• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.191-198
• /
• 2014

We synthesized thermoplastic polyurethane elastomer(TPU) with acid group and nano zinc oxide, and characterized their mechanical properties, thermal properties, contact angle and grip property. The effects of the zinc oxide content and size on the physical property of TPU were investigated. When the nano zinc oxide was introduced in TPU with acid group, it had excellent mechanical properties and grip by formation of hydrogen and ionic bonding. The wet slip of TPU with zinc oxide was increased continuously as ionization rate increased due to increase of hydrophilicity and ionic interaction, and mechanical properties were increased with increasing ionization rate up to 50%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.313-313
• /
• 2011

최근, 산화물 반도체를 통한 나노선 연구가 활발히 진행되고 있다. 1차원 나노선은 넓은 표면적을 가지며 다양한 특성을 지녀 미래 nanodevice로의 중요한 building block 소자로의 활용이 가능하다. 본 연구에서는 이종의 나노선을 합성하여 hierarchical nanojunction structure를 제작, 특성을 확인하였다. 이러한 구조는 나노선이 가지는 넓은 표면적의 특성과 동시에, multi-component fuctional nanodevice를 구현하는데에 적합한 구조이다. 본 연구는 텅스텐 기판 위에 고온의 열증착 방식을 이용하여 텅스텐 산화물 나노선을 제작시켜 그 위에 저온의 수열합성을 통한 산화아연 나노선을 제작한 후 향상된 field emission emitter로서의 특성을 살펴보았다. 합성된 텅스텐 산화물 나노선은 quasi-allign된 구조를 가지며, 이러한 구조 위에 ZnO를 스퍼터링하여 seed layer를 형성시키고, 암모니아수와 아연염을 이용한 수열합성법을 통하여 합성된 나노선 위에 nanobranch의 산화아연 나노선을 형성하였다. 이러한 성장특성은 SEM, TEM을 통하여 확인하였고 각각의 특성과 계면을 살펴보았다. 또한 이러한 구조를 이용하여 전계방출특성을 확인하였는데, 약 5.7 eV의 일함수를 갖는 텅스텐 산화물 나노선 위에 더 작은 값의 일함수를 갖는 산화아연 나노선을 합성하여 전계방출특성을 보았으며, 더 향상된 결과를 얻을 수 있었다. 또한 산화아연의 합성방법에 따른 전계방출 특성의 차이도 비교하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.29.2-29.2
• /
• 2010

최근 박막형 LED 및 박막형 태양전지등의 기존 마이크로 소자들의 효율향상을 위한 개선으로 나노구조를 이용한 나노소자 제작이 관심을 받고 있다. 이는 가능성으로만 여겨져왔던 나노기술이 기존 박막형 소자에서 포화된 효율상향 접근방식의 한계에 따른 것으로 생각되며, 나아가 나노기술로 제작된 나노소자가 우리 생활을 채우게 될 날이 얼마남지 않은 것을 의미한다. 특히, 디스플레이 소자에서의 나노기술은 더욱 더 중요시 되고 있다. 그로 인해 투명성과 우수한 광전기적 특성을 지닌 산화물 반도체와 그 나노구조 대한 관심이 날로 높아지고 있으며, 그 가운데 산화아연계(ZnO, MgZnO등) 나노구조를 이용한 나노소자 제작이 많이 연구되고 있다. 산화아연은 c축으로 우선 배향성을 가지는 우르짜이트 구조로써, 나노선 성장이 다른 산화물에 비해 용이하고 그 물리적, 화학적 특성이 안정 우수하다. 이러한 산화아연 나노선 제작법 가운데, 유기금속화학기상증착법은 다른 성장법에 비해 결정학적 광학적 특성이 우수하고 성장속도가 빨라 고품질 나노선 성장에 용이한 장비로 각광받고 있다. 하지만 bottom-up 공정을 기반으로 한 나노소자제작에서 몇 가지 문제점을 가지고 있다. 1) 수직형 대면적 성장, 2) 나노선 밀도 조절의 어려움, 3) 기판과의 계면층에 자발적으로 생성되는 계면층의 제거, 4) 고온성장시 precursor의 증발 문제 등이 그것이다. 이러한 문제점을 해결하기 위해 산화아연 나노구조 성장 시, 마그네슘(Mg)을 도입하여, 각 원소의 조성 차이에 따라 기판 표면에 30nm 두께 미만의 상분리층(단결정+비정질층)을 자발적으로 형성시켰다. 성장이 진행됨에 따라, 아연이 rich한 단결정 층에서는 나노선이 선택적으로 성장하게 하였고, 마그네슘이 rich한 비정질 층에서는 성장이 이루어지지 않게 하였다. 따라서 산화아연이 증발되는 온도영역에서 10nm 이하 직경을 가지는 나노선을 자발적으로 계면층 없이 수직 성장하였다. 또한, 표면의 단결정, 비정질의 사이즈를 Mg 유량으로 적절히 조절한 결과, 산화아연계 나노월 구조성장이 가능하였다.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.97-101
• /
• 2016

