• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.301-301
• /
• 2012

Amorphous In-Ga-Zn-O (a-IGZO)는 광학적으로 투명하고 높은 전자이동도를 가지고 있어서 차세대 thin-film-transistor의 channel layer 물질로 각광받고 있다. 이러한 a-IGZO를 TFT channel layer로 사용하기 위해서는 소스 드레인 전극물질과 IGZO박막의 계면에서 ohmic contact을 만드는 것도 중요하다. 하지만 산화물 반도체의 특성상 금속물질을 증착시킬 때 산화금속계면을 형성하기 때문에 ohmic contact이 형성되기 어려운 것으로 알려져 있다. Au는 보통 전극물질로 많이 사용되는데, 이는 전기전도도가 매우 높고, 독특한 산화환원반응 특성을 보이지만, 화학반응을 잘 일으키지 않는 안정성을 가지는 성질에 기인한다. 본 연구진은 Au가 a-IGZO에 증착 시에 일어나는 표면의 화학적 상태변화를 이해하기 위해 방사광을 이용한 고분해능 광전자 분광법을 이용하여 표면변화를 분석하였다. Au는 (Au 4f) 증착 초기엔 약간의 gold oxide가 함께 형성되지만, 주로 metal gold의 형태로 존재하였다. In 3d, Ga 3d, O 1s, Zn 3d 각각의 스펙트럼에서는 Au 증착으로 인해 낮은 결합에너지에 새로운 state가 나타났다. 한편, In은 상대적으로 다른 원소들에 비해 Au와 좀 더 결합을 잘 하는 것으로 나타났는데 이는, In 5s 전자궤도가 전도메커니즘에서 중요한 역할을 하기 때문에, In-Au의 상대적인 강한 결합은 a-IGZO의 전기적 특성 변화에 기여할 수 있음을 의미한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.224-226
• /
• 2007

Hydrothermal 방법에 의해 준비된 $SnO_{2}$ 나노구조의 Pt의 구조적 특징을 알아보기 위해 X-ray diffraction (XRD), transmission electron microscopy (TEM) 을 통해서 확인할 수 있었다. 그리고 $Pt/SnO_{2}$ 나노구조 촉매의 cyclic voltammogram(CV) 통해서 전기화학적 특정을 알아보았다. XRD와 TEM 결과를 통해서 $SnO_{2}$의 나노결정성 입자의 크기는 121 nm임을 확인할 수 있었고 작은 입자가 서로 뭉쳐지면서 핵을 형성한 후 입자의 크기가 점차 증가한다는 것을 알 수 있었다. 그리고 Pt 촉매의 나노결정성 입자의 크기는 4 nm로 확인하였다. 또한 $SnO_{2}$에 Pt촉매의 결정성 입자의 구성이 잘 형성되었음을 확인하였고, 전기화학적 분석을 통해서는 에탄올 산화환원반응과 다결정 Pt의 존재를 확인하였다. 특히 에탄올에 대한 산화반응의 특성을 보이며, 이는 $SnO_{2}$의 에탄올산화반응용 지지체로써의 가능성을 의미한다.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.436-439
• /
• 2022

𝛽-Hydroxynitrile and 𝛽-ketonitrile were synthesized by the electrochemical oxidation of benzyl alcohol in an acetonitrile solvent. 𝛽-Hydroxynitrile was prepared by the reaction between benzaldehyde from the oxidation of benzyl alcohol and acetonitrile anion which was produced from the electrochemical reduction of acetonitrile. 𝛽-Hydroxynitrile was finally electrochemically converted into 𝛽-ketonitrile by applying 20 mA of current for 3 h. We demonstrated that 𝛽-hydroxynitrile or 𝛽-ketonitrile syntheses were prepared by electrochemical oxidation of benzyl alcohol with a commonly used Pt electrode at room temperature.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.431-439
• /
• 2014

The purposes of this research were to investigate the enrichment of metal-reducing bacteria from KURT groundwater and the identification of the microbial diversity by 16S rRNA as well as to examine microbial Fe(III)/Mn(IV) reduction and to analyze morphological features of interactions between microbes and precipitates and their mineralogical composition. To cultivate metal-reducing bacteria from groundwater sampled at the KURT in S. Korea, different electron donors such as glucose, acetate, lactate, formate, pyruvate and Fe(III)-citrate as an electron accepter were added into growth media. The enriched culture was identified by 16S rRNA gene sequence analysis for the diversity of microbial species. The effect of electron donors (i.e., glucose, acetate, lactate, formate, pyruvate) and electron acceptors (i.e., akaganeite, manganese oxide) on microbial iron/manganese reduction and biomineralization were examined using the 1st enriched culture, respectively. SEM, EDX, and XRD analyses were used to determine morphological features, chemical composition of microbes and mineralogical characteristics of the iron and manganese minerals. Based on 16S rRNA gene analysis, the four species, Fusibacter, Desulfuromonas, Actinobacteria, Pseudomonas sp., from KURT groundwater were identified as anaerobic metal reducers and these microbes precipitated metals outside of cells in common. XRD and EDX analyses showed that Fe(III)-containing mineral, akaganeite (${\beta}$-FeOOH), reduced into Fe(II)/Fe(III)-containing magnetite ($Fe_3O_4$) and Mn(IV)-containing manganese oxide (${\lambda}-MnO_2$) into Mn(II)-containing rhodochrosite ($MnCO_3$) by the microbes. These results implicate that microbial metabolism and respiratory activities under anaerobic condition result in reduction and biomineralization of iron and manganese minerals. Therefore, the microbes cultivated from groundwater in KURT might play a major role to reduce various metals from highly toxic, mobile to less toxic, immobile.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.102.1-102.1
• /
• 2010

