• Korean Journal of Food Science and Technology
• /
• 제48권4호
• /
• pp.341-346
• /
• 2016

The AMY2B gene, encoding human pancreatic ${\alpha}$-amylase isozyme (HPA II), was expressed in Pichia pastoris, and the effects of chloride ions on HPA II activity toward starch substrates were investigated. As seen with chloride ion-dependent ${\alpha}$-amylases-including HPA I, the isozyme of HPA II-chloride ions increased enzyme activity and shifted the optimal pH to an alkaline pH. The activity enhancement by chloride was more significant at pH 8 than that at pH 6, suggesting that the protonation state of the general acid/base catalyst of HPA II was important for the hydrolysis of starches at an alkaline pH because of the increase in its $pK_a$ by chloride ions. The turnover values for cereal starches as the substrates markedly increased in the presence of chloride by up to 7.2-fold, whereas that for soluble starch increased by only 1.7-fold. Chloride inhibited substrate hydrolysis at high substrate concentrations, with $K_i$ values ranging from 6 to 15 mg/mL.

• Korean Journal of Food Science and Technology
• /
• 제24권3호
• /
• pp.240-246
• /
• 1992

Preparation of soybean oil fatty acid methyl esters (soybean oil FAME) through the transesterification of soybean oil with alkaline catalyst was optimized in terms of contents of residual free fatty acids (FFA) in soybean oil FAME and yield of soybean oil FAME due to the inhibitory effect of FFA on sucrose polyesters synthesis. Soybean oil FAME and residual FFA were analyzed quantitatively by simultaneous gas chromatography on a fused silica capillary column after converting the FFA in soybean oil FAME to tert.-butyldimethylsilyl (TBDMS) derivatives. Transesterification of soybean oil was successfully performed with alkaline catalyst (NaOH, 95%), which resulted in 99.1% yield of soybean oil FAME and less than 0.1% residual FFA contents under the conditions such as $30^{\circ}C$, 20min. and 6:1 molar ratio of anhydrous methanol to soybean oil.

• Korean Journal of Food Science and Technology
• /
• 제22권6호
• /
• pp.681-685
• /
• 1990

Changes in the physicochemical characteristics and trans acid of cottonseed oil under the condition of selective hydrogenation, temperature$210^{\circ}C,\;H_2\;pressure\;0.3\;kg/cm^2$ Ni catalyst amount 0.12% (in oil), agitation speed 280 rpm, were investigated. The saturated fatty acid such as palmitic acid and stearic acid did not show any difference, while linoleic acid($50.03%{\rightarrow}9.38%$) were transformed to oleic acid ($20.65%{\rightarrow}60.35%$) during hydrogenation. In linoleic acid isomers, cc form were reduced significantly, but ct, tc, tt form showed little change, respectively. In oleic acid isomer, t form increased markedly, whereas there was no significant difference in c form. Meanwhile, melting point(MP) and solid fat content (SFC) were linearly increased, but iodine value(IV) linearly decreased as hydrogenation proceeded. From these results, linear regression equations were obtained as follows. MP & IV : Y= 1.59-2.36X(r=-0.96, p<0.05), SFC($at\;20^{\circ}C$) & MP : Y=2.81+2.01X(r=0.96, p<0.05), SFC($at\;20^{\circ}C$) & IV : Y=9.40-5.16X(r=-0.99, p<0.01), SFC($at\;20^{\circ}C$) & 18 : 1t : Y=6.25+8.48X(r=0.97, p<0.05)

• Journal of the Korean Chemical Society
• /
• 제37권1호
• /
• pp.119-130
• /
• 1993

The stereochemistry of 1,3-thiazolidine sulfoxides 1 in which 3 chiral centres are present in a molecule was elucidated by deuterium exchange and trapping reactions. 3-Acetoxy-1,3-thiazolidines 5 was oxidized to 6 and 8, corresponding $\alpha$-cis 10, $\alpha$-trans 11, $\beta$ -cis 12, and $\beta$ -trans 13 isomers were separated from their diasteromeric mixtures. Sulfoxide 10 was isomerized to more thermodynamically stable isomer 13 under neutral conditions in refluxing benzene or toluene. The methyl hydrogens of 2-methyl group in the sulfoxide 13 and those of the sulfoxide 11 were deuterated by the deuterium incorporation reactions. The intermediate sulfenic acids 25 and 26 derived from the sulfoxides 10 and 12 via sigmatropic rearrangement were trapped by 2-mercaptobenzothiazole (2-MBT) to give disufides 27 and 28 respectively. However, the sulfoxides 11 and 13 were transformed to ring expansion product dihydro-1,4-thiazine 29 under the same reaction conditions. In the presence of acid catalyst, the sulfoxides 10, 11, and 12 were converted to dihydro-1,4-thiazine 29 through the sulfoxide 13 quantitatively. The mechanisms of isomerization of sulfoxides and the formation of 29 were also discussed.