ZnO has nanostructured material because of unique properties suitable for various applications. Amongst all chemical and physics methods of synthesis of ZnO nanostructure, the hydrothermal method is attractive for its simplicity and environment friendly condition. Nanostructure ZnO thin films have been successfully synthesized on fluorine doped tin oxide (FTO) substrate using hydrothermal method. A possible growth mechanism of the various nanostructures ZnO is discussed in schematics. The prepared materials were characterized by standard analytical techniques, i.e., X-ray diffraction (XRD) and Field-emission scanning electron microscopy (SEM). The XRD study showed that the obtained ZnO nanostructure thin films are in crystalline nature with hexagonal wurtzite phase. The SEM image shows substrate surface covered with nanostructure ZnO nanrod. The UV-vis absorption spectrum of the synthesized nanostructure ZnO shows a strong excitonic absorption band at 365 nm which indicate formation nanostructure ZnO thin film. Photoluminescence spectra illustrated two emission peaks, with the first one at 424 nm due to the band edge emission of ZnO and the second broad peak centered around 500 nm possibly due to oxygen vacancies in nanostructure ZnO. The Raman measurements peaks observed at $325cm^{-1}$, $418cm^{-1}$, $518cm^{-1}$ and $584cm^{-1}$ indicated that nanostrusture ZnO thin film is high crystalline quality. We trust that nanostructure ZnO material can be effectively will be used as a highly active and stable phtocatalysis application.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.211-216
• /
• 2011

In this study, the effects of growth temperature on structural and optical properties of hydrothermally grown ZnO nanorod arrays have been investigated. Zinc nitrate ($Zn(NO_3)_2$) and hexamethylenetetramine were used as precursors. The ZnO buffered Si(100) with a thickness of 40 nm was used as the substrates. The ZnO nanorods were grown on these substrates with the temperature ranging from 55 to $115^{\circ}C$. The results were characterized by scanning electron microscope, X-ray diffraction and room temperature photoluminescence measurements. Well-aligned ZnO nanorods arrays were obtained from all samples. The tips of nanorods were flat when the temperature was less than $95^{\circ}C$, and the sharp-tip nanoneedle-like morphologies were obtained with the temperature of $115^{\circ}C$. In addition, some bundles were on the nanorods arrays with $115^{\circ}C$ due to the non-equilibrium growth. The growth temperature could affect the crystal and optical properties of ZnO. For the effects on crystal properties, the intensity of (002) peak was increased as the temperature was increased to $75^{\circ}C$, then decreased as the temperature was further increased to $115^{\circ}C$. As for the effects on optical properties, the intensity ratio of UV peak to visible peak is increased with the temperature increasing and the strongest UV peak intensity was obtained with the growth temperature of $95^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.1
• /
• pp.15-21
• /
• 2023

