• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.109-110
• /
• 2015

알루미늄 합금의 종류중 하나인 ADC12는 가공성이 좋고 가격이 저렴하기 때문에 산업의 많은 분야에 이용할 수 있지만 양극산화를 진행할 시 합금의 주요 구성성분인 실리콘(Si)으로 인해 균열(Crack)이 생기는 문제가 발생하여 이에 따라 균일한 산화막이 생성되지 않다는 단점을 가지고 있다. 이 단점을 극복하기 위해 양극산화를 진행할 때 금속 음이온 성분이 첨가된 전해질을 이용하면 실리콘이 떨어져 나간 부분을 자가치료(Self-healing)할 수 있어 피막의 경도를 포함한 각종 특성이 증가하는 결과를 확인할 수 있다. 본 연구에서는 ADC12를 양극산화할 때 황산 수용액을 기본 전해질로 하여 전해질에 타이타늄(Ti), 마그네슘(Mg), 몰리브덴(Mo)이 포함되어 있는 금속 음이온 물질을 첨가하였고, 금속 음이온 전해질의 농도와 양극산화 진행 시간을 변수로 하여 제조한 산화막의 전기화학적 특성을 SEM(Scanning Electron Microscope), Tafel plot, 그리고 Microvickers hardness tester를 통해 평가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.202-202
• /
• 2010

불순물이 첨가되는 이원계 및 다원계 투명전도성 산화막들은 불순물의 첨가량에 따라서 전기적 그리고 광학적 특성의 변화를 나타낸다. 조성비에 따른 특성 변화를 조사하기 위하여 산화아연 타겟과 산화갈륨 타겟을 이용하여 혼합 스퍼터링 방식을 이용하여 인듐, 갈륨 등이 소량 첨가된 산화아연막(IGZO)을 증착하였다. Triple Co-sputter의 인가 전력을 변화시켜 가면서 박막 구성 원소들의 성분비 변화에 따른 전기적 그리고 광학적 특성을 조사하였다. 증착된 박막들은 조성비에 따라 전기적 그리고 광학적 특성이 변화되는 것을 확인하였다. 실온에서 유리기판 위에 증착된 박막은 저항률이 $2^*10^{-3}\;{\Omega}-cm$의 전기적 특성을 보였고, 투과도가 400~800nm 파장 범위 내에서 80% 이상의 광학적 특성을 보였다.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.830-836
• /
• 1997

The surface modification of iron oxide particle produced from steel-pickled acid by sodium-contained materials was studied. The molar ratio of $SiO_2$ to $Na_2O$ of sodium silicate was 1, 2, 3.5, respectively. The dispersion stability of iron oxide suspension as functions of amount of silica and pH was evaluated by surface charge and sedimentation velocity of iron oxide particle. Then the amount of sodium silicate was determined to provide a dispersion stability of iron oxide particle above pH 7. Finally, the surface modification of iron oxide particle with sodium silicate as silica-contained materials was done by wet ball milling. In the results of study, the dispersion stability of silica modified iron oxide particle was largely depended on amount of silica and pH together. The untreated iron oxide was unstable at pH 8, i.e. isoelectric point, but, the surface modified iron oxide particle with 0.8wt% silica was stable above pH 5. The dispersion stability was enhanced with 0.2wt% of anionic polyelectrolyte.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.355-355
• /
• 2004

사용후핵연료 금속전환체는 세라믹형 사용후핵연료를 리튬용융염으로 금속전환하여 생성한 우라늄금속으로 상온에서도 표면산화가 진행될 정도로 매우 불안정한 상태이다. 이에 대한 저장 안정성 향상방안을 도출하기 위해 금속전환체의 주성분인 금속우라늄과 산화 안정화물질인 Nb을 첨가한 모의 금속전환체 합금을 제작하여 $200^{\circ}C~300^{\circ}C$ 온도구간에서 열중량분석기(TGA)를 이용해 순수 산소분위기로 산화시험을 수행하였다.(중략)

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.207-211
• /
• 2004

This study has been investigated the effect of different concentrations (0%, 0.05%, 0.1%, 0.5% and 1.0%) of M.W. 120 kDa of chitosan on improvement of shelf-life and quality in the spicy beef meat. The spicy beef meat without chitosan has not shown the extended effect of storage. However, concentration of more than 0.1% of chitosan have a very strong effect on shelf-life improvement of spicy beef meat. In antioxidation, spicy beef meat with 1.0% of chitosan has shown remarkable effect. The pH value and water holding capacity of these spicy beef meat revealed no significant differences among various concentration of chitosan treatments during storage periods. The value of red color was stable in samples treated with chitosan during period of storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1813-1818
• /
• 2015

