 1997.05a
• /
• pp.204-210
• /
• 1997

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.275-278
• /
• 2017

과거의 가장 흔한 공격이었던 코드 삽입 공격은 방어 기법이 발전함에 따라 점점 어려워지고 있다. 공격자는 코드를 삽입하지 않고도 공격할 수 있는 방법을 찾기 시작하였고, 공격 대상에 존재하는 코드를 연결하여 원하는 동작을 실행하게 만드는 코드 재사용 공격을 하기 시작했다. 코드 재사용 공격을 막는 방어 기법 역시 제안되었지만, 다시 이를 우회하는 발전된 코드 재사용 공격들도 나오면서 공격과 방어를 거듭하고 있다. 본 논문에서는 코드 재사용 공격의 전신인 return into libc 부터 Data Oriented Programming (DOP)까지의 공격과 방어를 정리하고, 코드 재사용 공격이 발전되는 과정을 살펴보는 것을 목표로 한다.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.48-50
• /
• 2004

TLP 접합 공정에서 모재와 삽입금속 사이에서의 확산을 통하여 액상 삽입금속은 고온에서 등온으로 유지 시 등온 응고된다. D.S.Duvall은 느린 가열시 매우 빠른 속도로 가열 시 보다 낮은 온도에서 dissolution이 완료되고 응고가 발생할 것으로 예상하였다. (중략)