To prepare zinc oxide powder, three types of sodium-based alkali precipitants such as NaOH, Na₂CO₃, NaOH/NaHCO₃ were compared to the differences in the manufacturing process of zinc oxide powder from zinc precipitate products like intermediates with the consideration of thermodynamic reaction. The prepared zinc precipitate products by the reaction with the sodium-based alkali precipitant were confirmed to respectively hydroxy zinc chloride (Zn₅(OH)₈Cl₂·H₂O) and zinc carbonate hydroxide (Zn₅(OH)₆(CO₃)₂·H₂O) from XRD analysis. Zinc oxide particles were compared in heat treatment at 800℃ according to sodium-based alkali precipitants. The mixed NaOH and NaHCO₃ of alkali precipitant reaction was contributed to synthesize the more uniform zinc oxide particles.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.205-211
• /
• 2012

We investigated the optical and hydrophobic properties of the deposited silver (Ag) zinc oxide (ZnO) nanorods (NRs) on flexible indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates (i.e., ITO/PET). The ZnO NRs were grown by an electrochemical deposition using a sputtered ZnO seed layer and the Ag was deposited by using a thermal evaporator. For comparison, the same fabrication process was carried out on the bare ITO/PET without ZnO NRAs. Due to the discrete surface of ZnO NRs, the deposited Ag was formed as nano-scale particles, while the Ag became film-like for bare ITO/PET. In order to control the size and amount of Ag particles, the Ag deposition time was changed from 100 to 600 s. When the deposition time was increased, the Ag particles became larger and denser, and the absorptance was increased. This enhanced absorptance may be due to the localized surface plasmon resonance of Ag particles. Furthermore, the relatively high hydrophobicity was observed for the deposited Ag on the ZnO NRs/ITO/PET. These improved optical and surface properties are expected to be useful for flexible photovoltaic and optoelectronic devices.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.563-565
• /
• 2011

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.808-814
• /
• 2012

Photocatalytic zinc oxide powders were prepared from precursor zinc acetate and ammonia solution at elevated temperature, $80^{\circ}C$, by hydrothermal precipitation method. The effect of operating parameters, pH of ammonia solution and concentration of zinc acetate solution, on the characteristics of zinc oxide powders were experimentally examined. Zinc oxide powders prepared at the conditions of pH 11, zinc acetate concentration of 1.0 M, precipitation temperature of $80^{\circ}C$, showed smallest average particle diameter of $3{\mu}m$. SEM and XRD analysis confirmed that prepared zinc oxide has hexagonal rods structure, and Anatase type crystallinity. In addition, DRS and PL analysis showed that the zinc oxide has activity at the range of 200~400 nm of UV light. And the zinc oxide decomposed 57% of a food-color stamp Brilliant blue FCF for 3 hours under the UV radiation.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.291-297
• /
• 2013

ZnO nanowires were synthesized by vapor-liquid-solid (VLS) process using ZnO and graphite powders on the sapphire substrate coated with an Au film as a catalyst. ZnO nanowires had two prominent emission bands; i) near-band edge (NBE) emission band at 380 nm, and ii) a relatively stronger deep level (DL) emission band ($I_{NBE}/I_{DL}$ <1). In order for the ZnO nanowires to be utilized as an effective material for UV emitting devices, the photoluminescence intensity of NBE needs to be improved with the decreased intensity of DL. In the current study, hydrogen plasma treatment was performed to improve the photoluminescence characteristics of ZnO nanowires. With the hydrogen plasma treatment time of more than 120 sec, the extent of performance improvement was gradually decreased. However, the intensity ratio of NBE to DL ($I_{NBE}/I_{DL}$) was significantly improved to about 4 with a relatively short plasma treatment time of 90 sec, suggesting hydrogen plasma treatment is a promising approach to improve the photoluminescence properties of ZnO nanowires.