• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.767-773
• /
• 2016

A Weibull statistical analysis of the mechanical properties of SiC ceramics was carried out by immersion in acidic and alkaline solutions. The heat treatment was carried out at 1373 K. The corrosion of SiC was carried out in acidic and alkaline solutions under KSL1607. The bending strength of corroded crack-healed specimens decreased 47% and 70% compared to those of uncorroded specimens in acidic and alkaline solutions, respectively. The corrosion of SiC ceramics is faster in alkaline solution than in acid solution. The scale and shape parameters were evaluated for the as-received and corroded materials, respectively. The shape parameter of the as-received material corroded in acidic and alkaline solutions was significantly more apparent in the acidic solution. Further, the heat-treated material was large in acidic solution but small in alkaline solution. The shape parameters of the as-received and heat-treated materials were smaller in both acidic and alkaline solutions.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.77-84
• /
• 2017

White and black dross are resulted from the recycling of aluminum. There are no established processes to recover valuable materials from black dross. Hydrometallurgical processes seem to be suitable for the treatment of aluminum dross. The salts in the black dross are recovered by dissolving with water. The residues are treated by either alkaline or acid leaching. Although the leaching rate of alumina by NaOH is lower than that by acid, its intermediates are more suitable to the production of alumina-based materials. The future direction for the treatment and recovery of valuable materials from aluminum dross is discussed.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.811-819
• /
• 2003

The corrosion of steel reinforcing bar(re-bar) has been the major cause of the reinforced concrete deterioration. FRP(Fiber-reinforced polymer) reinforcing bar has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. However, FRP re-bar is pone to deteriorate due to other degradation mechanisms than those for steel. The high alkalinity of concrete, for instance, is a possible degradation source. Other potentially FRP re-bar aggressive environments are sea water, acid solution and fresh water/moisture. In this study long-term durability performance of FRP re-bar were evaluated. The mechanical and durability properties of two type of CFRP-, GFRP re-bar and one type of AFRP re-bar were investigated; the FRP re-bars were subjected to alkaline solution acid solution, salt solution and deionized water. The mechanical and durability properties were investigated by performing tensile, compressive and short beam tests. Experimental results confirmed the desirable resistance of FRP re-bar to aggressive chemical environment.

• Clean Technology
• /
• v.9 no.2
• /
• pp.57-61
• /
• 2003

A novel nitric acid-free desmut solution has been developed to remove smut, which is produced from a NaOH etching, on the surface of aluminum alloy metal in metal surface treatment processes. Comparing with the performance of 5% $HNO_3$ desmut solution, the mixed acid solution containing 2% $H_2O_2$, 0.5% HF, and 10% $H_2SO_4$ shows the same effect of smut removal for aluminum alloy samples of A16061 and A15052. To examine the surface alterations of the aluminum samples, in addition, the surface analysis is carried out with scanning electron microscopy (SEM) and electron probe microanalysis (EPMA).

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.73-79
• /
• 1997

Removal of the Arsenic components from the closed mine tailings has been attempted by the alkali-leaching method. Two tailings collected from the Daduck and Yuchon mine which were already closed many years ago were leached with caustic soda solutions. The Arsenic components in the leach liquor resulted from the alkali treatment of tailings could be removed fairly well in the form of insoluble calcium-Arsenic compound by the precipitation with calcium chloride. As a result, the extraction of about 60~90% Arsenic from the tailings could be obtained depending on the leaching conditions and the influence of temperature and the slurry density on the extraction of Arsenic was also found to be very small at the NaOH concentration more than 0.5N. In addition, it seemed that a caustic soda solution over 0.5N NaOH could be used repeatedly for the leaching of tailings since the consumption of NaOH was not so great in a leaching of them. As far as the precipitation of Arsenic components was concerned, more than 99% of Arsenic could be precipitated within 10 minutes by the addition of 2wt% CaC12 in to the leach liquor.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.373-378
• /
• 1996

