• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.41-46
• /
• 2014

The property improvement of polycarbonate coated with a multilayer film composed of an inorganic $SiO_2$ film and a photocatalytic $TiO_2$ film was studied. The $SiO_2$ film as a binder had an excellent light transmission characteristic. After the treatment with atmospheric pressure plasma, the surface of $SiO_2$ film showed the hydrophilicity, which increased the film coating uniformity with a $TiO_2$-containing aqueous solution. When $TiO_2$ film was over 200 nm thick, the absorption effect of UV rays in the range of 180~400 nm suppressed the yellowing phenomena of polycarbonate substrate. The inorganic film improved the heat resistance of polycarbonate substrates. $TiO_2$ film in the outmost under the exposure of UV rays promotes the catalytic oxidation characteristics and yields the capability to the decomposition of organic contaminants, and also increases the self-cleaning properties due to the increase of hydrophilicity. Structural stability of the polycarbonate substrate coated with inorganic $TiO_2$ and $SiO_2$ film was shown. The role of $SiO_2$ film between $TiO_2$ and polycarbonate substrate suppressed the peeling of $TiO_2$ film by inhibiting the photocatalytic oxidation effect of $TiO_2$ film on the polycarbonate substrate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.931-935
• /
• 2012

In this study, we fabricate and investigate low-temperature solid oxide fuel cells with a ceramic substrate/porous metal/ceramic/porous metal structure. To realize low-temperature operation in solid oxide fuel cells, the membrane should be fabricated to have a thickness of the order of a few hundreds nanometers to minimize IR loss. Yttrium-doped barium zirconate (BYZ), a proton conductor, was used as the electrolyte. We deposited a 350-nm-thick Pt (anode) layer on a porous substrate by sputter deposition. We also deposited a 1-${\mu}m$-thick BYZ layer on the Pt anode using pulsed laser deposition (PLD). Finally, we deposited a 200-nm-thick Pt (cathode) layer on the BYZ electrolyte by sputter deposition. The open circuit voltage (OCV) is 0.806 V, and the maximum power density is 11.9 mW/$cm^2$ at $350^{\circ}C$. Even though a fully dense electrolyte is deposited via PLD, a cross-sectional transmission electron microscopy (TEM) image reveals many voids and defects.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.262-266
• /
• 2007

Polycrystalline $Mn_xFe_{3-x}O_4$ thin films were synthesized on Si(100) substrates using sol-gel method and the effects of Mn substitution on the structural, magnetic, and magnetotransport properties were analyzed. X-ray diffraction revealed that cubic structure is maintained up to x = 1.78 with increasing lattice constant for increasing x. Such increase of the lattice constant is attributable to the substitution of $Mn^{2+}$ (with larger ionic radius) ions into tetrahedral $Fe^{3+}$(with smaller ionic radius) sites. VSM measurements revealed that $M_s$ does not vary significantly with x, qualitatively explainable by comparing spin magnetic moments of Mn and Fe ions. On the other hand, $H_c$ was found to decrease with increasing x, attributable to the decrease of magnetic anisotropy due to the decrease of $Fe^{2+}$ density through $Mn^{2+}$ substitution. Magnetoresistance (MR) of the $Mn_xFe_{3-x}O_4$ films was found to decrease with increasing x. Analysis of the MR data in comparison with the VSM results gives an indication of the tunneling of spin-polarized carriers through the grain boundaries of the polycrystalline samples at low external field and spin-flip of the carriers at high external field.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.359-365
• /
• 2023

In order to satisfy the requirements of dynamic X-ray imaging with high frame rate and low image lag, minimizing parasitic capacitance in photodiode and overlapped electrodes in pixels is critically required. This study presents duoPIX^TM dynamic X-ray imaging sensor composing of readout thin film transistor, reset thin film transistor and photodiode in a pixel. Furthermore, dynamic X-ray detector using duoPIX^TM imaging sensor was manufactured and evaluated its X-ray imaging performances such as frame rate, sensitivity, noise, MTF and image lag. duoPIX^TM dynamic X-ray detector has 150 × 150 mm² imaging area, 73 um pixel pitch, 2048 × 2048 matrix resolution(4.2M pixels) and maximum 50 frames per second. By means of comparison with conventional dynamic X-ray detector, duoPIX^TM dynamic X-ray detector showed overall better performances than conventional dynamic X-ray detector as shown in the previous study.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.333-333
• /
• 2004

