• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.632-639
• /
• 1994

For dye sensitization of zinc oxide in the visible region, copper phthalocyanine(CuPc) and sunfast yellow(SY) were adsorbed in two layers on zinc oxide powder. The adsorption structures of $\alpha-and\beta-CuPc$ on zinc oxide were investigated by photoacoustic, IR and Raman spectra. The ${\alpha}-and\;{\beta}$-polymorphs exhibited dimeric structure or molecular aggregates. The surface photovoltaic effect of ZnO/CuPc/SY showed higher than that of ZnO/SY/CuPc and $ZnO/\beta-CuPc/SY$ indicated better photosensitive than $ZnO/\alpha-CuPc/SY.$ Electrophotographic sensitivity of $ZnO/\beta-CuPc/SY$ was $$S_{1/2}=2.99{\times}10^{-2}(erg/cm^2)^{-1}$ at 630 nm.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.73-78
• /
• 2009

Zinc Oxide (ZnO) nanorods arrays were deposited on ZnO buffered p-Si(100) substrates by hydrothermal method. The ZnO buffer layer with a thickness of 30 nm was deposited by metal oxide chemical vapor deposition at $500^{\circ}C$. The structural and optical properties of ZnO nanorods arrays controlled by precursor concentrations from 0.06 to 0.5 M were studied by FE-SEM(field emission scanning electron microscopy), XRD(X-ray diffraction), and PL(photoluminescence), respectively. It was found that the structural and optical properties of ZnO nanorods arrays are changed significantly with increase of precursor concentration. The sizes of diameter and length of nanorods were increased as the concentration increase, and good optical property was shown with the concentration of 0.3 M.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.293-299
• /
• 2010

Vertically aligned ZnO nanorods on Si (111) substrate were prepared by hydrothermal method. The ZnO nanorods on spin-coated seed layer were synthesized at $140^{\circ}C$ for 6 hours in autoclave and were thermally annealed in argon atmosphere for 20 minutes at temperature of 300, 500, $700^{\circ}C$. The effects of the thermal annealing on the structural and optical properties of the grown on ZnO nanorods were investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), photoluminescence (PL). All the ZnO nanorods show a strong ZnO (002) and weak (004) diffraction peak, indicating c-axis preferred orientation. The residual stress of the ZnO nanorods is changed from compressive to tensile by increasing annealing temperature. The hexagonal shaped ZnO nanorods are observed. The PL spectra of the ZnO nanorods show a sharp near-band-edge emission (NBE) at 3.2 eV, which is generated by the free-exciton recombination and a broad deep-level emission (DLE) at about 2.12~1.96 eV, which is caused by the defects in the ZnO nanorods. The intensity of the NBE peak is decreased and the DLE peak is red-shifted due to oxygen-related defects by thermal annealing.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.33-40
• /
• 2004

The eliminating of organic compound is essential process of the recovery of zinc sulfate from zinc sulfate waste water contained organic compound. The ozone oxidation and adsorption treatment is good for eliminating of organic compound in waste water. The zinc oxide treated an excess of sulfuric acid for zinc sulfate. We got zinc sulfate 740g from water 1kg.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1555-1562
• /
• 2015

Metal oxide semiconductors have been applied in several areas, such as solar cells, sensor, optical elements and displays, due to the high surface area, unique electrical and optical characteristics. Zinc oxide among the metal oxide has excellent physicochemical properties. Zinc oxide is a n-type semiconductor with a wide direct transition band gap of 3.37 eV at room temperature and large exciton binding energy of 60 meV. Cation-doped zinc oxide studies were conducted to complement the electrical and optical characteristics. In this paper, Al-doped ZnO was synthesized by hydrothermal synthesis using microwaves. ZnO was synthesized by adjusting the precursor ratio and using different dopants. The optimal ZnO synthesis conditions for crystal shape and optical properties were determined. The optical properties of aluminum doped zinc oxide were then examined by SEM, XRD, PL, UV-vis absorbance spectrum, and EDS.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.66-76
• /
• 2021

Electric arc furnace dust (EAFD) contains compounds, such as oxides and chlorides, including large quantities of Zn, Pb and Fe. An efficient and stable method for the extraction of metal elements from EAFD is the Rotary Kiln Process. This method is used to recover Zn in the form of crude ZnO (approximately 60%) via the addition of a reducing agent (coke, anthracite) and limestone (for basicity control) to EAFD. This process is commonly used in industry as well as in research and development. Currently, this method is used in many Korean commercial plants, producing approximately 150,000 tons of Crude ZnO per year. The majority of Zn is found in crude ZnO (approximately 76%). In addition components such as Pb, Cd, Sn, In, Fe, Cl, and F are present as oxides, chlorides, and alkaline compounds. This elements have an adverse effect on the zinc smelting process. Therefore, a refining process that eliminates these impurities is essential. In this study, we developed a process technology that efficiently separates Zn and Pb from byproducts (mainly chlorides). A bag filter was used to collect Zn and Pb generated during the dry purification process of crude ZnO. Pure components were recovered as metals or metal carbonate.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.26.2-26.2
• /
• 2011

