• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.250-256
• /
• 2006

This experiment was conducted to investigate the hydroponic culture possibility and the optimal solution strength of 'Pechika' ever-bearing strawberry in summer highland. Maximum room temperature and minimum root zone temperature of plastic house were $30.8^{\circ}C\;and\;19^{\circ}C$ in highland respectively and $4^{\circ}C\;and\;3^{\circ}C$ lower than in level and. The growth of 'Pechika' was better in highland. There was effective in producing the good yield and fruit quality in highland and the deformed fruits also were decreased. The soluble solid and titratable acidity content increased in highland. Early growth was the most effective in standard solution $(EC\;0.75dS\;m^{-1})$ and had a tendency to be inhibition with increasing nutrient concentration. Standard solution was also the highest to yield about 2,064kg/10a among treatments, and 2/3S, 4/3S, 5/3S by turns. The browning roots and root activity increased when the solution strength was increased, especially in EC $1.25dS{\cdot}m^{-1}$. The soluble solids and acidity content of fruits were increased with higher solution strength. Therefor, the summer hydroponic culture of 'Pechika' ever-bearing strawberry was suitable in highland and effective in standard solution $(EC\;0.75dS{\cdot}m^{-1})$ in solution control.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.423-435
• /
• 1986

As the first part of the studies on utilization of polyunsaturated lipids in red muscled fishes like sardine (Sardinops melanosticta) and mackerel (Scomber japonicus), lipid distribution in body sections, whole body, meat, viscera, skin, and head, lipids, polar and nonpolar, and fatty acid composition of the oils obtained from these body sections, and seasonal variations in fatty acid composition, particularly in the content of polyenoic acids, EPA and DHA, were determined, The content of total lipids was ranged $22.2\%\;to\;27.2\%$ in case of sardine without broad difference between body sections, while in case of mackerel $36.7\%\;to\;38.8\%$ unevenly in skin and head. The lipids of both fish were composed of more than $80\%$ of non-polar lipid and there was not much differences in the fatty acid composition between the lipids, polar and non-polar. The major fatty acids of the lipids were $C_{14:0},\;C_{16:0},\;C_{18:0},\;C_{16:1},\;C_{18:1},\;C_{20:1},\;C_{20:4},\;C_{20:5},\;and\;C_{22:6}$, and these acids, $C_{18:1},\;C_{16:0},\;C_{22:6},\;C_{18:0},\;C_{20:5},\;C_{14:0},\;C_{16:1}$, were in high quantity in order. Seasonal variation in fatty acid composition of sardine oil did not show any great variety between sections. There was a tendency in general that saturated and monoenoic acids began to decrease in winter and showed the minimum in April; hereafter get to increase again, while polyenoic acids showed the maximum in April. Both $C_{20:5}\;and\;C_{22:6}$ acids were high in the season of April to July. Variation in fatty acid content was in a width of $8\%$ for saturated, $5\%$ for monoenoic, and $12\%$ for polyenoic acid. $C_{20:5}\;and\;C_{22:6}$ acid were varied in $9.4\%\;and\;9.8\%$, respectively. In case of mackerel oil, seasonal variation tended same as in sardine oil except the fact that the saturated and monoenoic acid decreased to the minimum in the term of April to July in which the polyenoic acid content was also higher marking $27.3\%\;to\;36.1\%$ in average. Fatty acid variation was in a range of $6.3\%$ for saturated, $8.3\%$ for monoenoic, and $13.8\%$ for polyenoic acid but variation of $C_{20:5}\;and\;C_{22:6}$ acid was 4, $3\%$ and 3, $4\%$ respectively. When fresh sardine was stored for 10 days at $5^{\circ}C$, oxidation was rapidly initialed and consequently resulted in fast loss of $C_{20:5}\;and\;C_{22:6}$ acids. It is concluded from the results that the catch of sardine and mackerel in the season of April to June would be adequate for the preparation of polyunsaturated lipid condenced oil in regard to sectional lipid distribution and its variation in seasons.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.37-45
• /
• 2006

Recently, wood-framed houses has been built in the Korea for pension. Wood is good material for human healthy, while the construction lumbers are treated with preservative such as CCA (chromated copper arsenate), which contain some toxic elements for human body. However, if the waste woody biomass treated with various heavy metals, which has been collected from house construction or demolition, was fired in the field, and incinerated or landfilled after mass collection, such components will result in the toxic air pollutants in the burning or land fills, and spreaded into other areas. So the careful selection of wood and chemicals are required in advance for house construction, in particular, for environment-friendly housings. Therefore, this study was carried out to determine the content of toxic heavy metals in woody materials such as domestic hinoki and imported hemlock treated with CCA for housing materials, and the post-treated wood components such as organic fertilizer, sludge, dry-distilled charcoal and carbonized charcoal, to be returned finally into soil. The results are as follows. 1) The chemical analysis of toxic trace elements in various solid biomass required accurate control and management of laboratory environment, and reagents and water used, because of the error of data due to various foreign substances added in various processing and transporting steps. So a systematic analyzers was necessary to monitor the toxic pollutants of construction materials. 2) In particular, the biomass treated with industrial biological or thermal conditions such as sludge or charcoals was not fully dissolvable after third addition of $HNO_3$ and HF. 3) The natural woody materials such as organic fertilizer, sludge. and charcoals without any treatment of preservatives or heavy metal components were nontoxic in landfill because of the standard of organic fertilizers, even after thermal or biological treatments. 4) The CC A-treated wood for making the construction wood durable should not be landfilled, because of its higher contents of toxic metals than the criterion of organic fertilizer for agriculture or of natural environment. So the demolished waste should be treated separately from municipal wastes.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.453-458
• /
• 2016