• Journal of the Korean Institute of Gas
• /
• 제27권3호
• /
• pp.19-26
• /
• 2023

Hydrogen, a clean energy source free of COx emissions, is poised to replace fossil fuels, with its usage on the rise. Despite its high energy content per unit mass, hydrogen faces limitations in storage and transportation due to its low storage density and challenges in long-term storage. In contrast, ammonia offers a high storage capacity per unit volume and is relatively easy to liquefy, making it an attractive option for storing and transporting large volumes of hydrogen. While NH₃ decomposition is an endothermic reaction, achieving excellent low-temperature catalytic activity is essential for process efficiency and cost-effectiveness. The study examined the effects of different zeolite types (5A, NaY, ZSM5) on NH₃ decomposition activity, considering differences in pore structure, cations, and Si/Al-ratio. Notably, the 5A zeolite facilitated the high dispersion of Ni across the surface, inside pores, and within the structure. Its low Si/Al ratio contributed to abundant acidity, enhancing ammonia adsorption. Additionally, the presence of Na and Ca cations in the support created medium basic sites that improved N₂ desorption rates. As a result, among the prepared catalysts, the 15 wt%Ni/5A catalyst exhibited the highest NH₃ conversion and a high H₂ formation rate of 23.5 mmol/g_cat·min (30,000 mL/g_cat·h, 600 ℃). This performance was attributed to the strong metal-support interaction and the enhancement of N₂ desorption rates through the presence of medium basic sites.

• Journal of the Korean Applied Science and Technology
• /
• 제36권1호
• /
• pp.324-332
• /
• 2019

Most countries including Korea and Indonesia have strong policy for implementing biofuels like biodiesel. Shortage of the oil feedstock is the main barrier for increasing the supply of biodiesel fuel. In this study, in order to improve the stability of feedstock supply and lower the biodiesel production cost, the feasibility of biodiesel production using two types of Indonesian tropical crop oils, pressed at different harvesting times, were investigated. R. Trisperma oils, a high productive non-edible feedstocks, were investigated to produce biodiesel by esterification and transesterification because of it's high impurity and free fatty acid contents. the kindly provided oils from Indonesia were required to perform the filtering and water removal process to increase the efficiency of the esterificaton and transesterification reactions. The esterification used heterogeneous acid catalyst, Amberlyst-15. Before the reaction, the acid value of two types oil were 41, 17 mg KOH/g respectively. After the pre-esterification reaction, the acid value of oils were 3.7, 1.8 mg KOH/g respectively, the conversions were about 90%. Free fatty acid content was reduced to below 2%. Afterwards, the transesterification was performed using KOH as the base catalyst for transesterification. The prepared biodiesel showed about 93% of FAME content, and the total glycerol content was 0.43%. It did not meet the quality specification(FAME 96.5% and Total glycerol 0.24%) since the tested oils were identified to have a uncommon fatty acid, generally not found in vegetable oils, ${\alpha}$-eleostearic acid with much contents of 10.7~33.4%. So, it is required to perform the further research on reaction optimization and product purification to meet the fuel quality standards. So if the biodiesel production technology using un-utilized non-edible feedstock oils is successfully developed, stable supply of the feedstock for biodiesel production may be possible in the future.