Grape seed extract (GSE) was added to grape seed oil to improve the oxidative stability of the grape seed oil during storage. To measure the oxidative stability of grape seed oil, peroxide value, acid value, and conjugated diene value were measured, and changes in browning, vitamin E, fatty acid composition, and polyphenol content of oil were examined. In the case of grape seed oil with GSE, peroxide value, acid value, and conjugated diene value were lower than those of grape seed oil. The magnitude of increase in absorbance of grape seed oil with GSE was less than that of additive-free grape seed oil, whereas the magnitude of decrease in vitamin E isomers in grape seed oil with GSE was less than that of grape seed oil with no additive. Changes in fatty acid composition were also similar. However, polyphenol contents showed the greatest reduction in grape seed oil containing GSE. GSE contributes to the oxidation stability of grape seed oil, but the antioxidant capacity of GSE was lower than that of butylated hydroxytoluene.

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.394-399
• /
• 2006

The polishing performance and the relationships of electrochemistry depending upon oxidizers and additives in the tungsten CMP slurry used in semiconductor industry were investigated. Hydrogen peroxide, ferric nitrate and potassium iodate were used as oxidizers and they showed different oxidation reactions on tungsten film depending on the kind of oxidizers and pH of slurry. The differences influenced the polishing performance. Etching reaction was predominated in the hydrogen peroxide. However, passivation reaction was prevailed in ferric nitrate and potassium iodate. TMAH and KOH raised the potential energy and removal rate of tungsten, and improved a dispersion characteristic of slurry by increasing absolute value of zeta potential. Addition of 100 ppm of poly(acrylic acid) of M.W. 250,000 improved dispersion ability.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.263-270
• /
• 2018

Recently, porous ceramic materials with anti-static performance are urgently needed for semiconductor and OLED/LCD display manufacturing industry. In this work, we fabricated porous titanium manganese oxide ceramics having the surface resistivity of $10^8-10^{10}$ ohm and enhanced mechanical strength by partial sintering method using nanosized titanium oxide. By addition of nano-sized titanium oxide in the matrix, neck formation between grains was strengthened, which remarkably increased flexural strength up to 170 MPa (@porosity: 15 %), 110 MPa (@porosity: 31 %), compared to 80 MPa (@porosity: 26 %) for pristine titanium manganese oxide ceramics. We evaluated the performances of our ceramics as air-floating module for OLED flexible display manufacturing devices.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.91.2-91.2
• /
• 2011

고체산화물 연료전지의 연결재의 필요한 물성으로는 공기극과 연료극을 차폐시켜줄 수 있는 고밀도와 구성 소재간의 전기적으로 연결될 수 있는 전기전도도 및 낮은 이온전도도. 산화극과 환원극에서 화학적 안정성과 타 구성 소재와의 열팽창 계수가 일치 등이 중요한 특성으로 필요하게 된다. 이를 위해 LaCrO3계 연결재가 주로 사용되어 왔다. 그러나 LCO계 연결제는 $1400^{\circ}C$ 이상의 높은 소결 온도와 이로 인한 Cr의 휘발로 인한 타 구성소재와의 반응 등으로 인해 저온소결의 필요성이 재기되고 있는 소재 이다. 본 연구에서는 LCO계 구성 소제에 소결 조제를 첨가하여 저온에서 결정성 및 소결거동, 전기적 특성을 평가하였다.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.146-151
• /
• 2008

In this study, batch or semi-continuous reactions, introducing site-specific carboxylic acids in ${\beta}$-1,3-glucan structures, were performed to increase water solubility and gel forming ability, using TEMPO/hypobromite with or without NaBr as catalysts. Regio-selective carboxylic acid formations were determined with infrared (IR) and $^{13}C$ nuclear magnetic resonance (NMR) spectroscopic analyses. The regio-selective reactions with and without NaBr gave oxidation yields of 92.5 and 85.6%, respectively, in the batch type, and yields of 93.9 and 86.4%, respectively, in the semi-continuous type. The reaction times in the batch and semi-continuous reactions without NaBr were delayed by 100 and 150%, respectively, as compared to those with NaBr. A combination of IR and $^{13}C$ NMR analyses were used to confirm the formation of carboxylic acids in ${\beta}$-1,3-glucan. From the batch reactions with and without NaBr, the water solubilities of oxidized products were 50.0 and 55.6%, respectively, and in the semi-continuous reactions they were 52.6 and 53.5%, respectively; while the water solubility of the native ${\beta}$-1,3-glucan was less than 1.0%. Finally, as compared to the native ${\beta}$-1,3-glucan, the gel forming ability of the reaction products was greatly increased irrespective of the presence of NaBr or the reaction type.