'Jonathan' apples are relatively small size which contributes to enhancing fruit consumption and gaining popularity. Thus, this study was carried out to evaluate the effects of AVG (aminoethoxyvinylglycine, ReTain$^{(R)}$), sprayable 1-MCP (1-methylcyclopropene, Harvista$^{TM}$), and fumigation 1-MCP (SmartFresh$^{TM}$) applications on fruit quality attributes and storability in 'Jonathan' apple fruits during cold-stored. The Jonathan fruits were dipped with either ReTain (75 mg/L) or Harvista (125 mg/L) solutions for 5 min, or fumigated with SmartFresh (1 mg/L) for 18 hr before storage at $0{\pm}1^{\circ}C$ for 75 days. Flesh firmness and titratable acidity remained higher in all pre-treated apples than control ones during cold storage period. Flesh firmness was higher for apples treated with ReTain and SmartFresh than samples treated with Harvista, while soluble solid content and respiration rate were not affected by sample pretreatment. Internal ethylene concentration (IEC) of all pretreated apples remained below about $4.5{\mu}L/L$ during the entire storage period while that of control sample greatly increased to $10.29{\mu}L/L$. Ethylene production was much higher in control fruits than in treated ones during cold storage. These results indicated that ReTain and 1-MCP treatments would be considerably effective in retention of fruit quality attributes of 'Jonathan' apple during cold-stored.

• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.174-184
• /
• 2008

The quality and storage characteristics of low salted onion and five cereals-doenjang (DFO) were investigated. At the DFO, soybean koji ($57{\sim}62%$), onion (3%) and salt (8%) were mixed with equal amount of rice, barley, glutinous millet and glutinous indian millet ($10{\sim}30%$), and water ($7{\sim}12%$). The storage of DFO was done by vacuum packing in polypropylene tube, and sterilized at $121^{\circ}C$. The fermentation and storage was conducted for 60 days at $25^{\circ}C$ at each condition. Control doenjang (GD) was the salinity of 16% soybean doenjang that was not sterilized and packed in plastic containers for storage. During the fermentation, pH of DFO was lower than GD. The pH maintained stability during the storage, and revealed to be lowered, as the proportion of mixed cereals was higher. During the fermentation of DFO, the brix degree revealed to be higher than GD and maintained s1ability during the storage. During the fermentation and storage, the amino nitrogen content of DFO was ranged $400{\sim}470mg%$ by showing higher content than GD and maintained stable content during the storage. During the fermentation, the activities of protease and ${\beta}$-amylase were maintained to be high at DFO, but the activities during the storage were high at GD. The color $L^*$ value of DFO during fermentation and storage maintained higher values than GD, but $a^*$ value revealed lower pattern. Total free amino acids of DFO was ranged $1,918{\sim}2,290mg%$ which was higher than GD that recorded 1,291 mg%. When the sensory evaluation was conducted for DFO that was fermented and stored for 60 days, the DFO mixed with $20{\sim}30%$ of cereals resulted to have more savory taste, flavor, and sweeter than GD, and overall acceptability for color and overall taste was high.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.389-393
• /
• 2001

For an effective utilization, quality stability of instant powdered oyster soup made of canned oyster processing waste water (IPSW) was determined. Instant powdered soup from oyster hot-water extracts (IPSE) was also prepared by mixing hot-water extract powder (15 g) with table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g) and onion powder (1.5 g). In preparing IPSW, mixed powder from wash water and boiling liquid waste, instead of powder from hot-water extracts and table salt, was added (powder from boiling liquid waste: powder from wash water= 12: 8) and other additives were added in proportion to those in the IPSE. The moisture content, water activity, peroxide value and fatty acid composition showed little changes during storage of the IPSW. The pH, volatile basic nitrogen content and brown pigment formation increased slightly, while white index decreased slightly during storage of IPSW. No significant difference was observed in the changes of food component during storage between IPSW and IPSE. According to a sensory evaluation, the change in quality of IPSW was negligible during 12 months of storage. from the results of the chemical experiment and sensory evaluation, IPSW packed with laminated film bag (OPP, $20{\mu}m/PE,\;20{\mu}m/paper,\;45g/m^3/PE,\;20{\mu}\;m/Al,\;7{\mu}\;m/PE,\;20{\mu}m$) was revealed to be preserved in good quality during 12 months of storage.