• Analytical Science and Technology
• /
• 제16권4호
• /
• pp.292-298
• /
• 2003

In this study, the photooxidation and ozonation of humic acid (HA) in aqueous solution were conducted and the treated HA samples at different reaction time were analyzed using ultrafiltration techniques to evaluate the change of their molecular size distributions with its DOC removal. Molecular size distribution of untreated HA showed 41.5% in higher molecular size fractions (>30,000 daltons) and 15.2% in much smaller molecular size fraction (<500 daltons). As UV irradiation time was increased, it was observed that the degradation of the large molecules of the fraction of >30,000 daltons into much smaller molecules was increased. In UV system, the HA molecules of the fraction of <500 daltons became significantly more and its percentage was increased from 35.3% (UV only irradiation) to 58.9% ($UV/TiO_2$) and 87.8% ($UV/H_2O_2$) in the presence of the photocatalysis. Otherwise, ozonation of HA produced mainly the fraction of medium molecular size ranging from 3,000 to 30,000 daltons with much lower portion (<~7%) in the fraction of <500 daltons. In ozone only system, the fraction of 30,000~10,000 daltons occupied in 41.5% at 60 min of ozonation time. In $O_3/H_2O_2$ system, the fraction of 30,000~10,000 daltons and 10,000~3,000 daltons occupied in 38.9% and 36.2% respectively. Based on these results, we suggested applicable treatment process which could be combined with $UV/H_2O_2$, $UV/TiO_2$ and $O_3$, $O_3/H_2O_2$ system for more effective removal of humic acid in water treatment.

• Journal of the Korean Chemical Society
• /
• 제40권5호
• /
• pp.357-364
• /
• 1996

Stereochemistries of acetoxy 1,3-oxathiolane 1 were determined by two methods. First, the structures of $\alpha$ isomer 7 and $\beta$ isomer 9 were confirmed by the difference of their conversion rates to dihydrooxathiin 2 under acid catalysis. When the acetoxy leaving group is located in trans relationship to sulfur, a isomer in which carboxanilide is less hindered sterically against the 1,3-oxathiolane ring is $\beta$ isomer 7, and the other isomer of which the reaction rate is slower than 7 is $\beta$ isomer 9. Second, in the deuterium reactions of diastereomeric sulfoxides, the isomers of which methine hydrogen is substituted to deuterium were cis isomers 15 and 17, and another isomers of which methyl hydrogen is substituted to deuterium were trans isomers 16 and 18. Substitution of either methine or methyl hydrogen to deuterium resulted from stereospecific ring opening followed by recyclization by [2,3] sigmatropic rearrangement.

• Applied Chemistry for Engineering
• /
• 제7권5호
• /
• pp.861-868
• /
• 1996

Skeletal isomerization reaction known as exothermic reaction shows possible maximum yield of i-butene from n-butene at $110^{\circ}C$ over $Pt/MoO_3/SiO_2$. Compared with conventional catalyst such as silica, zeolite, alumina etc., $Pt/MoO_3/SiO_2$ demonstrates higher yield while by-products except 2-butene do not form. Faster H spillover rate over $Pt/MoO_3/SiO_2$ is demonstrated via isothermal reduction experiment at $110^{\circ}C$ compared to the rate over $Pt/MoO_3/Al_2O_3$. Overall isomerization rates are proportional to higher spillover rates from Pt onto $MoO_3$ surface. The skeletal isomerization reaction is composed of two elementary steps. First, carbonium ion formation over Pt crystallites by H spillover. Second, carbenium ion formation over $MoO_3$ followed by formation of i-butene. Moreover, it is suggested that H spillover step from Pt surface onto $MoO_3$ is assumed to be the rate determining step and control the overall isomerization rate.

• Microbiology and Biotechnology Letters
• /
• 제48권4호
• /
• pp.506-514
• /
• 2020

4-Hydroxybenzyl alcohol (4-HB alcohol) is one of the major active components of Gastrodia elata Blume, with beneficial effects on neurological disorders such as headache, convulsive behavior, and dizziness. Here, we developed a metabolically engineered Corynebacterium glutamicum strain able to produce 4-HB alcohol from 4-hydroxybenzoate (4-HBA). First, the strain APS963 was obtained from the APS809 strain via the insertion of aroK from Methanocaldococcus jannaschii into the NCgl2922-deleted locus. As carboxylic acid reductase from Nocardia iowensis catalyzes the reduction of 4HBA to 4-hydroxybenzaldehyde (4-HB aldehyde), we then introduced a codon-optimized car gene into the genome of APS963, generating the GAS177 strain. Then, we deleted creG coding for a putative short-chain dehydrogenase and inserted ubiCpr encoding a product-resistant chorismate-pyruvate lyase into the pcaHG-deleted locus. The resulting engineered GAS355 strain accumulated 2.3 g/l 4-HB alcohol with 0.32 g/l 4-HBA and 0.3 g/l 4-HB aldehyde as byproducts from 8% glucose after 48 h of culture.