고온의 용융염 매질에서 전해 정련 또는 전해제련에 의해 원하는 물질을 회수하기 위한 공정에 있어서 정확한 산화/환원 전위 측정 및 안정된 전위를 인가하기 위해서는 재현성과 내구성이 확보된 기준 전극이 필요하다. 용융염 매질에서 많이 사용되는 기준 전극은 Ag/AgCl 전극으로서 온도 사이클에 대한 전위의 히스테리시스가 작고 고온에서도 전위가 안정하다. Ag/AgCl 기준전극으로 pyrex 봉 하단부를 수 마이크론 두께의 pyrex 박막으로 제작된 것은 고온 용융염에 접촉시 열 충격, 전극류와 충돌에 의한 물리적 취약성 및 고온의 용융염에 의한 부식과 같은 단점이 있다.(중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.124-124
• /
• 2003

To improve the electrochemical properties of thin-film LiCoO$_2$ cathodes, metal oxides were coated on the LiCoO$_2$ thin films using f sputtering. Galvanostatic charge-discharge experiments showed the enhanced cycling behaviors in the metal-oxide coated LiCoO$_2$ thin films than the uncoated ones. These results are because the metal-oxide coating layer suppresses the degradation of Li-diffusion kinetics during cycling, which is related to the protection of cathode surface from the electrolytes [l-3]. The variation in the metal-oxide coating thickness ranging from 10 to 300 nm did not affect the electrochemical properties. Changes of lattice constants in the coated and bare LiCoO$_2$ thin films at different charged states will also be discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.4
• /
• pp.275-277
• /
• 2013

Thin-film transistors(TFTs) with silicon zinc tin oxide(SZTO) channel layer are fabricated by solution-process. The threshold voltage ($V_{th}$) shifted toward positive directly with increasing Si contents in SZTO system. Because the Si has a lower standard electrode potential (SEP) than Sn, Zn, thus degenerate the oxygen vacancy (VO). As a result, the Si act as carrier suppressor and oxygen binder in the SZTO as well as a $V_{th}$ controller.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1618-1620
• /
• 1996

A variety of processing techniques have been reported for preparing high quality functional thin films, and one of the most successful techniques has been known to be the rf FTMS(facing targets magnetron sputtering) method. The rf FTMS has preferable advantages to reduce the resputtering effect when depositing thin films and efficiently to oxidize the grown films by oxygen radicals. The resulting optimum conditions were found to be the rf power 50 W and the substrate position of 20 mm.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.127-135
• /
• 1999

Nickel oxide films were prepard by using the electron beam evaporation technique. Coloring and bleaching experiments for cyclic durability were repeated in KOH electrolyte by cyclic voltammetry. Visible spectrophtometry was used to assess the stability of the transmittance in the degraded films. X-ray photoelectron spectroscopy results showed that the grain surface are oxygen-rich compared to the grain interiors in a NiO film. Open circuit memory of colored films is about 400hours in lN KOH. The rate of self discharge was evaluated by measuring the transmittance at 550nm of a fully oxidized NiO film. The rate of self discharge was increased polynomially with time and the film is nearly bleached after about 400hours. It was also found that the degraded film by repeated cycles in the KOH solution changed the grain shape of film surface The film prepared under a vacuum pressure of $3\times10^{-4}$ mbar was found to be rather stable when subjected to the repeated coloring and bleaching cycles in KOH electrolyte. Band theory applied to explain the electrochromic mechanism was discussed.

• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.751-757
• /
• 2006

Recently, a new type of solid oxide fuel cells has been developed employing extremely thin oxide electrolyte. These fuel cells are expected to operate at significantly reduced temperature compared to conventional solid oxide fuel cells. Accordingly, they may resolve the stability and material selection issues of high temperature fuel cells. Furthermore, they may eliminate the limitations of polymer membrane fuel cells whose operation temperature is under $100^{\circ}C$. In this paper, we review the electrolytes for intermediate temperature operation. Then, we discuss the current development of thin film solid oxide fuel cells that possibly operated at low temperatures.