• Korean Journal of Microbiology
• /
• v.41 no.2
• /
• pp.99-104
• /
• 2005

Corynebacterial clones which exert regulatory effects on the expression of the glyoxylate bypass genes were isolated using a reporter plasmid carrying the enteric lacZ fused to the aceB promoter of Corynebacterium glutamicum. Some clones carried common fragments as turned out by DNA mapping technique. Subcloning analysis followed by the measurement of $\beta-galactosidase$ activity in Escherichia coli identified the region responsible for the aceB-repressing activity. Sequence analysis of the DNA fragment identified two independent ORFs of ORF1 and ORF2. Among them, ORF2 was turned out to be responsible for the aceB-repressing activity. ORF1 encoded a 23,216 Da protein composed of 206 amino acids. Sequence similarity search indicated that the ORF may encode a ECF-type $\sigma$ factor and designated sigH. To identify the function of sigH, C. glutamicum sigH mutant was constructed by gene disruption technique and the sigH mutant showed growth retardation as compared to the wild type strain. In addition, the mutant strain showed sensitivity to oxidative-stress generating agent plumbagin. This result imply that sigH is probably involved in the stress response occurring during normal cell growth.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.597-609
• /
• 2014

To find out the effect of commercially available energy drinks on tooth enamel erosion, analyzed pH, buffering capacity, and the content of some of the inorganic components selecting 4 energy drinks that has high affinity of the products currently being sold. In addition, by observing the degree of erosion before and after immersion in energy drink by surface microhardness and scanning electron microscope (SEM) the results were as follows: Acidity of energy drink 'Burn Intense' was the lowest as $2.78{\pm}0.01$ highest on distilled water as $6.475{\pm}0.01$. 'Burn Intense' buffering capacity was $3.48{\pm}0.155$ at pH 5.5, $1.88{\pm}0.15$ at pH 7.0 which is the highest, and 'Hot6' was $1.71{\pm}0.37$, $1.23{\pm}0.35$ on each of it showing the lowest points. Ca content on energy drink was the highest at 'Volt Energy' as ($77.21{\pm}2.70mg/kg$), the lowest at 'Hot6' as ($0.98{\pm}0.05mg/kg$). P content was the highest on 'Hot6'($1.34{\pm}0.05mg/kg$) and detected at 'Red Bull'. Enamel surface hardness variation of the energy drinks before and after immersion showed rapid decrease at 'Red Bull' ($66.65{\pm}35.60$), and 'Volt Energy' ($61.96{\pm}31.42$), 'Burn Intense' ($58.53{\pm}24.84$), 'Hot6' ($53.99{\pm}60.26$) was in order. Distilled water, the control group, showed significant difference with the experimental group (p<0.05). But there was no significant difference between energy drinks. At SEM observation and analysis, 'Burn Intense' was the most severe demineralization, 'Volt Energy', 'Hot6', 'Red Bull', distilled water was in order. In the above results, taken together there were no statistically differences between energy drinks but significant difference in comparison with distilled water. In addition, at SEM observation and analysis all energy drink caused dental erosion, especially 'Burn Intense', has the lowest acidity, was serious. Thus, it is believed to provide a variety of oral health education and information about energy drinks that can affect the erosion of the teeth so public have the right to be recognized and reasonable dental care.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.129-135
• /
• 2012

This study was to investigate the heavy metal content of 55 commercial salts in the Seoul area. There were 22 types of solar sea salt, 17 types of processed salt and 16 types of reworked salt. Looked at another way, there were 22 types of domestic salt and 33 types of salt imported from France, the U.S., Japan, Australia, New Zealand, and Argentina. The samples were measured using both a mercury analyzer and an Inductively-Coupled Plasma Optical Emission Spectrometer (ICP-OES). The average heavy metal contents for commercial salts were Pb $0.281{\pm}0.344$, Cd $0.035{\pm}0.221$, Cr $0.364{\pm}0.635$, Cu $0.182{\pm}0.313$, As $0.046{\pm}0.062$, Ni $0.155{\pm}0.247$, Al $5.753{\pm}10.746$, Co $0.028{\pm}0.211$ and Hg $0.001{\pm}0.001$ mg/kg. The leads were detected highly in solar sea salt rather than in processed salt or reworked salt. Also chrome, arsenic and nickel were found more in processed salt. There were large differences in aluminum content between imported solar sea salt and processed salt. Aluminum was highly detected in French products, showing that salt can be affected by regional differences. The weekly average intakes of Pb, Cd, Cr, Cu, and Hg from commercial salt were 1.652% (0.000~6.754), 0.372% (0.000~7.214), 3.177% (0.000~26.279), 0.008% (0.001~0.049), and 0.031% (0.000~0.094) respectively compared with Provisional Tolerable Weekly Intakes established by the Joint FAO/WHO Expert Committee for the evaluation of food safety. The content of heavy metals from commercial salts was determined to be at safe levels.