고효율 멀티정션박막태양전지의 바텀셀 적용을 목적으로, 반응성CVD(Reactive thermal CVD)기술을 이용, $Si_2H_6+GeF_4$를 원료가스로, 이들이 가진 산화환원반응을 이용하여 400도 이하의 저온에서 Ge 및 Si 기판에 Ge을 에피성장 시켰다. Ge 기판위의 호모에피막의 경우, $2.5{\AA}/sec$의 성장속도와 99%의 Ge조성을 보였고, RHEED 및 HR-XRD를 통한 결정성 평가 결과, 고품질의 Ge 에피막의 성장이 확인되었다. 동일한 성장조건을 Si기판에 헤테로에피성장 시켰을 경우, 4% 격자불일치에 의해 막품질이 저하되는 것을 확인하였다. 이를 개선하기 위하여 저온에서 제작한 버퍼층에 대한 논의를 하고자 한다.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.269-275
• /
• 2021

In this study, ordered mesoporous silica-supported Ni catalysts were prepared for catalytic partial oxidation of methane (CPOM) by using electroless nickel plating method. Unlike conventionally impregnated catalysts, the electrolessly-plated nickel catalyst showed that nickel was highly dispersed and formed stably on silica-supported surface. It was verified by TEM-EDS analysis. During the activity tests, the electrolessly-plated nickel was barely sintered and the amount of carbon deposition was very small. Consequently, the catalyst was far less deactivated, while the sintering was significantly observed in the cases of the catalysts prepared by the conventional impregnation method. Regarding the palladium-promoted catalysts, the reducibility of nickel was increased, and the reaction performances were enhanced in terms of CH4 conversion and H2/CO ratio of produced syngas.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.239-246
• /
• 2015

The hybridization of carbon nano-materials enhances the efficiency of each function of the resulting structure or composites. Also, the addition of non-carbon elements to nanomaterials modifies the electrochemical properties. Electrodes combining porous carbon nanofibers (CNFs) and metal oxides benefit from the combination of the double-layer capacitance of the CNFs and the pseudocapacitive character associated with the surface redox-type reactions. Consequently, they demonstrate superior supercapacitor performance in terms of high capacitance, high energy/power efficiency and high rate capability. This paper presents a comprehensive review of the latest advances made in the development and application of various metal oxide/CNF composites (CNFCs) to supercapacitor electrodes.

• Clean Technology
• /
• v.26 no.4
• /
• pp.286-292
• /
• 2020

This study confirmed the effect of the Cu/CeO2-X catalyst on the CO oxidation activity at low temperature through the catalyst's structure and reaction characteristics. The catalyst was prepared by the wet impregnation method. Cu/CeO2_X catalysts were manufactured by loading Cu (active metal) using CeO2 (support) formed at different calcination temperatures (300-600 ℃). Manufactured Cu/CeO2_X catalysts were evaluated for the low-temperature activity of carbon monoxide. The Cu/CeO2_300 catalyst showed an activity of 90% at 125 ℃, but the activity gradually decreased as the calcination temperature of the CeO2-X and Cu/CeO2_600 catalysts showed an activity of 65% at 125 ℃. Raman, XRD, H2-TPR, and XPS analysis confirmed the physicochemical properties of the catalysts. Based on the XPS analysis, the lower the calcination temperature of the CeO2 was, the higher the unstable Ce3+ species (non-stoichiometric species) ratio became. The increased Ce3+ species formed a solid solution bond between Cu and CeO2-X, and it was confirmed by the change of the CeO2 peak in Raman analysis and the reduction peak of the solid solution structure in H2-TPR analysis. According to the result, the formation of the solid solution bond between Cu and Ce has been enhanced by the redox properties of the catalysts and by CO oxidation activity at low temperatures.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.33-39
• /
• 2010

The electrolytic reduction of a spent oxide fuel involves a liberation of the oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. Accordingly, it is essential to choose the optimum material for the processing equipment that handles the high molten salt. In this study, hot corrosion studies were performed on bare as well as coated superalloy specimens after exposure to lithium molten salt at $675^{\circ}C$ for 216 h under an oxidizing atmosphere. The IN713LC superalloy specimens were sprayed with an aluminized NiCrAlY bond coat and then with an $Y_2O_3$ top coat. The bare superalloy reveals an obvious weight loss due to spalling of the scale by the rapid scale growth and thermal stress. The chemical and thermal stability of the top coat has been found to be beneficial for increasing to the corrosion resistance of the structural materials for handling high temperature lithium molten salts.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.281-286
• /
• 1989

The redox properties of benzophydroxamic acid (Hben) and its oxovanadium complex, $VO(Ben)_2$ has been studied by the use of polarograpy and cyclic voltammetry. The radical anions of Hben seem to be generated in acetone. The wave at -0.05V vs. Ag/AgCl electrode might be attributed to the formation of radical anion and the wave at -1.78V vs. Ag/AgCl electrode might be attributed the formation of radical dianion. The $VO(Ben)_2$ exhibits one oxidation wave at + 0.55V and two reduction waves at -0.15V and -1.30V vs. Ag/AgCl electrode; the oxidation is reversible one electron process $(VO(ben)_2 {\rightleftharpoons} VO(ben)^+ + e)$. The reduction wave at -0.15V is quasireversible and is arised from the formation of radical anion,$VO(Ben)_2^-$. The second reduction wave at -1.30V is irreversible and this reduction process produces vanadium(III). This oxygen containing ligand of Hben seems to reduce the stability of + 4 oxidation state of vanadium while the sulfur or nitrogen donor of the ligands stabilize the + 4 oxidation state of vanadium when comparisons are made among several oxovanadium complexes.