알칼리 및 알칼리토금속(Cs,Rb,Ba,Sr), 전이감속원소(Zr,Fe,Mo,Ni,Pd,Rh), 란탄족 (La,Y,Nd,Ce,Eu.) 및 MA(Np,Am)등 17개 원소로 구성된 질산매질의 모의 방사성용액에서 옥살산에 의한 란탄족과 MA(Minor Actinide)의 공침전 연구를 수행하였다. 옥살산농도 0.5M에서 질산농도의 영향과 아스코빅산 첨가에 따른 원소들의 침전율이 조사되었다. 각 원소들의 침전율은 질산농도에 따라 약간 감소하였으나 란탄족과 MA는 99%이상 공침전되었다. 아스코빅산이 첨가되는 경우 Pd이 금속으로 환원침전되고 Mo.Fe,Ni.Ba의 경우는 침전율이 10∼20% 감소하는 것으로 나타났으나 기타원소들에 대해서는 영향이 나타나지 않았다. Pd의 환원침전은 질산농도 1.0M미만에서 일어났으며. 아스코빅산 농도가 0.01M∼0.02M 부근에서 최대로 나타났다. 하이드라진이 아스코빅산과 같이 첨가될 때 Pd의 환원침전을 억제하는 역할을 하였다.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.22-26
• /
• 1993

The flowsheet for the recovery of gallium and indium from zinc residues has been established based on the sulfuric acid treatment. In comparison with the alkali treatment, the method proposed in this work allowed the recovery of indium together with gallium. The majority of iron contained in leach liquor could be removed through the two-stage neutrallization under oxidative or reductive atmosphere. Crude gallium and indium could be obtained through the alkali and/or acid leaching of the products generated from the above treatment. In addition, cementation of indium with zinc powders could also be used for the concentration of it from weak acid solutions.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.103-108
• /
• 2007

The absorption spectra of Pu in stock solution were measured using a UV-Vis-NIR spectrophotometer after dissolving $PuO_2\;with\;HNO_3$, HF and $HClO_4$. The spectroscopic characteristics of Pu (III, IV, VI) in acidic, neutral and alkali media were investigated. Also, the intensities and position of major peaks for Pu(VI) were observed with increasing acidic and alkali concentration. The variation of oxidation states of Pu(VI) with an adding reducing reactant was investigated in HCl and NaOH medium.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.416-423
• /
• 1973

Formation of the complexes of alkaline earth metal ions with malonate and o-phthalate ions in aqueous, ethanol-water and acetone-water solutions (20% by volume) was studied at room temperature by the equilibrium ion exchange technique. This technique involved the measurements of distribution of radioactivity between cation exchange resin(Ion Exchange Resin CGC 241) and solution phases after the radioactive metal ions were equilibriated with the cation exchange resin in the presence of malonate or o-phthalate ions of varying concentrations. The pH of the solutions was controlled to 7.2~7.5, and the ionic strength of the solutions was kept at 0.10~0.11. The results of the present study indicated that the alkaline earth metal ions formed one-to-one complexes with the dibasic organic acids in all solvent systems examined. The present study showed that the relative stabilities of the complexes increased in the order: $Ba^{++}\;<\;Sr^{++}\;<\;Ca^{++}$ complexes. It was also observed that the relative tendency of the o-phthalate ion for the complex formation was somewhat greater than that of malonate ion in each solvent system. Furthermore, it was noted that the complexes were formed more readily in the mixed solvent than in the aqueous solution.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.259-264
• /
• 2015

For the enhanced oil recovery, one of the most important factors is to determine the surfactant formulation in chemical flood. The objective of this study is to analyze the microemulsion formed between the alkali-surfactant (AS) solution and A crude oil for screening surfactants. The alkali-surfactant solution was manufactured by using the surfactant purchased from AK ChemTech. $C_{16}-PO_7-SO_4$ and sodium carbonate solution were used as surfactant and alkaline, respectively. Both TEGBE and IBA were used as a co-solvent. The AS solution and A crude oil can form a Type III middle phase microemulsion at the salinity from 0.0 wt%~3.6 wt%. Increasing the salinity causes the phase transition of microemulsion from the lower (Type I) to middle (Type III) to upper (Type II) phase. Interfacial tension (IFT) values calculated by Huh's equation were in good agreement with ultralow IFT. According to this characteristic, the surfactant purchased from a domestic company can be applied to the enhanced oil recovery.