최근 주목 받고 있는 산화아연(ZnO)은 레이저 다이오드, 가스 센서, 자외선 센서, 투명전극 등으로 다양하게 사용될 수 있어 연구개발이 폭 넓게 이루어지고 있는 상황이다. 특히, 3.3 eV의 direct bandgap 에너지를 가지고 있는 ZnO은 현재 자외선센서로 많이 적용되고 있는 물질인 GaN계열을 대체할 수 있는 유망한 물질로 주목 받고 있다. 공기중의 산소나 수분의 표면반응에 의한 자외선 측정을 하는 ZnO을 나노선으로 만들게 되면, 표면대비 부피비가 박막에 비해 급격히 증가하기 때문에 민감도가 커지고 반응시간이 짧아지게 된다. 본 연구에서는 자외선센서의 민감도와 반응성을 향상시키기 위해 전기화학적 합성법을 통해 ZnO의 박막과 나노선을 제조하였다. 사진공정을 통해 3 ${\mu}m$의 간격을 가진 금(Au) 전극을 만든 후, 전기화학적 합성법을 통해 아연이온이 포함된 용액에서 정전류를 흘려보내 아연 또는 ZnO을 증착시킬 수 있었다. 첫 번째로 ZnO을 양쪽 Au 전극에서 동시에 증착하여 두 박막이 접합하였고, 두 번째는 100nm의 지름을 가진 Ni 나노선를 전극 양쪽에서 자석을 통해 자기장을 형성해 정렬시키고 ZnO을 Au 전극과 Ni 나노선에 증착한 후, Ni 나노선를 산화시킴으로써, ZnO 나노구조를 형성하였다. 세 번째로는 Au 전극 양쪽에 아연을 전기화학적 합성을 하여 박막으로 증착하고 고온에서 산화과정을 통해 100 nm 이하의 지름을 가진 ZnO 나노선를 형성하였다. 이렇게 만들어진 세가지 구조의 ZnO의 나노구조와 결정성은 주사전자현미경과 X선 회절 분석기를 통해 측정하였으며, 자외선에 대한 민감도와 반응성은 365 nm의 파장을 가진 자외선발생기와 소스미터장치를 통해 측정하였다. 박막에서 100 nm 이하의 지름을 가진 ZnO 나노선로 갈 수록 자외선에 대한 민감도와 반응성이 향상되었다.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.220-226
• /
• 1994

본 연구에서는 폴리에스터(PET) 필름 위에 아연을 연속적으로 진공증착하는 실험을 수행한 후 얻어진 박막의 조직 및 조성을 SEM 및 AES로 조사하였다. 박막의 X-선 회절부석 결과, 2$ heta$=36。에서 아연의(0002)면이 주피크로 나타났으며 투과전자 현미경 관찰 결가 hcprn조로 증착시 basal plane인 (0001)면에 평행한 방향으로 우선 성장한다. 대기중 노출시 증착필름은 수분 및 산소와 반응하여 매우 다공성이며 부착성이불량한 산화피막을 형성하기 때문에 1차피막형성 후에도 산화가 지속적으로 진행되 었다. 박막내 존재하는 산소의 농도는 내부로 갈수록 지수함수적으로 감소하다가 증착금속과 기판간의 계면에서 다시 증가하는 경향을 보인다. 박막의 부식 특성을 조사현 결과 균일한 산화막 형성과 더불어 수분 존재하에 아연충에 미세한 pin hole 이 공극 부분부터 형성되어 개수가 증가하며 주위로 확장되는 형태를 나타내고 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.139-139
• /
• 2012

• JOURNAL OF ELECTRICAL WORLD
• /
• no.7 s.127
• /
• pp.78-83
• /
• 1987

최근의 피뢰기의 주류는 산화아연형이다. 그것은 우수한 전압-전류 비직선특성과 고신뢰성에 기인된다. 그러나 반면에 사용실적이 적다는 것, 산화아연소자의 열화기구가 충분히 해명되어 있지 않다는 등으로 정도가 높은 피뢰기의 외부진단기술에 대한 관심이 높아져가고 있다. 여기서는 최근의 동향과 적용사례를 소개한다.